Machinist III - Thread Grind - 2nd Shift
CIRCOR International, Inc., Monroe, NC, United States
Basic Function
Finish grind threads on all rotors to size, index, form, and finish as required.
Drill axial hole, cutoff, and counterbore as needed.
Grind end faces on idlers.
Status and Scope
With own judgement and minimal direction from others, produce a quality ground rotor in a safe and efficient manner.
Grind threads on all rotors – inspect sizes, index, form, lead, finish, etc.
Deburr all sharp edges as needed.
Check pump parts for burrs and fits.
Assemble per assembly drawing.
Test per specifications.
Equipment and Typical Parts
Operate one, two or more machines including NCTG, CFG, Cutoff, test stands, DHD, etc.
Use precision measuring equipment such as micrometer, dial caliper, profilometers, lead checker, gauge gauges, master, etc. to inspect rotors.
Operate electric or air‑powered crane/forklift.
Essential Physical Tasks
Lift, pull, push; continuously walk or move from one machine to as many as five; load and unload parts up to 40 pounds.
Deburr using a file or other hand tool such as a die grinder.
Clean parts and centers of chips and wipe dry.
Physically lift and check all dimensions machined to conform with finish drawing.
Adjust machine as needed to produce quality parts within specifications and standards per piece.
Use a multi‑function electric or air crane to lift, move, load, and unload parts to perform work‑center functions.
Step up to and down from an elevated work platform and onto various parts of the machine for wheel change, tool change, and cleaning.
Candidate Requirements
Education & Experience
High School Diploma or equivalent.
Machining trade school preferred and one to three years machining experience preferred.
Must be able to read blueprints.
Use of advanced trade mathematics, reading complicated drawings, specifications, charts, etc. preferred.
CIRCOR is an EEO Employer of Females / Minorities / Veterans / Individuals with Disabilities
#J-18808-Ljbffr
Finish grind threads on all rotors to size, index, form, and finish as required.
Drill axial hole, cutoff, and counterbore as needed.
Grind end faces on idlers.
Status and Scope
With own judgement and minimal direction from others, produce a quality ground rotor in a safe and efficient manner.
Grind threads on all rotors – inspect sizes, index, form, lead, finish, etc.
Deburr all sharp edges as needed.
Check pump parts for burrs and fits.
Assemble per assembly drawing.
Test per specifications.
Equipment and Typical Parts
Operate one, two or more machines including NCTG, CFG, Cutoff, test stands, DHD, etc.
Use precision measuring equipment such as micrometer, dial caliper, profilometers, lead checker, gauge gauges, master, etc. to inspect rotors.
Operate electric or air‑powered crane/forklift.
Essential Physical Tasks
Lift, pull, push; continuously walk or move from one machine to as many as five; load and unload parts up to 40 pounds.
Deburr using a file or other hand tool such as a die grinder.
Clean parts and centers of chips and wipe dry.
Physically lift and check all dimensions machined to conform with finish drawing.
Adjust machine as needed to produce quality parts within specifications and standards per piece.
Use a multi‑function electric or air crane to lift, move, load, and unload parts to perform work‑center functions.
Step up to and down from an elevated work platform and onto various parts of the machine for wheel change, tool change, and cleaning.
Candidate Requirements
Education & Experience
High School Diploma or equivalent.
Machining trade school preferred and one to three years machining experience preferred.
Must be able to read blueprints.
Use of advanced trade mathematics, reading complicated drawings, specifications, charts, etc. preferred.
CIRCOR is an EEO Employer of Females / Minorities / Veterans / Individuals with Disabilities
#J-18808-Ljbffr