Plant Layout Designer
Amrize, Dundee, MI, United States
Join Amrize as a Plant Layout Designer and help construct what's next. If you're ready to put your skills to work on projects that matter — and build a career with a company that’s building North America — we want to hear from you!
About The Role The plant designer provides state-of-the-art designs for existing and future operating plants during definition/planning/execution phases of CAPEX projects for Cement, Waste Management, Power, Logistic, Aggregate and Ready Mix, creating benefits in designing projects safely, on time, at lowest costs, on quality, right first and elaborates on one or more projects, in close cooperation with Engineering Managers, the Engineering Discipline Engineers, the necessary drawings/documents defining the scope of the project: The Plant Designer is responsible for elaborating and visualizing technically functional plant solutions that are safe, maintenance and operation friendly and cost effective. Execution of the design work shall be carried out in a timely and cost-effective manner, and shall comply with safety and technical guidelines, standards and methods.
What You’ll Accomplish
Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas.
Elaborate and develop, for all type of projects (greenfield, brownfield, debottlenecking, …) in PM&E scope and for all project phases, the necessary documents/drawings required for basic engineering and for tendering such as:
Mass flow diagram (contributes).
Plot plan, general layout
Flow Sheets/Flow chart of the proposed solution(s)
General arrangement drawings indicating dimensions.
Equipment list
Building schedule
Plant section lay-out
Single line diagram
2D and 3D Modeling (Navis Works, Revit, ACAD tools etc.)
Maintain and extend the plant design data base.
Communication: Reinforces the use of common language. Identifies, coordinates and disseminates manufacturing educational resources to facilitate shared learning and reinforces good practices.
Perform plant visit and survey to identify interactions/interferences with existing equipment.
Integrate investment cost reduction guidelines when developing plot plan, general layout, and plant section general arrangement.
Integrate safety in design methods and principles and country specific standards:
Define appropriate equipment
Develop and optimize design solutions with Group project stakeholders and suppliers
Directly accountable for the cost commitments and delivering projects on-time and within budget and will serve as a liaison between our suppliers and engineering group for effective design and plant optimization.
Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.
Responsibilities & Tasks
Responsible to do layout and design using 3-D Cad for major plant CAPEX projects ($10MM - $500MM).
Works directly with market area Operations Managers, Project Engineers and Plant Managers.
Coordinates with other Performance Specialists (Best Practices and Innovation).
Coordinates with other functional groups (Safety, Land and Environment).
What We’re Looking For Education:
Bachelor\'s degree preferred
Additional Education Preferred:
Field of Study Preferred: Civil Engineering
Required Work Experience:
3-5 years
Required Technical Skills
Good knowledge in current engineering design standards and tools specific to the cement industry
Good knowledge in reading mass flow and flow sheets including basic design principles and design calculations used in the cement industry.
Familiar with the various processes, material handling and logistic equipment used in the industry, 5 years in design of industrial cement plant facilities.
Experience in the cement manufacturing sector (working on operations, maintenance, design, new works, or supply of large cement plant projects).
Basic knowledge in project management
IT skills e.g., 2D and 3D CAD, Navis Works, Revit etc., MS Office and Engineering Base.
Experience and familiar with BIM design methodology
Travel Requirements : 30%
Additional Requirements
Strong technical background
Disciplined and process-oriented
Strong problem solving and analytical skills
Excellent people management skills: ability to influence
Strong work ethic
Action Oriented
Business Acumen
Integrity and Trust
Organizational Agility
Peer Relationships
Process Management
Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Subject to applicable law, employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.
Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
We thank all applicants for their interest; however, only those selected for an interview will be contacted.
#J-18808-Ljbffr
About The Role The plant designer provides state-of-the-art designs for existing and future operating plants during definition/planning/execution phases of CAPEX projects for Cement, Waste Management, Power, Logistic, Aggregate and Ready Mix, creating benefits in designing projects safely, on time, at lowest costs, on quality, right first and elaborates on one or more projects, in close cooperation with Engineering Managers, the Engineering Discipline Engineers, the necessary drawings/documents defining the scope of the project: The Plant Designer is responsible for elaborating and visualizing technically functional plant solutions that are safe, maintenance and operation friendly and cost effective. Execution of the design work shall be carried out in a timely and cost-effective manner, and shall comply with safety and technical guidelines, standards and methods.
What You’ll Accomplish
Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas.
Elaborate and develop, for all type of projects (greenfield, brownfield, debottlenecking, …) in PM&E scope and for all project phases, the necessary documents/drawings required for basic engineering and for tendering such as:
Mass flow diagram (contributes).
Plot plan, general layout
Flow Sheets/Flow chart of the proposed solution(s)
General arrangement drawings indicating dimensions.
Equipment list
Building schedule
Plant section lay-out
Single line diagram
2D and 3D Modeling (Navis Works, Revit, ACAD tools etc.)
Maintain and extend the plant design data base.
Communication: Reinforces the use of common language. Identifies, coordinates and disseminates manufacturing educational resources to facilitate shared learning and reinforces good practices.
Perform plant visit and survey to identify interactions/interferences with existing equipment.
Integrate investment cost reduction guidelines when developing plot plan, general layout, and plant section general arrangement.
Integrate safety in design methods and principles and country specific standards:
Define appropriate equipment
Develop and optimize design solutions with Group project stakeholders and suppliers
Directly accountable for the cost commitments and delivering projects on-time and within budget and will serve as a liaison between our suppliers and engineering group for effective design and plant optimization.
Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.
Responsibilities & Tasks
Responsible to do layout and design using 3-D Cad for major plant CAPEX projects ($10MM - $500MM).
Works directly with market area Operations Managers, Project Engineers and Plant Managers.
Coordinates with other Performance Specialists (Best Practices and Innovation).
Coordinates with other functional groups (Safety, Land and Environment).
What We’re Looking For Education:
Bachelor\'s degree preferred
Additional Education Preferred:
Field of Study Preferred: Civil Engineering
Required Work Experience:
3-5 years
Required Technical Skills
Good knowledge in current engineering design standards and tools specific to the cement industry
Good knowledge in reading mass flow and flow sheets including basic design principles and design calculations used in the cement industry.
Familiar with the various processes, material handling and logistic equipment used in the industry, 5 years in design of industrial cement plant facilities.
Experience in the cement manufacturing sector (working on operations, maintenance, design, new works, or supply of large cement plant projects).
Basic knowledge in project management
IT skills e.g., 2D and 3D CAD, Navis Works, Revit etc., MS Office and Engineering Base.
Experience and familiar with BIM design methodology
Travel Requirements : 30%
Additional Requirements
Strong technical background
Disciplined and process-oriented
Strong problem solving and analytical skills
Excellent people management skills: ability to influence
Strong work ethic
Action Oriented
Business Acumen
Integrity and Trust
Organizational Agility
Peer Relationships
Process Management
Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Subject to applicable law, employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.
Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
We thank all applicants for their interest; however, only those selected for an interview will be contacted.
#J-18808-Ljbffr