NELSON Worldwide
Join to apply for the
Technical Designer III - Retail
role at
NELSON Worldwide
Location: Cincinnati, OH
We are currently seeking a
Technical Designer III
to join our
Retail Practice . The Technical Designer III is responsible for developing, organizing, and executing the development of construction documents utilizing creativity, foresight, and judgment to meet project requirements and objectives through project completion. They will participate as a member of the project team in all aspects of preparing complete and comprehensive architectural construction drawings and specifications and coordinate the documents with project consultants and contractors.
Attributes to support the NELSON Culture: Guiding Principles
Culture of Transformation: Act as a community to accelerate firm impact
Dedicated to Progression: A 360 approach to innovation and design
Enable Engagement: Storytelling that educates and inspires
Design with Purpose: Sustainable form and function
Qualifications To perform this job successfully, an individual must be able to perform each essential duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Critical features of this job are described under the headings below. They may be subject to change at any time due to reasonable accommodation or other reasons.
Essential Duties and Responsibilities include the following. Other duties may be assigned:
Participate in the design phase activities by providing expertise in detail development
Participate in all construction phase activities
Conduct existing conditions surveys and prepare architectural base plans, sections, elevations and details as appropriate to document relevant conditions
Review applicable building and accessibility codes and develop a list of criteria to be reflected in the design documents
Assist the design team by researching products and systems that accomplish the design intent
Prepare construction documents including, but not limited to: demolition plans; partition plans; reflected ceiling plans; telephone/electric/data plans; finish plans; large scale details plans; sections and elevations; detail drawings for millwork and cabinetry; schedules for doors, frames, hardware, architectural finishes and partition types; and construction specifications for all material, finish and product selections
Prepare bidding documents, general conditions and supplemental conditions that are part of the contract documents
Review and process all shop drawing/sample submissions and consult with the Studio Manager, Project Manager, and Project Designer, as appropriate, to ensure that the design intent is being maintained
Participate in the punch list process
Lead, facilitate, and manage the overall design process for moderately complex projects independently and support larger complex projects under supervision
Contribute to developing fee proposals
Develop innovative design concepts which are practical, aesthetic, safe and conducive to intended purposes and function which is reflective of client goals and within project budget
Selection and specification of materials, products, and architectural systems
Assists Project Manager in sub-contracting or the coordination of sub-consultant’s work
Lead the Construction Administration phase responding to RFI’s, CO’s, reviewing shop drawings and involved in the field site reviews
Ensure project documentation is compliant with NELSON standard for all projects and processes
Develops solutions to technical and design problems following established standards
Prepares 2D and 3D presentation/design drawings
Provide research and compile data during project phases
Prepare and modify interior architectural documents, elevations, sections, details, etc.
Supports the team in collecting information for client assessment; may attend interviews, provide documentation support
Conduct design charrettes and lead project team meetings
Complete timesheet and expense reports accurately and on-time
Assist with the schematic phases as directed (sketching, input of sketches, modification of schematic test fit plans, etc.)
Required Knowledge And Skills:
Knowledge of expectations related to high-quality service to clients
Advanced knowledge of design, trends, construction methodology, materials application and manufacturer-supplier appropriateness; consistently share such knowledge with teammates
Advanced knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models
Advanced knowledge of furniture, fixture and equipment (FF&E), architectural/interior finishes, lighting, art signage, color and materials to carry out design intent
Advanced knowledge of sustainability, integrated design and LEED guidelines
Advanced understanding of building regulations, life safety codes and ADA requirements
Advanced understanding of project budgets and schedules
Advanced knowledge of design techniques, tools, and processes involved in production of Construction Documents
Advanced knowledge of the construction process as it relates to the drawings being produced
Ability to organize and prioritize tasks as needed to complete within the identified time frame
Qualifications:
Bachelor’s degree in Architecture, Architectural Drafting, or related field
7+ years of relevant industry experience
Highly proficient in both Revit and AutoCAD
Familiarity with Photoshop and/or InDesign preferred
Must be deadline-oriented
Strong attention to detail
National salary range: $60,000 – $90,000 (compensation factors are based upon years of relevant experience, qualifications/licensure, education, and location.) Additional compensation includes bonuses and benefits. Bonuses can include but are not limited to: Long Term Incentive Plan, Short Term Incentive Plan, Profit Sharing
Benefits of NELSON
401(K) plan with company match
Full health benefits including medical, dental, and vision
Wellness program with rewards for healthy activities
Pet Insurance
Opportunities for career advancement
Paid time off and holiday pay
Paid parental leave
Flexible working schedules and work from home options based on client’s needs
Professional Development including discretionary support and reimbursement for registrations, certifications, and membership to a professional organization
NELSON and its related affiliates are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, ancestry, religion, sex, sexual orientation, gender identity or expression, transgender, national origin, status as a protected veteran, disability or any other classification protected by law.
Referrals increase your chances of interviewing at NELSON Worldwide by 2x
Get notified about new Technical Designer jobs in
Cincinnati Metropolitan Area .
#J-18808-Ljbffr
Technical Designer III - Retail
role at
NELSON Worldwide
Location: Cincinnati, OH
We are currently seeking a
Technical Designer III
to join our
Retail Practice . The Technical Designer III is responsible for developing, organizing, and executing the development of construction documents utilizing creativity, foresight, and judgment to meet project requirements and objectives through project completion. They will participate as a member of the project team in all aspects of preparing complete and comprehensive architectural construction drawings and specifications and coordinate the documents with project consultants and contractors.
Attributes to support the NELSON Culture: Guiding Principles
Culture of Transformation: Act as a community to accelerate firm impact
Dedicated to Progression: A 360 approach to innovation and design
Enable Engagement: Storytelling that educates and inspires
Design with Purpose: Sustainable form and function
Qualifications To perform this job successfully, an individual must be able to perform each essential duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Critical features of this job are described under the headings below. They may be subject to change at any time due to reasonable accommodation or other reasons.
Essential Duties and Responsibilities include the following. Other duties may be assigned:
Participate in the design phase activities by providing expertise in detail development
Participate in all construction phase activities
Conduct existing conditions surveys and prepare architectural base plans, sections, elevations and details as appropriate to document relevant conditions
Review applicable building and accessibility codes and develop a list of criteria to be reflected in the design documents
Assist the design team by researching products and systems that accomplish the design intent
Prepare construction documents including, but not limited to: demolition plans; partition plans; reflected ceiling plans; telephone/electric/data plans; finish plans; large scale details plans; sections and elevations; detail drawings for millwork and cabinetry; schedules for doors, frames, hardware, architectural finishes and partition types; and construction specifications for all material, finish and product selections
Prepare bidding documents, general conditions and supplemental conditions that are part of the contract documents
Review and process all shop drawing/sample submissions and consult with the Studio Manager, Project Manager, and Project Designer, as appropriate, to ensure that the design intent is being maintained
Participate in the punch list process
Lead, facilitate, and manage the overall design process for moderately complex projects independently and support larger complex projects under supervision
Contribute to developing fee proposals
Develop innovative design concepts which are practical, aesthetic, safe and conducive to intended purposes and function which is reflective of client goals and within project budget
Selection and specification of materials, products, and architectural systems
Assists Project Manager in sub-contracting or the coordination of sub-consultant’s work
Lead the Construction Administration phase responding to RFI’s, CO’s, reviewing shop drawings and involved in the field site reviews
Ensure project documentation is compliant with NELSON standard for all projects and processes
Develops solutions to technical and design problems following established standards
Prepares 2D and 3D presentation/design drawings
Provide research and compile data during project phases
Prepare and modify interior architectural documents, elevations, sections, details, etc.
Supports the team in collecting information for client assessment; may attend interviews, provide documentation support
Conduct design charrettes and lead project team meetings
Complete timesheet and expense reports accurately and on-time
Assist with the schematic phases as directed (sketching, input of sketches, modification of schematic test fit plans, etc.)
Required Knowledge And Skills:
Knowledge of expectations related to high-quality service to clients
Advanced knowledge of design, trends, construction methodology, materials application and manufacturer-supplier appropriateness; consistently share such knowledge with teammates
Advanced knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models
Advanced knowledge of furniture, fixture and equipment (FF&E), architectural/interior finishes, lighting, art signage, color and materials to carry out design intent
Advanced knowledge of sustainability, integrated design and LEED guidelines
Advanced understanding of building regulations, life safety codes and ADA requirements
Advanced understanding of project budgets and schedules
Advanced knowledge of design techniques, tools, and processes involved in production of Construction Documents
Advanced knowledge of the construction process as it relates to the drawings being produced
Ability to organize and prioritize tasks as needed to complete within the identified time frame
Qualifications:
Bachelor’s degree in Architecture, Architectural Drafting, or related field
7+ years of relevant industry experience
Highly proficient in both Revit and AutoCAD
Familiarity with Photoshop and/or InDesign preferred
Must be deadline-oriented
Strong attention to detail
National salary range: $60,000 – $90,000 (compensation factors are based upon years of relevant experience, qualifications/licensure, education, and location.) Additional compensation includes bonuses and benefits. Bonuses can include but are not limited to: Long Term Incentive Plan, Short Term Incentive Plan, Profit Sharing
Benefits of NELSON
401(K) plan with company match
Full health benefits including medical, dental, and vision
Wellness program with rewards for healthy activities
Pet Insurance
Opportunities for career advancement
Paid time off and holiday pay
Paid parental leave
Flexible working schedules and work from home options based on client’s needs
Professional Development including discretionary support and reimbursement for registrations, certifications, and membership to a professional organization
NELSON and its related affiliates are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, ancestry, religion, sex, sexual orientation, gender identity or expression, transgender, national origin, status as a protected veteran, disability or any other classification protected by law.
Referrals increase your chances of interviewing at NELSON Worldwide by 2x
Get notified about new Technical Designer jobs in
Cincinnati Metropolitan Area .
#J-18808-Ljbffr