Electronics Technician InstallDispo
Crown Innovations, Inc., California, MO, United States
Electronics Technician
100% Travel | United States | Full-Time
Position Overview
Crown is seeking a highly motivated and skilled Electronics Installation/Disposition Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries.
This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, network, and supporting systems.
The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field.
Key Responsibilities
Electronic System Installation & Integration
Install, configure, align, test FAA related equipment to include but not to be limited to communication systems, voice control system, and systems as assigned
Setup and support electronic
etworking equipment
Connect and integrate Telco requirements including Commercial Telco, Field Cable, Fiber Optics, and VOIP communications
Install new radio racks, radios, and other Government/Vendor Furnished Equipment
Remove and properly dispose of legacy communications equipment, and create dispensation documentation
Perform baseline electronic readings and generate required documentation to satisfy customer/FAA requirements
Perform electronics testing procedures and coordinate frequency outages
Infrastructure & Physical Buildout
Mount and install antennas
Run and terminate coaxial cables and other communication cabling
Install and test grounding systems and implement surge protection measures
Perform basic electrical wiring and connections
Install and assemble equipment racks, cable trays, and electrical conduit
Ensure proper infrastructure to support the communication system
Engineering, Compliance & FAA Interface
Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams
Follow provided engineering packages and participate in required field modifications
Participate in pre-installation meetings
Interface with FAA Air Traffic and Technical Operations during installations
Work confidently in geographically isolated environments and create solutions to unique on-site challenges
Provide guidance and support to other installation and construction crew members
Communicate effectively with team members, management, and stakeholders
Understand the practical implications of electrical and electronic circuitry
Required Technical Experience
Demonstrated experience installing and maintaining electronic communication and networking equipment
Familiarity with FAA National Airspace (NAS) communications and networking systems, cabling, and equipment
Ability to read and interpret schematics, blueprints, and wiring diagrams
Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel)
Minimum Required Qualifications
Must be a U.S. Citizen
Must possess a valid driver’s license
Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system
Must be able to obtain a federal background screening security
Ability to generate required documentation
Understanding of Telco and networking equipment including Commercial Telco, RCL, Field Cable, VOIP, and Fiber Optics
Physical & Work Environment Requirements
Ability to stand, sit, crouch, and work in one position for extended periods
Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack
Ability to climb and work at heights exceeding 60 feet
Ability to occasionally perform work under severe time restraints
Must be in good physical condition and able to pass a physical fitness assessment if required
Schedule & Travel
Typical schedule is Monday through Friday.
Must be able to work non-standard hours depending on site requirements.
This is a 100% travel position.
Compensation
Hourly Rate Range: $20.00 to $49.00 per hour (W2)
Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations.
Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs.
Benefits
401K with company match
Comprehensive medical, dental, and vision plans
Generous PTO
Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability
#J-18808-Ljbffr
100% Travel | United States | Full-Time
Position Overview
Crown is seeking a highly motivated and skilled Electronics Installation/Disposition Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries.
This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, network, and supporting systems.
The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field.
Key Responsibilities
Electronic System Installation & Integration
Install, configure, align, test FAA related equipment to include but not to be limited to communication systems, voice control system, and systems as assigned
Setup and support electronic
etworking equipment
Connect and integrate Telco requirements including Commercial Telco, Field Cable, Fiber Optics, and VOIP communications
Install new radio racks, radios, and other Government/Vendor Furnished Equipment
Remove and properly dispose of legacy communications equipment, and create dispensation documentation
Perform baseline electronic readings and generate required documentation to satisfy customer/FAA requirements
Perform electronics testing procedures and coordinate frequency outages
Infrastructure & Physical Buildout
Mount and install antennas
Run and terminate coaxial cables and other communication cabling
Install and test grounding systems and implement surge protection measures
Perform basic electrical wiring and connections
Install and assemble equipment racks, cable trays, and electrical conduit
Ensure proper infrastructure to support the communication system
Engineering, Compliance & FAA Interface
Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams
Follow provided engineering packages and participate in required field modifications
Participate in pre-installation meetings
Interface with FAA Air Traffic and Technical Operations during installations
Work confidently in geographically isolated environments and create solutions to unique on-site challenges
Provide guidance and support to other installation and construction crew members
Communicate effectively with team members, management, and stakeholders
Understand the practical implications of electrical and electronic circuitry
Required Technical Experience
Demonstrated experience installing and maintaining electronic communication and networking equipment
Familiarity with FAA National Airspace (NAS) communications and networking systems, cabling, and equipment
Ability to read and interpret schematics, blueprints, and wiring diagrams
Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel)
Minimum Required Qualifications
Must be a U.S. Citizen
Must possess a valid driver’s license
Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system
Must be able to obtain a federal background screening security
Ability to generate required documentation
Understanding of Telco and networking equipment including Commercial Telco, RCL, Field Cable, VOIP, and Fiber Optics
Physical & Work Environment Requirements
Ability to stand, sit, crouch, and work in one position for extended periods
Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack
Ability to climb and work at heights exceeding 60 feet
Ability to occasionally perform work under severe time restraints
Must be in good physical condition and able to pass a physical fitness assessment if required
Schedule & Travel
Typical schedule is Monday through Friday.
Must be able to work non-standard hours depending on site requirements.
This is a 100% travel position.
Compensation
Hourly Rate Range: $20.00 to $49.00 per hour (W2)
Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations.
Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs.
Benefits
401K with company match
Comprehensive medical, dental, and vision plans
Generous PTO
Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability
#J-18808-Ljbffr