Industrial Maintenance Technician I - 2nd Shift
Michelman, Cincinnati, OH, United States
We have a great opportunity for an
Industrial Maintenance Technician I
to join our Maintenance team. This hands‑on position will be located in Blue Ash. You will be responsible for installing, maintaining, and repairing equipment around our facilities. Safety is taken extremely seriously, so you will be expected to adhere to all safety procedures and standards.
Primary Responsibilities
Use manual and powered hand tools to complete required maintenance.
Maintain facility and process equipment at base condition, to include interior and exterior service requests.
Disassemble and assemble process equipment to inspect for repair or replacement due to damage, defects, or wear.
Analyze test results, performance data, machine error messages, information obtained from operators, and direct observation to diagnose and return equipment to base condition.
Adjust process equipment to ensure optimal performance.
Operate or test newly repaired process equipment to verify process equipment is at base condition and operating per customer need.
Record all work performed in computerized maintenance management system, inclusive of inventory used to complete repair or replacement.
Clean, lubricate, inspect, and tighten process equipment components to maintain equipment at base condition.
Maintain and share ideas to improve site housekeeping, morale, site safety, work quality, customer delivery, parts inventories, and cost effectiveness.
Maintain compliance with internal and external training requirements, including arc flash training
Request materials for repairs through established internal processes.
Recognize and report hazards, correcting when possible, and asking for help when unable to correct.
Prepare and install electrical components per manufacturer and/or engineering requirements.
Physical Demands
Able to perform equipment maintenance tasks that may require bending, stooping, laying down or working from elevated platforms
Climb stairs and stand for extended periods of time
Safely life and move up to 50lbs
Use full range of motion with arms, hands and fingers to reach, grasp, hold, push/pull, twist, and work with tools
Wear required Personal Protective Equipment (PPE) for extended periods of time
Work outside when required
Critical Competencies, Knowledge, Skills, and Abilities
Experience utilizing a CMMS (Computerized maintenance management software) for task documentation
Knowledge of Lockout Tagout (LOTO) and confined space entry requirements
Safely operate a forklift with a forklift certification
Proven ability to think independently as part of a team and handle project from conception to completion
Proficient in standard business office software
Good oral, and written communications skills and has the ability to teach maintenance skills
Education and Experience
At least 3 years of experience in plant maintenance operations
Technical degree or certifications preferred
Experience with motors, variable frequency drives (VFDs), starters, power supplies, and transformers
Proficient at pipefitting and welding
Experience with batch mixing tanks, pressure vessels, extruders, conveyors, boilers, compressors, and general building repair
Work Hours
Michelman’s standard work hours for this role are Monday – Friday from 3:00 pm-11:00 pm ET.
We offer an excellent salary, incentive, and benefits package in a dynamic, empowered team environment.
It is Michelman, Inc. policy to seek and employ qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, religion, national origin, age, sexual orientation or disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Michelman is an Equal Opportunity Employer Minorities/Females/Disabled/Veterans
#J-18808-Ljbffr
Industrial Maintenance Technician I
to join our Maintenance team. This hands‑on position will be located in Blue Ash. You will be responsible for installing, maintaining, and repairing equipment around our facilities. Safety is taken extremely seriously, so you will be expected to adhere to all safety procedures and standards.
Primary Responsibilities
Use manual and powered hand tools to complete required maintenance.
Maintain facility and process equipment at base condition, to include interior and exterior service requests.
Disassemble and assemble process equipment to inspect for repair or replacement due to damage, defects, or wear.
Analyze test results, performance data, machine error messages, information obtained from operators, and direct observation to diagnose and return equipment to base condition.
Adjust process equipment to ensure optimal performance.
Operate or test newly repaired process equipment to verify process equipment is at base condition and operating per customer need.
Record all work performed in computerized maintenance management system, inclusive of inventory used to complete repair or replacement.
Clean, lubricate, inspect, and tighten process equipment components to maintain equipment at base condition.
Maintain and share ideas to improve site housekeeping, morale, site safety, work quality, customer delivery, parts inventories, and cost effectiveness.
Maintain compliance with internal and external training requirements, including arc flash training
Request materials for repairs through established internal processes.
Recognize and report hazards, correcting when possible, and asking for help when unable to correct.
Prepare and install electrical components per manufacturer and/or engineering requirements.
Physical Demands
Able to perform equipment maintenance tasks that may require bending, stooping, laying down or working from elevated platforms
Climb stairs and stand for extended periods of time
Safely life and move up to 50lbs
Use full range of motion with arms, hands and fingers to reach, grasp, hold, push/pull, twist, and work with tools
Wear required Personal Protective Equipment (PPE) for extended periods of time
Work outside when required
Critical Competencies, Knowledge, Skills, and Abilities
Experience utilizing a CMMS (Computerized maintenance management software) for task documentation
Knowledge of Lockout Tagout (LOTO) and confined space entry requirements
Safely operate a forklift with a forklift certification
Proven ability to think independently as part of a team and handle project from conception to completion
Proficient in standard business office software
Good oral, and written communications skills and has the ability to teach maintenance skills
Education and Experience
At least 3 years of experience in plant maintenance operations
Technical degree or certifications preferred
Experience with motors, variable frequency drives (VFDs), starters, power supplies, and transformers
Proficient at pipefitting and welding
Experience with batch mixing tanks, pressure vessels, extruders, conveyors, boilers, compressors, and general building repair
Work Hours
Michelman’s standard work hours for this role are Monday – Friday from 3:00 pm-11:00 pm ET.
We offer an excellent salary, incentive, and benefits package in a dynamic, empowered team environment.
It is Michelman, Inc. policy to seek and employ qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, religion, national origin, age, sexual orientation or disability. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Michelman is an Equal Opportunity Employer Minorities/Females/Disabled/Veterans
#J-18808-Ljbffr