TE Connectivity
Assembly Operator V
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview
This opening is for an Assembly Operator V, using advanced skills to work directly with fiber optics. This person will be a key member of our team and will be responsible for optical connector and cable assembly, termination of various configurations of fiber optic cable assemblies, test station set up for various cable assemblies, advanced testing of cable assemblies, and will assist training new and existing employees. This individual will assist in process development and resolution of problems encountered in the process of bringing new optical products from concept to market. The position is expected to provide continuous improvement suggestions for the simplification of new products to reduce costs and increase overall manufacturing efficiency. The individual is to be a self-starter and have the ability to work well under schedule pressures and be able to balance workload as priorities change. Candidates need to have a strong work ethic with a desire to continually learn & with a concentrated focus on serving the Customer. The ideal candidate works well in teams, has the desire to learn, possesses strong hand-eye coordination, and maintains the attention to detail needed to make quality products for our customers. Every team member is responsible for maintaining housekeeping and organization of the work area, following safety guidelines and all TE Connectivity's policies and procedures. Shifts Available: 1st:
Mon-Fri, 7am-3:30pm 2nd:
Mon-Fri, 3pm-11:30pm (10% Shift Differential) Weekend:
Fri-Sun, start on 6/13 - 7AM-7:30PM (22% Shift differential) Job Requirements
Polish and test fiber optic cables
Assemble and package fiber optic connector components
Operate fiber router & complete over-molding process (as needed)
Support prototype product builds, test product builds, pre-release NPI builds (as needed)
Measure components using calipers, gages, or other measuring devices
Complete necessary operational paperwork required to maintain the traceability of product
Troubleshoot and perform minor repairs to equipment
Understand and demonstrate cleaning methods and contamination assessment for optical assembly.
Termination of various standard fiber optic termini as well new termini designs
Perform IL & RL testing of various configurations of cable assemblies
Perform EFG & IPC (workmanship) checks on both single & multi-fiber termini
Safely & efficiently operate equipment (E-Stop/Soft Stop), identify and resolve issues
Assist in the estimations of process step time durations
Assist in setting-up new manufacturing processes
Identify process changes to improve overall manufacturing efficiencies
Communicate within a team atmosphere to ensure clarity of purpose & Customer satisfaction
Proficient in providing high quality, accurate products, in a timely manner according to skills matrix
Use of Fiber Optic & Electronic Test Equipment: Optical Power Meters, IL/RL Test, Oscilloscope, DMM (Digital Multi Meter), Variable Power Supplies, Variable Attenuators, Optical & RF Switch
Train new and existing team members on products, process, and procedures.
Ability to perform advanced assembly process for numerous fiber optic products
Derive measurements from drawings
Inspect own work and products using quality standards, work instructions and prints.
Accountability - takes responsibility for his/her own work. Respects confidential information and concerns shared by others.
Available to work overtime to support production goals as needed
Ability to work in a clean room environment wearing all required clean room gowning garments and PPE (gowns, shoe booties, hair nets, nitrile gloves, safety glasses, safety shoes) What Your Background Should Look Like
High School diploma or GED preferred
Minimum of 3 years manufacturing experience required with knowledge and understanding of manufacturing principles such as Safety, Quality, Delivery, Inventory, and Productivity.
Minimum 2 years experience in a fiber optic manufacturing environment required
SAP Manufacturing & ISO 9001 experience is preferred.
Proficient Dexterity & Motor Skills for intricate/delicate work
Working knowledge of hand tools and blueprint reading preferred
Must be able to work with small parts in a clean room environment, using a microscope
Available to work overtime to support production goals as needed.
Must have good time management skills to work on numerous projects simultaneously
Attention to Detail (following bill of material, Routers, and understanding drawings/prints)
Team Oriented - will work effectively and cohesively with other employees to achieve required objectives and goals.
Credibility - takes responsibility for his/her own work. Respects confidential information and concerns shared by others.
A safe and quality conscious attitude and follow safety and quality requirements
Experience using electronic testing equipment such as Oscilloscope, DMM (Digital Multi Meter), Variable Power Supplies required
Excel skills to record, organize, & analyze data
Some post high school technical courses preferred
Familiarity of AutoCAD or similar program
Must be able to move materials weighing up to 50 pounds
Must be able to remain in stationary position 75% of the time
Must be able to operate machinery
Must be able to move between work zones
Must be proficient and able to understand written instructions in English language Competencies
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork
At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview
This opening is for an Assembly Operator V, using advanced skills to work directly with fiber optics. This person will be a key member of our team and will be responsible for optical connector and cable assembly, termination of various configurations of fiber optic cable assemblies, test station set up for various cable assemblies, advanced testing of cable assemblies, and will assist training new and existing employees. This individual will assist in process development and resolution of problems encountered in the process of bringing new optical products from concept to market. The position is expected to provide continuous improvement suggestions for the simplification of new products to reduce costs and increase overall manufacturing efficiency. The individual is to be a self-starter and have the ability to work well under schedule pressures and be able to balance workload as priorities change. Candidates need to have a strong work ethic with a desire to continually learn & with a concentrated focus on serving the Customer. The ideal candidate works well in teams, has the desire to learn, possesses strong hand-eye coordination, and maintains the attention to detail needed to make quality products for our customers. Every team member is responsible for maintaining housekeeping and organization of the work area, following safety guidelines and all TE Connectivity's policies and procedures. Shifts Available: 1st:
Mon-Fri, 7am-3:30pm 2nd:
Mon-Fri, 3pm-11:30pm (10% Shift Differential) Weekend:
Fri-Sun, start on 6/13 - 7AM-7:30PM (22% Shift differential) Job Requirements
Polish and test fiber optic cables
Assemble and package fiber optic connector components
Operate fiber router & complete over-molding process (as needed)
Support prototype product builds, test product builds, pre-release NPI builds (as needed)
Measure components using calipers, gages, or other measuring devices
Complete necessary operational paperwork required to maintain the traceability of product
Troubleshoot and perform minor repairs to equipment
Understand and demonstrate cleaning methods and contamination assessment for optical assembly.
Termination of various standard fiber optic termini as well new termini designs
Perform IL & RL testing of various configurations of cable assemblies
Perform EFG & IPC (workmanship) checks on both single & multi-fiber termini
Safely & efficiently operate equipment (E-Stop/Soft Stop), identify and resolve issues
Assist in the estimations of process step time durations
Assist in setting-up new manufacturing processes
Identify process changes to improve overall manufacturing efficiencies
Communicate within a team atmosphere to ensure clarity of purpose & Customer satisfaction
Proficient in providing high quality, accurate products, in a timely manner according to skills matrix
Use of Fiber Optic & Electronic Test Equipment: Optical Power Meters, IL/RL Test, Oscilloscope, DMM (Digital Multi Meter), Variable Power Supplies, Variable Attenuators, Optical & RF Switch
Train new and existing team members on products, process, and procedures.
Ability to perform advanced assembly process for numerous fiber optic products
Derive measurements from drawings
Inspect own work and products using quality standards, work instructions and prints.
Accountability - takes responsibility for his/her own work. Respects confidential information and concerns shared by others.
Available to work overtime to support production goals as needed
Ability to work in a clean room environment wearing all required clean room gowning garments and PPE (gowns, shoe booties, hair nets, nitrile gloves, safety glasses, safety shoes) What Your Background Should Look Like
High School diploma or GED preferred
Minimum of 3 years manufacturing experience required with knowledge and understanding of manufacturing principles such as Safety, Quality, Delivery, Inventory, and Productivity.
Minimum 2 years experience in a fiber optic manufacturing environment required
SAP Manufacturing & ISO 9001 experience is preferred.
Proficient Dexterity & Motor Skills for intricate/delicate work
Working knowledge of hand tools and blueprint reading preferred
Must be able to work with small parts in a clean room environment, using a microscope
Available to work overtime to support production goals as needed.
Must have good time management skills to work on numerous projects simultaneously
Attention to Detail (following bill of material, Routers, and understanding drawings/prints)
Team Oriented - will work effectively and cohesively with other employees to achieve required objectives and goals.
Credibility - takes responsibility for his/her own work. Respects confidential information and concerns shared by others.
A safe and quality conscious attitude and follow safety and quality requirements
Experience using electronic testing equipment such as Oscilloscope, DMM (Digital Multi Meter), Variable Power Supplies required
Excel skills to record, organize, & analyze data
Some post high school technical courses preferred
Familiarity of AutoCAD or similar program
Must be able to move materials weighing up to 50 pounds
Must be able to remain in stationary position 75% of the time
Must be able to operate machinery
Must be able to move between work zones
Must be proficient and able to understand written instructions in English language Competencies
Values: Integrity, Accountability, Inclusion, Innovation, Teamwork