CNC Technician - Trimming
Redwire Corporation, San Luis Obispo, CA, United States
Job Title
CNC Technician
Work Location
San Luis Obispo, CA
FLSA Status
Non-Exempt
Salary Range
The anticipated salary range for this role is $23.00 to $35.00 per hour. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate's qualifications, experience, geographical location, and internal alignment.
Summary
In Composites Fabrication, the CNC Technician performs 3D printing, machining, assembly, balancing, and testing of composites fabrication parts to ensure that JAI production needs are met. A CNC technician with extensive experience may be asked to participate in improving new tooling, parts, and processes.
Responsibilities
The following job functions are a basic requirement but are not limited to and may be assigned other duties.
Receives follow verbal and written instructions to configure and manufacture components
Work on the CNC machines, 3D printers, foam cutting room, Eastman kitting station, and blade balancing room
Operate CNC machinery to fabricate parts
Balance propeller blades for the production team
Prioritize work to consistently meet part demand
Load and unload raw materials and equipment
Set up and calibrate accessories and equipment
Perform necessary maintenance and cleaning of equipment
Supervise machines as they run and adjust as needed
Inspect finished product to ensure it meets required specifications
Report progress and challenges to the fabrication supervisor or CNC operations lead
Assist engineering and other production staff in resolving issues related to equipment and processes as required
Filling out travelers and documenting components' progress through the shop
Ability to comply with safety guidelines
Following all office procedures, including tracking hours and cleaning up workspaces
Support miscellaneous production, design, maintenance, and facilities activities as needed
Inspect parts by using the engineering drawing(s)
Assumes all other responsibilities as assigned
Required Qualifications
Requires respirator use for up to eight (8) hours a day.
Standing for two (2) consistent hours at a time
Experience with composites, resins, adhesives, coatings, measurement tools, CNC operation, math, forklift
Familiarity with Personal Protective Equipment
Basic understanding of computer programming and CAD/CAM software
Understanding of engineering drawings
High School Diploma
The ability to follow verbal and written procedures, good communication skills
Willingness to learn, ask questions, and listen to others
Keeps quality in mind, attention to detail
Able to work cooperatively on a team
Redwire Defense Tech Benefits
Matching 401(k)
Paid PTO
Paid holidays
Medical, vision, and dental insurance
Group Short-Term & Long-Term Disability
HSA and FSA Options
Critical Care Plan
Accident Care Plan
Clearance Requirements
This position may require access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person's status under the ITAR and the EAR.
Work Environment and Physical Requirements
The work environment may involve a standard office setting while also incorporating elements of a production area. Employees will use standard office equipment, including computers, and must demonstrate stamina to sit or stand while maintaining attention to detail despite potential interruptions. The role may require occasional activities such as walking, climbing, stooping, crouching, and bending. Vision is necessary for reading printed materials and a computer screen, while hearing and speech are essential for effective communication both in person and over the telephone. Additionally, the position may necessitate travel by air or automobile. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment. Employees may be able to lift up to 30 pounds as needed.
Redwire Defense Tech Is An Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Redwire Defense Tech is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources. Continued employment remains on an "At-Will" basis.
CNC Technician
Work Location
San Luis Obispo, CA
FLSA Status
Non-Exempt
Salary Range
The anticipated salary range for this role is $23.00 to $35.00 per hour. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate's qualifications, experience, geographical location, and internal alignment.
Summary
In Composites Fabrication, the CNC Technician performs 3D printing, machining, assembly, balancing, and testing of composites fabrication parts to ensure that JAI production needs are met. A CNC technician with extensive experience may be asked to participate in improving new tooling, parts, and processes.
Responsibilities
The following job functions are a basic requirement but are not limited to and may be assigned other duties.
Receives follow verbal and written instructions to configure and manufacture components
Work on the CNC machines, 3D printers, foam cutting room, Eastman kitting station, and blade balancing room
Operate CNC machinery to fabricate parts
Balance propeller blades for the production team
Prioritize work to consistently meet part demand
Load and unload raw materials and equipment
Set up and calibrate accessories and equipment
Perform necessary maintenance and cleaning of equipment
Supervise machines as they run and adjust as needed
Inspect finished product to ensure it meets required specifications
Report progress and challenges to the fabrication supervisor or CNC operations lead
Assist engineering and other production staff in resolving issues related to equipment and processes as required
Filling out travelers and documenting components' progress through the shop
Ability to comply with safety guidelines
Following all office procedures, including tracking hours and cleaning up workspaces
Support miscellaneous production, design, maintenance, and facilities activities as needed
Inspect parts by using the engineering drawing(s)
Assumes all other responsibilities as assigned
Required Qualifications
Requires respirator use for up to eight (8) hours a day.
Standing for two (2) consistent hours at a time
Experience with composites, resins, adhesives, coatings, measurement tools, CNC operation, math, forklift
Familiarity with Personal Protective Equipment
Basic understanding of computer programming and CAD/CAM software
Understanding of engineering drawings
High School Diploma
The ability to follow verbal and written procedures, good communication skills
Willingness to learn, ask questions, and listen to others
Keeps quality in mind, attention to detail
Able to work cooperatively on a team
Redwire Defense Tech Benefits
Matching 401(k)
Paid PTO
Paid holidays
Medical, vision, and dental insurance
Group Short-Term & Long-Term Disability
HSA and FSA Options
Critical Care Plan
Accident Care Plan
Clearance Requirements
This position may require access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person's status under the ITAR and the EAR.
Work Environment and Physical Requirements
The work environment may involve a standard office setting while also incorporating elements of a production area. Employees will use standard office equipment, including computers, and must demonstrate stamina to sit or stand while maintaining attention to detail despite potential interruptions. The role may require occasional activities such as walking, climbing, stooping, crouching, and bending. Vision is necessary for reading printed materials and a computer screen, while hearing and speech are essential for effective communication both in person and over the telephone. Additionally, the position may necessitate travel by air or automobile. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment. Employees may be able to lift up to 30 pounds as needed.
Redwire Defense Tech Is An Equal Opportunity Employer
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Redwire Defense Tech is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources. Continued employment remains on an "At-Will" basis.