Precision Castparts Corp. (PCC)
Makino Machinist Level 4
Precision Castparts Corp. (PCC), Los Angeles, California, United States, 90079
Location
Country: United States of America
State / County: California
City: North Hollywood
Division: EPD
Company: Avibank
Function: Operations
Workplace Type: On-Site
Position Type: Full Time
Opportunity ID 19269
Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description Position Summary Building upon level three, without assistance level four machinists demonstrate the ability to set up, run and trouble shoot all specific CNC and conventional machines and machining processes. They are also able to design and manufacture complex tooling. Leadership and mentoring skills are also expected of level four machinists. At least 6 years of experience.
Primary Duties & Responsibilities
Operate and set up CNC or conventional mills and lathes
Inspect produced components per blueprint using standard inspection techniques
Load/unload parts in provided work holding method per setup
Replace broken cutting tools/inserts as needed
Complete work order documentation in accordance with AS9100 quality standards
Load and check CNC program
Establish work and tooling offset information
Train other employees on operation and set up of CNC machines
Oversee operations of multiple CNC or conventional mills and lathes
Light Maintenance Duty of equipment
Required Skills To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Mathematical Skills Ability to add, subtract, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals.
Computer Skills To perform this job successfully, an individual should have knowledge of windows office suite and be well versed in CNC machining methods.
Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts.
Physical Requirements
Occasional lifting of up to 20 pounds
Frequently work near heavy machinery or equipment
Demands of a manufacturing environment
Required Experience 6-year minimum experience in aerospace/automotive machining or related industry. Strong knowledge of Fanuc, Haas, CELOS controllers. Preferred certifications in CNC operations. Background knowledge of AS9100 quality systems.
Level of Education High school diploma/GED equivalent required.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
For informational purposes only, the range of pay for this role is $30 to $45.00 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.
#J-18808-Ljbffr
State / County: California
City: North Hollywood
Division: EPD
Company: Avibank
Function: Operations
Workplace Type: On-Site
Position Type: Full Time
Opportunity ID 19269
Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
Job Description Position Summary Building upon level three, without assistance level four machinists demonstrate the ability to set up, run and trouble shoot all specific CNC and conventional machines and machining processes. They are also able to design and manufacture complex tooling. Leadership and mentoring skills are also expected of level four machinists. At least 6 years of experience.
Primary Duties & Responsibilities
Operate and set up CNC or conventional mills and lathes
Inspect produced components per blueprint using standard inspection techniques
Load/unload parts in provided work holding method per setup
Replace broken cutting tools/inserts as needed
Complete work order documentation in accordance with AS9100 quality standards
Load and check CNC program
Establish work and tooling offset information
Train other employees on operation and set up of CNC machines
Oversee operations of multiple CNC or conventional mills and lathes
Light Maintenance Duty of equipment
Required Skills To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Mathematical Skills Ability to add, subtract, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals.
Computer Skills To perform this job successfully, an individual should have knowledge of windows office suite and be well versed in CNC machining methods.
Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts.
Physical Requirements
Occasional lifting of up to 20 pounds
Frequently work near heavy machinery or equipment
Demands of a manufacturing environment
Required Experience 6-year minimum experience in aerospace/automotive machining or related industry. Strong knowledge of Fanuc, Haas, CELOS controllers. Preferred certifications in CNC operations. Background knowledge of AS9100 quality systems.
Level of Education High school diploma/GED equivalent required.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
For informational purposes only, the range of pay for this role is $30 to $45.00 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company's Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company's bonus multiple, based on the Company's performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company's medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company's 401(k) plan.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.
#J-18808-Ljbffr