
Operator; 2nd shift Spray Dryer
New AHF Colors-Please Use this, Crossville, TN, United States
Spray Dryer Operator, 2nd Shift, Plant 1
AHF Products has a job opportunity for a Spray Dryer Operator to be located in Crossville, TN. Reporting to the Powder Prep Supervisor.
JOB DUTIES
Keep powder running to the Press Department.
Clean lines and perform color changes when orders are complete.
Run and wash spray dryer when needed.
Vacuum Powder Silo decks and wash silos when empty
Perform basic maintenance (for example, replacing vacuum and dust collector hoses/belts/scrapers).
Work on Kaizen for continuous improvement.
Demonstrate understanding of operating Ball Mill Control Room, Color Mix Control Room, and Main Control Room.
Complete 5S and TPMs and all other necessary paperwork.
Operate a forklift and front-end loader.
Use Gemba board to effectively communicate issues.
Communicate effectively with co-workers, Supervisors, and other Departments as needed.
Perform start up and shutdown procedures, including cleaning.
Ensure that appropriate slip supplies are available.
Supervise the screening and electromagneting of all slip to be used.
Ensure that spray dried powder, after acceptance by the Technical Department, is delivered only to the powder slip for the correct color.
Cross-train in order to work all Powder Prep positions if needed:
Spray Dryer
Check lances to determine they are spraying well and change lances.
Perform startup, maintenance, and shutdown procedures, including cleaning.
Ensure that appropriate slip supplies are available.
Supervise the screening and electromagneting of all slip to be used.
Ensure that spray dried powder, after acceptance by the Technical Department, is delivered only to the powder slip for the correct color.
Measure silos and check cycle tanks and dump cyclone tanks if necessary.
Dump hoppers on deco line, kiln, and presses.
Clean bucket elevator during final fill and clean lines downstairs.
Clean spray dryer lines, clean sieves, wash spray dryer, and clean floor.
Complete moisture checks and density and viscosity testing.
Keep powder running to presses.
Make stain/color
Make batch corrections
Provide color to the spray dryer
Unload trucks to restock stain.
Clean sieves after each color at the end of the day, taking care of waste when full.
Lifting 55 lbs., hooking and unhooking hoses and moving hoses.
Ball Mill/Water Room Operator
Maintain and do testing on Ball Mill (density, viscosity, residue test)
Run turbo mixer to control water and greenware.
Load and unload scrap.
Deal with suppliers and truck drivers, keeping on track of material quantities.
Maintain water system and switch out membrane.
Feed material to Ball Mill weight belts and know feed rates.
Multi-task by watching belts, screens, etc., to ensure smooth operation.
Operate heavy equipment to load weigh box and push new incoming loads of clay.
Lifting grinding media that weighs 55 lbs.
Color correct mixers/tanks that have not been passed within the declared specs.
Lifting 55-100 lbs. of stain, depending on the color being made. This could consist of a few bags to 30+ bags.
Process the water used in the plant through a membrane system that takes particulate out of the water.
Install and rotate membrane as needed.
Handle various chemicals that are put in the process.
Work on Kaizen for continuous improvement.
Follow safety guidelines and company standards, using Personal Protection Equipment.
Adhere to company policies and procedures.
Maintain housekeeping standards to ensure a clean and safe workplace.
Perform any other duties that may be required or assigned.
JOB QUALIFICATIONS
Must be at least 18 years of age
Excellent organizational skills with attention to detail
Strong problem-solving skills
Positive attitude and strong work ethic
Strong verbal and written communication skills
Good interpersonal skills in dealing with employees, management, and vendors
Ability to work in a team environment
Must be able to work holidays.
Must be available to work overtime as necessary and work other shifts as necessary, may be called in during abnormal hours
Must pass a mandatory pre-employment drug test, physical, and criminal background check
PHYSICAL DEMANDS
Frequent climbing, bending, standing, walking at a brisk pace 8+ hours a day, squatting, reaching, pushing and pulling
Occasional lifting 80 pounds, either alone or with the assistance of another employee, in conformity with lifting techniques detailed in safety policies and training materials
Frequent dexterity with hands for use of tools
Frequently vision must be sufficient to see tools and equipment clearly
Frequent hearing with the use of ear protection
Frequent ability to tolerate and work at heights
MENTAL DEMANDS
Think analytically
Develop options and implement solutions
Work with a team
Maintain regular and punctual attendance (consistent with ADA and/or FMLA)
Multitask in a fast-paced environment
Work with a Sense of Urgency
AHF Products provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Equal Opportunity Employer. This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr
AHF Products has a job opportunity for a Spray Dryer Operator to be located in Crossville, TN. Reporting to the Powder Prep Supervisor.
JOB DUTIES
Keep powder running to the Press Department.
Clean lines and perform color changes when orders are complete.
Run and wash spray dryer when needed.
Vacuum Powder Silo decks and wash silos when empty
Perform basic maintenance (for example, replacing vacuum and dust collector hoses/belts/scrapers).
Work on Kaizen for continuous improvement.
Demonstrate understanding of operating Ball Mill Control Room, Color Mix Control Room, and Main Control Room.
Complete 5S and TPMs and all other necessary paperwork.
Operate a forklift and front-end loader.
Use Gemba board to effectively communicate issues.
Communicate effectively with co-workers, Supervisors, and other Departments as needed.
Perform start up and shutdown procedures, including cleaning.
Ensure that appropriate slip supplies are available.
Supervise the screening and electromagneting of all slip to be used.
Ensure that spray dried powder, after acceptance by the Technical Department, is delivered only to the powder slip for the correct color.
Cross-train in order to work all Powder Prep positions if needed:
Spray Dryer
Check lances to determine they are spraying well and change lances.
Perform startup, maintenance, and shutdown procedures, including cleaning.
Ensure that appropriate slip supplies are available.
Supervise the screening and electromagneting of all slip to be used.
Ensure that spray dried powder, after acceptance by the Technical Department, is delivered only to the powder slip for the correct color.
Measure silos and check cycle tanks and dump cyclone tanks if necessary.
Dump hoppers on deco line, kiln, and presses.
Clean bucket elevator during final fill and clean lines downstairs.
Clean spray dryer lines, clean sieves, wash spray dryer, and clean floor.
Complete moisture checks and density and viscosity testing.
Keep powder running to presses.
Make stain/color
Make batch corrections
Provide color to the spray dryer
Unload trucks to restock stain.
Clean sieves after each color at the end of the day, taking care of waste when full.
Lifting 55 lbs., hooking and unhooking hoses and moving hoses.
Ball Mill/Water Room Operator
Maintain and do testing on Ball Mill (density, viscosity, residue test)
Run turbo mixer to control water and greenware.
Load and unload scrap.
Deal with suppliers and truck drivers, keeping on track of material quantities.
Maintain water system and switch out membrane.
Feed material to Ball Mill weight belts and know feed rates.
Multi-task by watching belts, screens, etc., to ensure smooth operation.
Operate heavy equipment to load weigh box and push new incoming loads of clay.
Lifting grinding media that weighs 55 lbs.
Color correct mixers/tanks that have not been passed within the declared specs.
Lifting 55-100 lbs. of stain, depending on the color being made. This could consist of a few bags to 30+ bags.
Process the water used in the plant through a membrane system that takes particulate out of the water.
Install and rotate membrane as needed.
Handle various chemicals that are put in the process.
Work on Kaizen for continuous improvement.
Follow safety guidelines and company standards, using Personal Protection Equipment.
Adhere to company policies and procedures.
Maintain housekeeping standards to ensure a clean and safe workplace.
Perform any other duties that may be required or assigned.
JOB QUALIFICATIONS
Must be at least 18 years of age
Excellent organizational skills with attention to detail
Strong problem-solving skills
Positive attitude and strong work ethic
Strong verbal and written communication skills
Good interpersonal skills in dealing with employees, management, and vendors
Ability to work in a team environment
Must be able to work holidays.
Must be available to work overtime as necessary and work other shifts as necessary, may be called in during abnormal hours
Must pass a mandatory pre-employment drug test, physical, and criminal background check
PHYSICAL DEMANDS
Frequent climbing, bending, standing, walking at a brisk pace 8+ hours a day, squatting, reaching, pushing and pulling
Occasional lifting 80 pounds, either alone or with the assistance of another employee, in conformity with lifting techniques detailed in safety policies and training materials
Frequent dexterity with hands for use of tools
Frequently vision must be sufficient to see tools and equipment clearly
Frequent hearing with the use of ear protection
Frequent ability to tolerate and work at heights
MENTAL DEMANDS
Think analytically
Develop options and implement solutions
Work with a team
Maintain regular and punctual attendance (consistent with ADA and/or FMLA)
Multitask in a fast-paced environment
Work with a Sense of Urgency
AHF Products provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Equal Opportunity Employer. This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr