POWER MAKE-READY DESIGNER
Sigma Technologies, Ltd., Oklahoma City, OK, United States
POWER DISTRIBUTION & MAKE-READY DESIGNER (FIELD + DESIGN HYBRID)
Overhead Utility Pole Design | Joint-Use Engineering | Field Data Collection
Location: Remote (U.S.) Primary Field Focus: Oklahoma City and Surrounding Areas
ABOUT THIS OPPORTUNITY We are seeking an experienced Power Distribution / Make-Ready Designer who is comfortable owning the full lifecycle of utility pole design, from field data collection and walkouts through construction-ready engineering deliverables.
This role is ideal for designers who prefer to personally verify field conditions, understand how real‑world infrastructure impacts design decisions, and want to reduce handoff gaps between field and design teams.
Candidates must have prior experience in overhead utility pole design and NESC‑compliant make‑ready or power distribution engineering. This is not an entry‑level or field‑only role.
This position is remote but requires regular local fieldwork within the assigned territory, with occasional overnight travel as needed.
Applicants without prior experience in utility pole design or power distribution engineering will not be considered.
Note: New hires are required to attend a 2‑week paid, in‑person onboarding and training at our Perrysburg, Ohio headquarters.
WHAT YOU WILL DO Field Data Collection and Walkouts
Perform utility pole walkouts and field surveys to collect accurate attachment, clearance, and structural data
Verify pole ownership, attachment types, heights, spans, guying, and equipment in the field
Conduct kickoff or scope meetings as needed and document existing conditions
Capture photos, measurements, GPS data, and field notes to support design decisions
Research right‑of‑way, easements, permitting constraints, and property ownership
Design and Engineering
Execute overhead distribution and make‑ready designs in compliance with NESC and client standards
Evaluate field conditions and determine make‑ready requirements, attachment rearrangements, and pole replacements
Perform pole loading analysis and clearance resolution
Develop complete, construction‑ready design packages
Perform end‑to‑end joint‑use and/or general distribution design
Use design platforms such as DDS, AutoCAD, MicroStation, Katapult, O‑Calc, GIS, or utility‑specific systems
Collaborate with engineering, project management, and quality teams
Perform or support quality control reviews as required
TOP COMPETENCIES AND SKILLS
Make‑Ready Engineering
Power Distribution Design
Utility Pole Walkouts
Field Data Collection
Joint‑Use Design
Pole Loading Analysis
NESC Compliance
Overhead Distribution
Utility Pole Attachments
Right‑of‑Way and Permitting
Construction‑Ready Design
DDS, GIS for Utility Design
CAD for Utility Design
Aerial Design
Utility Coordination
WHAT WE’RE LOOKING FOR
High school diploma or equivalent required; associate degree or higher in engineering, drafting, or a related field preferred
Minimum 2 years of experience in make‑ready engineering, joint‑use design, or power distribution design (3+ years strongly preferred)
Demonstrated experience performing utility pole walkouts and field data collection specifically to support design work
Proven experience applying NESC standards, clearance analysis, and pole loading concepts
Proficiency with CAD or MicroStation; strong preference for experience with DDS, Katapult, O‑Calc, or similar utility design platforms
Strong understanding of overhead power distribution construction practices
Ability to work independently in the field and translate field conditions into accurate designs
Valid driver’s license, active auto insurance, and ability to pass background, drug, and motor vehicle screenings
Authorization to work in the United States
Willingness to perform regular local fieldwork with occasional overnight travel
Ability to work a Monday–Friday schedule aligned to Central Time, with flexibility for local field needs
PHYSICAL REQUIREMENTS
Ability to work extended periods using a computer for design and documentation
Ability to perform fieldwork, including driving, walking long distances, navigating uneven terrain, and working near roadways
Ability to lift and carry equipment weighing up to approximately 40 pounds
Visual acuity sufficient for field inspection, measurement, and design review
Ability to communicate effectively in both field and office environments
ABOUT SIGMA TECHNOLOGIES Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page. *If you do not have Power Design experience, please refer to our other open positions: https://bit.ly/TeamSigmaJobs *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
No‑cost monthly healthcare plan option for employees
Competitive pay
Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
401(k) plan with matching contributions up to 5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all‑inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
#J-18808-Ljbffr
Overhead Utility Pole Design | Joint-Use Engineering | Field Data Collection
Location: Remote (U.S.) Primary Field Focus: Oklahoma City and Surrounding Areas
ABOUT THIS OPPORTUNITY We are seeking an experienced Power Distribution / Make-Ready Designer who is comfortable owning the full lifecycle of utility pole design, from field data collection and walkouts through construction-ready engineering deliverables.
This role is ideal for designers who prefer to personally verify field conditions, understand how real‑world infrastructure impacts design decisions, and want to reduce handoff gaps between field and design teams.
Candidates must have prior experience in overhead utility pole design and NESC‑compliant make‑ready or power distribution engineering. This is not an entry‑level or field‑only role.
This position is remote but requires regular local fieldwork within the assigned territory, with occasional overnight travel as needed.
Applicants without prior experience in utility pole design or power distribution engineering will not be considered.
Note: New hires are required to attend a 2‑week paid, in‑person onboarding and training at our Perrysburg, Ohio headquarters.
WHAT YOU WILL DO Field Data Collection and Walkouts
Perform utility pole walkouts and field surveys to collect accurate attachment, clearance, and structural data
Verify pole ownership, attachment types, heights, spans, guying, and equipment in the field
Conduct kickoff or scope meetings as needed and document existing conditions
Capture photos, measurements, GPS data, and field notes to support design decisions
Research right‑of‑way, easements, permitting constraints, and property ownership
Design and Engineering
Execute overhead distribution and make‑ready designs in compliance with NESC and client standards
Evaluate field conditions and determine make‑ready requirements, attachment rearrangements, and pole replacements
Perform pole loading analysis and clearance resolution
Develop complete, construction‑ready design packages
Perform end‑to‑end joint‑use and/or general distribution design
Use design platforms such as DDS, AutoCAD, MicroStation, Katapult, O‑Calc, GIS, or utility‑specific systems
Collaborate with engineering, project management, and quality teams
Perform or support quality control reviews as required
TOP COMPETENCIES AND SKILLS
Make‑Ready Engineering
Power Distribution Design
Utility Pole Walkouts
Field Data Collection
Joint‑Use Design
Pole Loading Analysis
NESC Compliance
Overhead Distribution
Utility Pole Attachments
Right‑of‑Way and Permitting
Construction‑Ready Design
DDS, GIS for Utility Design
CAD for Utility Design
Aerial Design
Utility Coordination
WHAT WE’RE LOOKING FOR
High school diploma or equivalent required; associate degree or higher in engineering, drafting, or a related field preferred
Minimum 2 years of experience in make‑ready engineering, joint‑use design, or power distribution design (3+ years strongly preferred)
Demonstrated experience performing utility pole walkouts and field data collection specifically to support design work
Proven experience applying NESC standards, clearance analysis, and pole loading concepts
Proficiency with CAD or MicroStation; strong preference for experience with DDS, Katapult, O‑Calc, or similar utility design platforms
Strong understanding of overhead power distribution construction practices
Ability to work independently in the field and translate field conditions into accurate designs
Valid driver’s license, active auto insurance, and ability to pass background, drug, and motor vehicle screenings
Authorization to work in the United States
Willingness to perform regular local fieldwork with occasional overnight travel
Ability to work a Monday–Friday schedule aligned to Central Time, with flexibility for local field needs
PHYSICAL REQUIREMENTS
Ability to work extended periods using a computer for design and documentation
Ability to perform fieldwork, including driving, walking long distances, navigating uneven terrain, and working near roadways
Ability to lift and carry equipment weighing up to approximately 40 pounds
Visual acuity sufficient for field inspection, measurement, and design review
Ability to communicate effectively in both field and office environments
ABOUT SIGMA TECHNOLOGIES Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™.
*To learn more about working at Sigma, view our video and career page. *If you do not have Power Design experience, please refer to our other open positions: https://bit.ly/TeamSigmaJobs *While Designer openings are listed in multiple locations, you only need to apply to one, as they are remote roles.
WHAT WE OFFER
No‑cost monthly healthcare plan option for employees
Competitive pay
Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma
401(k) plan with matching contributions up to 5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all‑inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PM22
#J-18808-Ljbffr