Audubon Companies
Audubon is currently seeking a Civil/Structural Designer III to join our team in our Houston, TX office. The Civil/Structural Designer III will perform assignments associated with designing civil/structural equipment, components, structures or systems.
PRIMARY RESPONSIBILITIES :
* Prepare detailed drawings of parts and assemblies from layouts, designs and working drawings including necessary projections, sectional views and standard specifications.
* Interpret verbal or written direction to initiate a preliminary design.
* Perform basic calculations and trigonometry functions associated with area, volume, slope (rise & run), etc. using charts and tables, as required, to complete work assignments.
* Check and verify accuracy of drawings prepared by others.
* Prepare bills of material (BOM) and specifications when drawings are complete. Revise drawings and BOM consistent with engineering changes.
* Implement revisions and change control per company standards at the direction of senior level designers and engineers.
* Assemble information and reference drawings from a variety of sources.
* Continually look for product improvements and cost reductions.
* Determine and initiate drawings/models based on optimal views relative to communicating construction desires as applicable.
* Assist with performing field surveys, documenting existing conditions, and/or recommending various design solutions.
* Check field red-lined drawings and generate accurate as-built drawings as needed.
* Design components or portions of systems, and modify existing designs to develop or improve them.
* Utilize 2D or 3D computer aided design software to create layouts of civil/structural systems, devices and components, and create fabrication and assembly drawings.
* Create technical specifications to facilitate the procurement, fabrication, and installation of components.
* Create documentation required to process Engineering Change Orders (ECO).
* Utilize engineering sketches, specifications and supporting documents in the designing, detailing, documenting, and verifying of civil/structural parts, subassemblies, assemblies or system configurations.
* Identify dimensions, angles, curvatures, tolerances and materials necessary for optimal construction.
* Analyze the effect of proposed changes for proper fit and/or interference problems and recommend possible solutions or alternate construction options.
* Produce drawings and deliverables utilizing company standards within project-approved schedule and budget.
* Maintain proper file management in accordance with company and industry standards.
* Interact and communicate effectively with clients, subcontractors, vendors and other consultants.
* Perform field data gathering when required to complete project deliverables within approved project scope and schedule.
* Track and maintain a continued awareness of overall schedule and budget for assigned projects.
* Comply with all company and client health, safety, security and environmental (HSSE) standards as well as federal and local HSSE regulations.
* Actively participate in company and client hazard identification and observation programs, and immediately report any unsafe acts, conditions or incidents to your supervisor.
EXPERIENCE AND SKILL REQUIREMENTS :
* High School Diploma or GED required.
* Associate's Degree from a Technical Institution preferred.
* Minimum of 10+ years' of experience preferred.
* AutoCAD software experience required.
* CADWorx and PDMS software experience preferred.
* Microsoft Office software experience preferred.
* Field experience required.
* Experience in offshore oil & gas, onshore gas processing, hydrocarbon storage and transportation, chemical manufacturing or refining industry required.
* Small project lead experience required.
* Medium/Large project lead experience preferred.
* Ability to find a solution for or to deal proactively with work related problems.
* Ability to comprehend instructions and request clarification as necessary.
* Ability to work in a team oriented environment.
* Ability to think in such a way as to produce a new concept or idea.
* Ability to make decisions or take actions to solve a problem or reach a goal.
* Ability to accept responsibility and account for his/her actions.
* Ability to read and understand drawing markups to determine drafting requirements.
* Ability to utilize conventional drafting tools and CAD software to execute drafting requirements.
* Ability to read and understand engineering drawings.
No Recruiters, please!
Equal Opportunity Employer/Veterans/Disabled
PRIMARY RESPONSIBILITIES :
* Prepare detailed drawings of parts and assemblies from layouts, designs and working drawings including necessary projections, sectional views and standard specifications.
* Interpret verbal or written direction to initiate a preliminary design.
* Perform basic calculations and trigonometry functions associated with area, volume, slope (rise & run), etc. using charts and tables, as required, to complete work assignments.
* Check and verify accuracy of drawings prepared by others.
* Prepare bills of material (BOM) and specifications when drawings are complete. Revise drawings and BOM consistent with engineering changes.
* Implement revisions and change control per company standards at the direction of senior level designers and engineers.
* Assemble information and reference drawings from a variety of sources.
* Continually look for product improvements and cost reductions.
* Determine and initiate drawings/models based on optimal views relative to communicating construction desires as applicable.
* Assist with performing field surveys, documenting existing conditions, and/or recommending various design solutions.
* Check field red-lined drawings and generate accurate as-built drawings as needed.
* Design components or portions of systems, and modify existing designs to develop or improve them.
* Utilize 2D or 3D computer aided design software to create layouts of civil/structural systems, devices and components, and create fabrication and assembly drawings.
* Create technical specifications to facilitate the procurement, fabrication, and installation of components.
* Create documentation required to process Engineering Change Orders (ECO).
* Utilize engineering sketches, specifications and supporting documents in the designing, detailing, documenting, and verifying of civil/structural parts, subassemblies, assemblies or system configurations.
* Identify dimensions, angles, curvatures, tolerances and materials necessary for optimal construction.
* Analyze the effect of proposed changes for proper fit and/or interference problems and recommend possible solutions or alternate construction options.
* Produce drawings and deliverables utilizing company standards within project-approved schedule and budget.
* Maintain proper file management in accordance with company and industry standards.
* Interact and communicate effectively with clients, subcontractors, vendors and other consultants.
* Perform field data gathering when required to complete project deliverables within approved project scope and schedule.
* Track and maintain a continued awareness of overall schedule and budget for assigned projects.
* Comply with all company and client health, safety, security and environmental (HSSE) standards as well as federal and local HSSE regulations.
* Actively participate in company and client hazard identification and observation programs, and immediately report any unsafe acts, conditions or incidents to your supervisor.
EXPERIENCE AND SKILL REQUIREMENTS :
* High School Diploma or GED required.
* Associate's Degree from a Technical Institution preferred.
* Minimum of 10+ years' of experience preferred.
* AutoCAD software experience required.
* CADWorx and PDMS software experience preferred.
* Microsoft Office software experience preferred.
* Field experience required.
* Experience in offshore oil & gas, onshore gas processing, hydrocarbon storage and transportation, chemical manufacturing or refining industry required.
* Small project lead experience required.
* Medium/Large project lead experience preferred.
* Ability to find a solution for or to deal proactively with work related problems.
* Ability to comprehend instructions and request clarification as necessary.
* Ability to work in a team oriented environment.
* Ability to think in such a way as to produce a new concept or idea.
* Ability to make decisions or take actions to solve a problem or reach a goal.
* Ability to accept responsibility and account for his/her actions.
* Ability to read and understand drawing markups to determine drafting requirements.
* Ability to utilize conventional drafting tools and CAD software to execute drafting requirements.
* Ability to read and understand engineering drawings.
No Recruiters, please!
Equal Opportunity Employer/Veterans/Disabled