Designer, Tool
D&W Fine Pack, Fort Wayne, IN, United States
POSITION SUMMARY
The purpose of this position is to assist in the design and development of new commercial thermoformed food packaging tooling, as well as to help improve and analyze existing tooling by working closely with Corporate Engineering and Manufacturing. This individual will report to the Tool Engineering Manager.
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Safety
Follows all D&W Safety Rules and maintains an awareness of surroundings.
Reports unsafe conditions or hazards and uses the proper PPE for any work being performed.
Task
Assist in the design of new thermoforming, injection, and foil tooling to meet D&W Fine Pack standards
Assist in the design of replacement and insert thermoforming, injection, and foil tooling to meet D&W Fine Pack standards
Work with the tooling department to continuously improve current molds to meet new design standards established by the Tool Engineering department
Detail and file prints as required by Tool Designer II, III and Tool Design Manager
Responsible for creation and maintenance of all tooling Bill of Materials
Generate documentation with quality inspection information with critical dimensions
Update and maintain the tooling standards book
Participate in tool inspection process at tool vendor before shipment of new production tool
Assisting plants where required on tooling and machine repairs
Assist in CNC programming for internal CNC shop as needed
Assist in procurement of details required for fabrication and build of tooling including raw materials, cutters, and purchased details used for assembly
Help with inspection of internal tool builds
Assist in tool room as required i.e. machining, polishing, vacuum drilling, and assembly as required
Assist in set-up and tracking of TRP and CER projects in JobBoss and master project list
General & Administrative
Maintain a safe work environment
Track tool design time by project
Provides general engineering assistance when necessary
Perform tasks as assigned by Tool Design Manager and other managers as directed
Assist in the start-up of new production tooling as required Assist in the start-up of new production tooling as required
QUALIFICATIONS To perform this position successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities (KSA) required. Reasonable accommodation may be provided for individuals with disabilities to perform the essential functions.
EXPERIENCE
AS Engineering (Mechanical or Plastics preferred); or experience and/or training equivalent with education
1+ years of experience with specific background working in thermoforming product and tool engineering
3+ years relevant CAD experiences (Solid Works and DraftSight preferred) Mastercam programming knowledge a plus
1+ years of experience in hands-on machine shop operations; CNC set-up experience preferred
Knowledge of plastic material processes and materials
Experience in problem solving involving product design and tooling design/debug
Skilled in management of large and small projects
Excellent computer and communication (verbal and written) skills
More than a job. Grow, belong, and make a difference.
At
D&W Fine Pack,
we don’t just make packaging, we build purpose, pride, and strong teams. Whether you’re launching your career or bringing years of experience, this is a place where you can grow, be supported, and make a real impact. Our culture is built on four core values that guide everything we do:
CORE VALUES
Dedicated to Excellence– We hold ourselves to high standards in safety, sustainability, quality, and service.
Winning with Success– We keep improving to deliver more for our customers and community.
Focused on Service– We listen, act fast, and support both our customers and each other.
People with Purpose– We work as one team, showing respect, integrity, and care for all.
Benefits That Matter Taking care of our team is a priority. Our benefits include:
Medical, Dental, and Vision coverage
401k with company match
Short and Long-Term Disability (STD/LTD)
Company-paid Life Insurance
FSA’s for Medical & Dependent Care
Employee Assistance Program (EAP) – counseling, financial tools, legal help & more
Wellness program
Cancer Expert Now – access to expert consultations for cancer diagnosis and treatment guidance
And more!
If this sounds like the kind of company and team you want to grow with, we’d love to hear from you.
Work Environment While performing the duties of this position, the employee’s work is performed in a typical interior/office work environment. The employee is expected to maintain an organized work area and contribute to the overall decorum of a professional setting. A minimal amount of work will require exposure to the manufacturing facility. The employee is expected to be familiar with and compliant with all plant safety and cleanliness (GMP) regulations. Workdays are generally Monday through Friday; however, the employee is expected to work additional, including weekend, hours as required to fulfill job duties.
#J-18808-Ljbffr
ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Safety
Follows all D&W Safety Rules and maintains an awareness of surroundings.
Reports unsafe conditions or hazards and uses the proper PPE for any work being performed.
Task
Assist in the design of new thermoforming, injection, and foil tooling to meet D&W Fine Pack standards
Assist in the design of replacement and insert thermoforming, injection, and foil tooling to meet D&W Fine Pack standards
Work with the tooling department to continuously improve current molds to meet new design standards established by the Tool Engineering department
Detail and file prints as required by Tool Designer II, III and Tool Design Manager
Responsible for creation and maintenance of all tooling Bill of Materials
Generate documentation with quality inspection information with critical dimensions
Update and maintain the tooling standards book
Participate in tool inspection process at tool vendor before shipment of new production tool
Assisting plants where required on tooling and machine repairs
Assist in CNC programming for internal CNC shop as needed
Assist in procurement of details required for fabrication and build of tooling including raw materials, cutters, and purchased details used for assembly
Help with inspection of internal tool builds
Assist in tool room as required i.e. machining, polishing, vacuum drilling, and assembly as required
Assist in set-up and tracking of TRP and CER projects in JobBoss and master project list
General & Administrative
Maintain a safe work environment
Track tool design time by project
Provides general engineering assistance when necessary
Perform tasks as assigned by Tool Design Manager and other managers as directed
Assist in the start-up of new production tooling as required Assist in the start-up of new production tooling as required
QUALIFICATIONS To perform this position successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities (KSA) required. Reasonable accommodation may be provided for individuals with disabilities to perform the essential functions.
EXPERIENCE
AS Engineering (Mechanical or Plastics preferred); or experience and/or training equivalent with education
1+ years of experience with specific background working in thermoforming product and tool engineering
3+ years relevant CAD experiences (Solid Works and DraftSight preferred) Mastercam programming knowledge a plus
1+ years of experience in hands-on machine shop operations; CNC set-up experience preferred
Knowledge of plastic material processes and materials
Experience in problem solving involving product design and tooling design/debug
Skilled in management of large and small projects
Excellent computer and communication (verbal and written) skills
More than a job. Grow, belong, and make a difference.
At
D&W Fine Pack,
we don’t just make packaging, we build purpose, pride, and strong teams. Whether you’re launching your career or bringing years of experience, this is a place where you can grow, be supported, and make a real impact. Our culture is built on four core values that guide everything we do:
CORE VALUES
Dedicated to Excellence– We hold ourselves to high standards in safety, sustainability, quality, and service.
Winning with Success– We keep improving to deliver more for our customers and community.
Focused on Service– We listen, act fast, and support both our customers and each other.
People with Purpose– We work as one team, showing respect, integrity, and care for all.
Benefits That Matter Taking care of our team is a priority. Our benefits include:
Medical, Dental, and Vision coverage
401k with company match
Short and Long-Term Disability (STD/LTD)
Company-paid Life Insurance
FSA’s for Medical & Dependent Care
Employee Assistance Program (EAP) – counseling, financial tools, legal help & more
Wellness program
Cancer Expert Now – access to expert consultations for cancer diagnosis and treatment guidance
And more!
If this sounds like the kind of company and team you want to grow with, we’d love to hear from you.
Work Environment While performing the duties of this position, the employee’s work is performed in a typical interior/office work environment. The employee is expected to maintain an organized work area and contribute to the overall decorum of a professional setting. A minimal amount of work will require exposure to the manufacturing facility. The employee is expected to be familiar with and compliant with all plant safety and cleanliness (GMP) regulations. Workdays are generally Monday through Friday; however, the employee is expected to work additional, including weekend, hours as required to fulfill job duties.
#J-18808-Ljbffr