WICHITA COMPANY LIMITED
Mechanic III
Wichita Company Limited
Join to apply for the Mechanic III role at Wichita Company Limited.
The City of Wichita is NOT an E-Verify Employer.
Responsibilities
Complete preventive maintenance on vehicles, trailers, or heavy equipment, such as oil changes, tire rotation, replacing filters, servicing transmissions, lubricating chassis and drive lines.
Perform engine and transmission diagnostics with scan tools or laptop computers. Conduct test drives to verify drivability complaints and verify the repairs made.
Diagnose and repair electrical systems.
Diagnose and repair air and hydraulic brake systems.
Diagnose and repair automatic and manual transmission drivability issues.
Diagnose and repair hydraulic system issues including pumps, motors, cylinders, valves, and other components on heavy vehicles and equipment.
Diagnose and repair driveline and suspension systems.
Diagnose and repair heating and air conditioning systems.
Diagnose, repair, rebuild, and replace diesel and gas engines.
Remove, replace, and modify mufflers, tailpipes, and other exhaust components.
Tow vehicles and equipment using a roll‑back and sling type wrecker.
Maintain written record of work performed.
Assume the responsibilities of supervisor in the supervisor’s absences.
Requirements
Thorough knowledge of all tools and equipment used in the trade and ability to use these tools to perform repair work on vehicles/equipment.
Knowledge of occupational hazards and safety precautions.
Ability to weld and cut using gas or electrical equipment.
Ability to read, interpret, and apply information contained in technical repair manuals and electronic diagnostic equipment.
Ability to climb onto equipment and make repairs as high as 25 feet in height.
Ability to lift, bend, and twist while making repairs to vehicles and heavy equipment.
Ability to tolerate exposure to fluids and solvents in vehicle repair work.
Ability to perform continuous manual and physical labor while standing on cement floor.
Ability to lift and carry bulky objects weighing up to 50 pounds (heavier objects with the assistance of another person) for distances up to 100 feet.
Ability to exert up to 100 pounds of pressure using tools that tighten, loosen, or cut.
Ability to develop and maintain effective working relationships with associates and employees of other departments.
Ability to communicate clearly and effectively orally or in writing.
Assumes the responsibilities of supervisor in the supervisor’s absences.
Must be highly proficient in utilizing diagnostic scan tools and other troubleshooting devices.
A valid Kansas driver’s license is required.
A valid Kansas commercial driver’s license (CDL) is required. If you are a Canadian or Mexican citizen, you will be required to have or obtain a CDL from your home country.
Compliance with ASE policy will be required at time of hire and throughout duration of employment.
Possession of at least four eligible ASE certifications when hired. Will require ASE certification attainment consistent with ASE policy. Preferred Certifications from Tracs A, E, L, and T.
Skill set will be the primary factor in determination.
Seniority level Mid‑Senior level
Employment type Full‑time
Job function Management and Manufacturing
Industries Industrial Machinery Manufacturing
Referrals increase your chances of interviewing at Wichita Company Limited by 2x.
#J-18808-Ljbffr
Join to apply for the Mechanic III role at Wichita Company Limited.
The City of Wichita is NOT an E-Verify Employer.
Responsibilities
Complete preventive maintenance on vehicles, trailers, or heavy equipment, such as oil changes, tire rotation, replacing filters, servicing transmissions, lubricating chassis and drive lines.
Perform engine and transmission diagnostics with scan tools or laptop computers. Conduct test drives to verify drivability complaints and verify the repairs made.
Diagnose and repair electrical systems.
Diagnose and repair air and hydraulic brake systems.
Diagnose and repair automatic and manual transmission drivability issues.
Diagnose and repair hydraulic system issues including pumps, motors, cylinders, valves, and other components on heavy vehicles and equipment.
Diagnose and repair driveline and suspension systems.
Diagnose and repair heating and air conditioning systems.
Diagnose, repair, rebuild, and replace diesel and gas engines.
Remove, replace, and modify mufflers, tailpipes, and other exhaust components.
Tow vehicles and equipment using a roll‑back and sling type wrecker.
Maintain written record of work performed.
Assume the responsibilities of supervisor in the supervisor’s absences.
Requirements
Thorough knowledge of all tools and equipment used in the trade and ability to use these tools to perform repair work on vehicles/equipment.
Knowledge of occupational hazards and safety precautions.
Ability to weld and cut using gas or electrical equipment.
Ability to read, interpret, and apply information contained in technical repair manuals and electronic diagnostic equipment.
Ability to climb onto equipment and make repairs as high as 25 feet in height.
Ability to lift, bend, and twist while making repairs to vehicles and heavy equipment.
Ability to tolerate exposure to fluids and solvents in vehicle repair work.
Ability to perform continuous manual and physical labor while standing on cement floor.
Ability to lift and carry bulky objects weighing up to 50 pounds (heavier objects with the assistance of another person) for distances up to 100 feet.
Ability to exert up to 100 pounds of pressure using tools that tighten, loosen, or cut.
Ability to develop and maintain effective working relationships with associates and employees of other departments.
Ability to communicate clearly and effectively orally or in writing.
Assumes the responsibilities of supervisor in the supervisor’s absences.
Must be highly proficient in utilizing diagnostic scan tools and other troubleshooting devices.
A valid Kansas driver’s license is required.
A valid Kansas commercial driver’s license (CDL) is required. If you are a Canadian or Mexican citizen, you will be required to have or obtain a CDL from your home country.
Compliance with ASE policy will be required at time of hire and throughout duration of employment.
Possession of at least four eligible ASE certifications when hired. Will require ASE certification attainment consistent with ASE policy. Preferred Certifications from Tracs A, E, L, and T.
Skill set will be the primary factor in determination.
Seniority level Mid‑Senior level
Employment type Full‑time
Job function Management and Manufacturing
Industries Industrial Machinery Manufacturing
Referrals increase your chances of interviewing at Wichita Company Limited by 2x.
#J-18808-Ljbffr