Corbin Consulting Engineers
Tool Install Designer Corbin Consulting Engineers • Tempe, AZ, United States
Job Title Tool Install Designer
Location Tempe, AZ 85284 US (Primary)
Job Type Full-time
Education Bachelor's Degree
Overview We are seeking multiple tool install designers in each of the following disciplines: Mechanical, Electrical, and Structural for our Tempe office, who will work with a competent multi-discipline team of peers with a wide range of experience levels. This is an exciting opportunity to get in on the ground floor of a new office serving industry leaders.
Responsibilities
Semiconductor tool installation design. Tool types range from simple to complex, for a variety of semiconductor clients. Construction drawing deliverables include specification drawings, facility data tables, plan views, and details.
Field verification of existing conditions and available tool connection points in the facility.
Coordination with design team members.
Participation in client design review meetings and presentation of design strategies.
Services during construction, including field verification, site observation reports, responses to RFIs, and submittal reviews.
Discipline Responsibilities
Mechanical:
Perform calculations to size piping and ductwork for gas, mechanical, process, drain, and exhaust connections to tools, and validate existing lateral and facility point of connection capacity. Lead effort to obtain and organize tool connection, flow, and pressure information from multiple sources, including customer-supplied site prep guides and related documentation, review of existing design packages, and field verification of similar tools previously installed.
Electrical:
Perform calculations to size power overcurrent protection, conduit, and conductors to tools, and validate existing power panel, bus duct, and distribution board connection capacity. Perform voltage drop calculations and short circuit calculations to ensure available fault current at the tools does not exceed the tool's SCCR. Lead effort to obtain and organize tool power, telecom, and control cabling information from multiple sources, including customer-supplied site prep guides and related documentation, review of existing design packages, and field verification of similar tools previously installed.
Structural:
Perform calculations to verify tool anchorage requirements and to validate that facility building capacities are adequate to support the new tool. Lead effort to obtain and organize tool structural information from multiple sources, including customer-supplied site prep guides and related documentation, review of existing design packages, and field verification of similar tools previously installed.
Expectations
This is a mid- to senior-level position for applicants with tool install design experience.
Understanding of basic building code requirements.
Excellent interpersonal skills and a team player.
Excellent technical writing ability.
Highly organized.
Must show ownership and follow-through on assigned projects.
Interest in professional growth.
Ability to learn quickly and grasp new concepts, especially as they relate to engineering and construction.
Proficiency with Microsoft Office Suite.
Familiarity with AutoCAD and Revit is a plus.
Education and Experience
AS or equivalent degree from an accredited university is preferred.
3+ years of tool install design experience working for an architectural/engineering (A/E) consulting firm.
Experience with advanced technology and industrial clients is preferred.
Skills Please identify any relevant skills you might have, such as AutoCAD or Revit, or mechanical system modeling software such as PIPE-FLO, Trane Trace, Autodesk CFD, or AutoPIPE, or electrical systems modeling software such as Easypower or SKM, or structural system modeling software such as Risa or Risa3D. Include past work or volunteer experience in your response, including non-engineering roles if applicable.
Wages/Benefits
We offer a very competitive compensation package within the engineering consulting industry.
Flexible work hours.
Comprehensive medical, prescription, dental, and vision plans.
401(k) plan with company matching
Employee Stock Ownership Plan (ESOP), offering benefits of company ownership through accumulation of available stock in a tax-deferred retirement account.
Three weeks of Personal Time Off (PTO)
Eight paid holidays per year.
Up to $3000/year in yearly tuition reimbursement for coursework relevant to your position.
Employer paid Life Insurance & Long-Term Disability.
Opportunities to learn engineering outside of work, such as lunchtime seminars with industry experts and professional development hour compensation.
Equal Opportunity We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability status, protected status, or any other characteristic protected by law.
#J-18808-Ljbffr
Job Title Tool Install Designer
Location Tempe, AZ 85284 US (Primary)
Job Type Full-time
Education Bachelor's Degree
Overview We are seeking multiple tool install designers in each of the following disciplines: Mechanical, Electrical, and Structural for our Tempe office, who will work with a competent multi-discipline team of peers with a wide range of experience levels. This is an exciting opportunity to get in on the ground floor of a new office serving industry leaders.
Responsibilities
Semiconductor tool installation design. Tool types range from simple to complex, for a variety of semiconductor clients. Construction drawing deliverables include specification drawings, facility data tables, plan views, and details.
Field verification of existing conditions and available tool connection points in the facility.
Coordination with design team members.
Participation in client design review meetings and presentation of design strategies.
Services during construction, including field verification, site observation reports, responses to RFIs, and submittal reviews.
Discipline Responsibilities
Mechanical:
Perform calculations to size piping and ductwork for gas, mechanical, process, drain, and exhaust connections to tools, and validate existing lateral and facility point of connection capacity. Lead effort to obtain and organize tool connection, flow, and pressure information from multiple sources, including customer-supplied site prep guides and related documentation, review of existing design packages, and field verification of similar tools previously installed.
Electrical:
Perform calculations to size power overcurrent protection, conduit, and conductors to tools, and validate existing power panel, bus duct, and distribution board connection capacity. Perform voltage drop calculations and short circuit calculations to ensure available fault current at the tools does not exceed the tool's SCCR. Lead effort to obtain and organize tool power, telecom, and control cabling information from multiple sources, including customer-supplied site prep guides and related documentation, review of existing design packages, and field verification of similar tools previously installed.
Structural:
Perform calculations to verify tool anchorage requirements and to validate that facility building capacities are adequate to support the new tool. Lead effort to obtain and organize tool structural information from multiple sources, including customer-supplied site prep guides and related documentation, review of existing design packages, and field verification of similar tools previously installed.
Expectations
This is a mid- to senior-level position for applicants with tool install design experience.
Understanding of basic building code requirements.
Excellent interpersonal skills and a team player.
Excellent technical writing ability.
Highly organized.
Must show ownership and follow-through on assigned projects.
Interest in professional growth.
Ability to learn quickly and grasp new concepts, especially as they relate to engineering and construction.
Proficiency with Microsoft Office Suite.
Familiarity with AutoCAD and Revit is a plus.
Education and Experience
AS or equivalent degree from an accredited university is preferred.
3+ years of tool install design experience working for an architectural/engineering (A/E) consulting firm.
Experience with advanced technology and industrial clients is preferred.
Skills Please identify any relevant skills you might have, such as AutoCAD or Revit, or mechanical system modeling software such as PIPE-FLO, Trane Trace, Autodesk CFD, or AutoPIPE, or electrical systems modeling software such as Easypower or SKM, or structural system modeling software such as Risa or Risa3D. Include past work or volunteer experience in your response, including non-engineering roles if applicable.
Wages/Benefits
We offer a very competitive compensation package within the engineering consulting industry.
Flexible work hours.
Comprehensive medical, prescription, dental, and vision plans.
401(k) plan with company matching
Employee Stock Ownership Plan (ESOP), offering benefits of company ownership through accumulation of available stock in a tax-deferred retirement account.
Three weeks of Personal Time Off (PTO)
Eight paid holidays per year.
Up to $3000/year in yearly tuition reimbursement for coursework relevant to your position.
Employer paid Life Insurance & Long-Term Disability.
Opportunities to learn engineering outside of work, such as lunchtime seminars with industry experts and professional development hour compensation.
Equal Opportunity We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability status, protected status, or any other characteristic protected by law.
#J-18808-Ljbffr