Senior Design Specialist - A (2D and 3D-S3D Electrical Designer)
Spectra Tech, Inc., Aiken, South Carolina, United States, 29805
DUTIES
Develop designs for complex engineering systems; prepare drawings and technical reports; participate in the development of design standards and procedures; perform technical review of design documents and specifications; provide engineering services support to construction activities; prepare and review design standards and procedures; prepare construction installation specifications and details; prepare procurement specifications and bid analysis; review and approve Design Change Forms; resolve existing design discrepancies with the most cost effective approach to meet design criteria; initiate Design Change Forms and coordinate with subcontractors or other responsible groups for approval/incorporation; provide dispositions to Nonconformance Reports and Field Problem Memos by determining a solution to the condition which will satisfy design criteria; perform inspections by facilities, systems, or components as required for proper evaluation of conditions; review construction procedures to ensure compliance with design engineering criteria and applicable codes; perform in-depth analyses of advanced technical concepts and devise new approaches to technical problems.
REQUIRED QUALIFICATIONS Education: An associate's degree in a technical discipline and at least 10–12 years of work experience, or 12–16 years of practical work experience.
In-depth knowledge of engineering systems, applications, calculations, materials, construction methods, and relevant computer applications.
Application of advanced principles and practices in engineering to resolve problems identified by construction organizations in a timely manner.
Continual updating on new technologies and hardware in the industry.
Ability to obtain and maintain a DOE "Q" security clearance; an active DOE clearance is not initially required but will be requested upon award based on specific work assignments.
ADDITIONAL DUTIES
Provide 2D-Microstation and 3D-S3D Electrical Designer staff augmentation support to SRNS, performing engineering analysis, 2D drawing development using MicroStation, and 3D modeling using Hexagon's S3D software; design development and generation of design output documents.
Prepare, review, and approve design change forms, disposition nonconformance reports, review vendor documents, and incorporate them into 2D drawings and 3D models, resolving construction issues.
Deliver design services using SRNS processes and procedures, with programmatic guidance from SRNS.
Perform weekly field walk‑downs of the job site for the engineering work being performed, including construction sites with uneven surfaces and work in progress.
ADDITIONAL EXPERIENCE QUALIFICATIONS
10 years of experience as an Electrical Designer, including equipment layout, grounding, raceway layout, lighting systems, schematics, and connection/Wiring diagrams.
Significant experience using 2D-Microstation and Hexagon's S3D software.
Working knowledge of National Census codes and standards for electrical design such as IEC, NEC, NFPA, NEMA, IEEE, and OSHA.
Attention to detail in producing quality documents.
Preferred: previous SRS Design Engineering or DOE facility experience.
Preferred: possession of an active DOE clearance (L or Q) within the past two years.
FIELD WALK‑DOWN REQUIREMENT Candidate must be able to perform weekly field walk‑downs of the job site for the engineering work being performed. These walk‑downs may involve construction sites with uneven surfaces and work in progress, walking for distances of over half a mile, climbing ladders to access remote areas, and dressing out in protective clothing.
#J-18808-Ljbffr
REQUIRED QUALIFICATIONS Education: An associate's degree in a technical discipline and at least 10–12 years of work experience, or 12–16 years of practical work experience.
In-depth knowledge of engineering systems, applications, calculations, materials, construction methods, and relevant computer applications.
Application of advanced principles and practices in engineering to resolve problems identified by construction organizations in a timely manner.
Continual updating on new technologies and hardware in the industry.
Ability to obtain and maintain a DOE "Q" security clearance; an active DOE clearance is not initially required but will be requested upon award based on specific work assignments.
ADDITIONAL DUTIES
Provide 2D-Microstation and 3D-S3D Electrical Designer staff augmentation support to SRNS, performing engineering analysis, 2D drawing development using MicroStation, and 3D modeling using Hexagon's S3D software; design development and generation of design output documents.
Prepare, review, and approve design change forms, disposition nonconformance reports, review vendor documents, and incorporate them into 2D drawings and 3D models, resolving construction issues.
Deliver design services using SRNS processes and procedures, with programmatic guidance from SRNS.
Perform weekly field walk‑downs of the job site for the engineering work being performed, including construction sites with uneven surfaces and work in progress.
ADDITIONAL EXPERIENCE QUALIFICATIONS
10 years of experience as an Electrical Designer, including equipment layout, grounding, raceway layout, lighting systems, schematics, and connection/Wiring diagrams.
Significant experience using 2D-Microstation and Hexagon's S3D software.
Working knowledge of National Census codes and standards for electrical design such as IEC, NEC, NFPA, NEMA, IEEE, and OSHA.
Attention to detail in producing quality documents.
Preferred: previous SRS Design Engineering or DOE facility experience.
Preferred: possession of an active DOE clearance (L or Q) within the past two years.
FIELD WALK‑DOWN REQUIREMENT Candidate must be able to perform weekly field walk‑downs of the job site for the engineering work being performed. These walk‑downs may involve construction sites with uneven surfaces and work in progress, walking for distances of over half a mile, climbing ladders to access remote areas, and dressing out in protective clothing.
#J-18808-Ljbffr