HSAGP Energy
1 week ago Be among the first 25 applicants
Mechanical technician in Utility responsible for managing various mechanical facilities and their parts including air compressor, boiler, chiller, clean/dry room facilities, firefighting facilities, HVAC, and infra. Its main tasks include regular status check, fueling, replacement, and cleaning. This position is also required to take appropriate measures when there is any malfunction or damage of facilities.
Job Duties and Responsibilities Air Compressor Facility Maintenance
Check and inject compressor motor oil if needed
Disassemble and check compressor filters. Replace filter parts if needed
Disassemble and cleanse compressor auto drain trap
Run test operation of compressor
Run test operation of air dryer
Disassemble, cleanse, and test Air T/K (PA, IA) drain trap
Disassemble and check dryer filters. Replace filter parts if needed
NMP Recovery Facility Maintenance
Measure circulating pump vibration coefficient
Disassemble and cleanse circulating pump strainer regularly
Grease motors
Check tracing status before winter for freezing prevention
Check operation status of eye shower
Replace Fan V‑belt
A/C Tower Maintenance
Grease A/C towers and air supplying/exhausting fans
Replace V‑belt of A/C towers and air supplying/exhausting fans
Steam Boiler Facility Maintenance
Replace and cleanse the micro-filter of water softener and purifier
Disassemble and clean the chemical line
Test LNG line instrument and leakage
Set (blow‑down), disassemble, and clean glass water gauge
Test upper/under part of blow‑down C/V function
Disassemble and maintain condensate pump strainer and heat transmitter
Disassemble and maintain DEMI pump strainer and heat transmitter
Disassemble and maintain deaerator, boosting pump strainer and heat transmitter
Grease and oil pump and run operation test
Measure boosting pump vibration coefficient
Grease and oil boiler fans and motors
Check and maintain heat transmitter and S/T of boiler fans and motors
Repair or replace boiler accessories and PG/TG
Measure fuel consumption and make adjustment if needed
Hot Oil Boiler Facility Maintenance
Test LNG line instrument and leakage
Grease and oil pump and run operation test
Eliminate air and moisture in the expansion tank
Measure hot‑oil boiler pump/fan vibration coefficient
Grease and oil boiler fans and motors
Check and replace v‑belt of fan if needed
Chiller Facility Maintenance
Run operation test of chiller expansion tank line
Disassemble and maintain make‑up water strainer
Grease chiller cool water pump and remove strains
Grease chiller cooling water pump and remove strains
Inject chiller C/T (Cooling Tower) decelerator oil and run test operation
Grease chiller C/T fan motor and run test operation
BCU/BFU/FFU Maintenance
Check BCU differential pressure and replace medium filter
Replace BCU pre filter
Replace BFU/HFU filter
HVAC facility maintenance
Grease HVAC inner fan bearing
Check HVAC inner sensors and drainage status
Test differential pressure sensor operation
Disassemble and cleanse cool/steam/condensate water line strainers
Adjust tension of v‑belt and replace if needed
Replace HVAC filter regularly
Replace HVAC air vent and operate air purge
Repair and replace HVAC steam trap and PG/TG
EHP, PAC, Air Shower Facility Maintenance
Check EHP/PAC operational status, and outdoor unit pressure condition
Clean EHP/Package filter
Replace Air Shower filter
N2, NG Facility Maintenance
Check and replace the meter
Supervise PSC Popping test construction
Legal Inspection Management
Deal with regular inspection of government offices
Document/keep legal inspection logs and related documents
Facility Management
All: Create and update facility management history, inspection log, clean facilities and rooms
Boiler only: Supervise pipe cleaning work, prepare and respond to the legal inspections including open/in‑use inspections
Chiller only: Purchase and manage inventory of C/T chemicals
HVAC only: Supervise pipe cleaning work, prepare and respond to the legal inspections including open/in‑use inspections
Troubleshooting
Take appropriate measure when the facility is malfunctioning or damaged
Other tasks as necessary to meet the organization's objectives
Role Duties and Responsibilities
Perform routine tasks that can be performed after short‑term training
Work under direct supervision
Qualifications
Education:
High School Diploma or GED (General Education Development)
Associate degree in related field (Preferred)
Experience:
0‑2 years of relevant experience in EV battery, auto part, automobile industry, or similar high‑volume manufacturing in electric or chemical component
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English
Ability to write routine reports and correspondence in English
Basic skills in Microsoft Office (Excel, Word, PowerPoint, etc.)
Language skills:
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English
Ability to write routine reports and correspondence in English
Computer skills:
Basic skills in Microsoft Office (Excel, Word, PowerPoint, etc.)
Physical & Mental Demands:
In the office: Must wear company‑provided uniform
In the production site: Must wear company‑provided uniform and PPE, including safety shoes, safety helmet (hard hat), safety glasses, goggles, portable gas measuring device
In the A/C tower: Must wear dust‑proof mask
When exposed to NMP, hot oil: Additionally wear gas mask, dust‑proof mask, chemical resistant clothing
Work Environment: Usual office environment and production/construction site
Risk of noise: Above 90 dB in compressor room
Risk of high temperature: 104‑122 °F in boiler room, machine room, vacuum pump room
Potential exposure to hazardous materials (heating medium oil, NMP, water treatment chemicals, etc.)
Core Competencies
Understanding of UT facility
Troubleshooting ability to deal with facility malfunctions
Understanding of measuring tools and methods
Ability to manage and prioritize workload
Prepare routine documentation as required
Ability to solve problems related to utility (Mechanical)
Overcome fear of failure and strives to keep trying with a can‑do attitude and high level of enthusiasm
Take ownership of the tasks and complete it responsibly
Build cross‑functional relationships within and outside the organization and collaborate to achieve organizational goals through good communication and information sharing
Clearly understand the expectations and desires of others and clearly communicate with others through various forms of communication to achieve organizational goals
Continuously develop and secure knowledge and skills in related areas of work and utilize them appropriately in the organization
Always work with a problem‑solving mindset and strive to execute ideas for improvement into practice
Treat everyone with respect and sensitivity to differences among individuals due to language, cultural background
Derive logical conclusions even in somewhat difficult situation or from limited number of options available
#J-18808-Ljbffr
Mechanical technician in Utility responsible for managing various mechanical facilities and their parts including air compressor, boiler, chiller, clean/dry room facilities, firefighting facilities, HVAC, and infra. Its main tasks include regular status check, fueling, replacement, and cleaning. This position is also required to take appropriate measures when there is any malfunction or damage of facilities.
Job Duties and Responsibilities Air Compressor Facility Maintenance
Check and inject compressor motor oil if needed
Disassemble and check compressor filters. Replace filter parts if needed
Disassemble and cleanse compressor auto drain trap
Run test operation of compressor
Run test operation of air dryer
Disassemble, cleanse, and test Air T/K (PA, IA) drain trap
Disassemble and check dryer filters. Replace filter parts if needed
NMP Recovery Facility Maintenance
Measure circulating pump vibration coefficient
Disassemble and cleanse circulating pump strainer regularly
Grease motors
Check tracing status before winter for freezing prevention
Check operation status of eye shower
Replace Fan V‑belt
A/C Tower Maintenance
Grease A/C towers and air supplying/exhausting fans
Replace V‑belt of A/C towers and air supplying/exhausting fans
Steam Boiler Facility Maintenance
Replace and cleanse the micro-filter of water softener and purifier
Disassemble and clean the chemical line
Test LNG line instrument and leakage
Set (blow‑down), disassemble, and clean glass water gauge
Test upper/under part of blow‑down C/V function
Disassemble and maintain condensate pump strainer and heat transmitter
Disassemble and maintain DEMI pump strainer and heat transmitter
Disassemble and maintain deaerator, boosting pump strainer and heat transmitter
Grease and oil pump and run operation test
Measure boosting pump vibration coefficient
Grease and oil boiler fans and motors
Check and maintain heat transmitter and S/T of boiler fans and motors
Repair or replace boiler accessories and PG/TG
Measure fuel consumption and make adjustment if needed
Hot Oil Boiler Facility Maintenance
Test LNG line instrument and leakage
Grease and oil pump and run operation test
Eliminate air and moisture in the expansion tank
Measure hot‑oil boiler pump/fan vibration coefficient
Grease and oil boiler fans and motors
Check and replace v‑belt of fan if needed
Chiller Facility Maintenance
Run operation test of chiller expansion tank line
Disassemble and maintain make‑up water strainer
Grease chiller cool water pump and remove strains
Grease chiller cooling water pump and remove strains
Inject chiller C/T (Cooling Tower) decelerator oil and run test operation
Grease chiller C/T fan motor and run test operation
BCU/BFU/FFU Maintenance
Check BCU differential pressure and replace medium filter
Replace BCU pre filter
Replace BFU/HFU filter
HVAC facility maintenance
Grease HVAC inner fan bearing
Check HVAC inner sensors and drainage status
Test differential pressure sensor operation
Disassemble and cleanse cool/steam/condensate water line strainers
Adjust tension of v‑belt and replace if needed
Replace HVAC filter regularly
Replace HVAC air vent and operate air purge
Repair and replace HVAC steam trap and PG/TG
EHP, PAC, Air Shower Facility Maintenance
Check EHP/PAC operational status, and outdoor unit pressure condition
Clean EHP/Package filter
Replace Air Shower filter
N2, NG Facility Maintenance
Check and replace the meter
Supervise PSC Popping test construction
Legal Inspection Management
Deal with regular inspection of government offices
Document/keep legal inspection logs and related documents
Facility Management
All: Create and update facility management history, inspection log, clean facilities and rooms
Boiler only: Supervise pipe cleaning work, prepare and respond to the legal inspections including open/in‑use inspections
Chiller only: Purchase and manage inventory of C/T chemicals
HVAC only: Supervise pipe cleaning work, prepare and respond to the legal inspections including open/in‑use inspections
Troubleshooting
Take appropriate measure when the facility is malfunctioning or damaged
Other tasks as necessary to meet the organization's objectives
Role Duties and Responsibilities
Perform routine tasks that can be performed after short‑term training
Work under direct supervision
Qualifications
Education:
High School Diploma or GED (General Education Development)
Associate degree in related field (Preferred)
Experience:
0‑2 years of relevant experience in EV battery, auto part, automobile industry, or similar high‑volume manufacturing in electric or chemical component
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English
Ability to write routine reports and correspondence in English
Basic skills in Microsoft Office (Excel, Word, PowerPoint, etc.)
Language skills:
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals in English
Ability to write routine reports and correspondence in English
Computer skills:
Basic skills in Microsoft Office (Excel, Word, PowerPoint, etc.)
Physical & Mental Demands:
In the office: Must wear company‑provided uniform
In the production site: Must wear company‑provided uniform and PPE, including safety shoes, safety helmet (hard hat), safety glasses, goggles, portable gas measuring device
In the A/C tower: Must wear dust‑proof mask
When exposed to NMP, hot oil: Additionally wear gas mask, dust‑proof mask, chemical resistant clothing
Work Environment: Usual office environment and production/construction site
Risk of noise: Above 90 dB in compressor room
Risk of high temperature: 104‑122 °F in boiler room, machine room, vacuum pump room
Potential exposure to hazardous materials (heating medium oil, NMP, water treatment chemicals, etc.)
Core Competencies
Understanding of UT facility
Troubleshooting ability to deal with facility malfunctions
Understanding of measuring tools and methods
Ability to manage and prioritize workload
Prepare routine documentation as required
Ability to solve problems related to utility (Mechanical)
Overcome fear of failure and strives to keep trying with a can‑do attitude and high level of enthusiasm
Take ownership of the tasks and complete it responsibly
Build cross‑functional relationships within and outside the organization and collaborate to achieve organizational goals through good communication and information sharing
Clearly understand the expectations and desires of others and clearly communicate with others through various forms of communication to achieve organizational goals
Continuously develop and secure knowledge and skills in related areas of work and utilize them appropriately in the organization
Always work with a problem‑solving mindset and strive to execute ideas for improvement into practice
Treat everyone with respect and sensitivity to differences among individuals due to language, cultural background
Derive logical conclusions even in somewhat difficult situation or from limited number of options available
#J-18808-Ljbffr