2nd Shift Machinist
Regal Rexnord Corp, Charlotte, NC, United States
Scope of Role
The Machinist is responsible for setting up and operating manual and/or numerically controlled machines to produce a variety of diversified finished parts that meet quality standards.
Essential Duties and Responsibilities
Perform work from standard and complex drawings, instruction sheets, charts and/or verbal instructions. Works to close tolerance as specified.
Set up, run and adjust machine tools and machine equipment to achieve size, finish and tolerance.
Make necessary adjustment to equipment, machine controls, machine tools and fixtures to maintain quality standards in accordance with drawing specifications and/or established Engineering Process (EP).
Properly and safely selects, aligns, secures and removes holding fixture, cutting tools, attachments, accessories, and materials onto machines.
Debug and edit CNC programs to ensure parts meet drawing specifications, in conjunction with Manufacturing Engineering.
Follow established standard work procedures to achieve production requirements and quality standards that meet customer expectations.
Responsible for performing and documenting first and last piece inspection of all parts.
Perform routine daily Total Preventative Maintenance on equipment in assigned cell.
Maintain 6S standard for housekeeping and workplace organization, to include machines, equipment and general work area.
Recommends method changes towards process improvement.
Critical Competencies
Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a 'U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States.
Required skills include, but are not limited to: Turning, gear hobbing, milling, broaching, sawing, honing, grinding and drill and tap.
Demonstrated understanding of CNC controls and G&M code is desired.
Demonstrated knowledge of controlling speeds and feeds on manual machining is desired.
Demonstrated ability to read and understand complex blueprints.
Demonstrated basic GD&T knowledge.
Ability to perform complex mathematical calculations, to include trigonometry.
Proficient use of measurement instruments (e.g. dial calipers, micrometers, optical comparator, height stands, Verniers) to meet tolerance requirements.
Demonstrated critical thinking and problem-solving skills, including a continuous improvement mindset. Exposure to lean manufacturing principles is a plus.
Demonstrated attention to detail and accuracy.
Strong work ethic, including the ability to be self-directed and self-motivated while taking initiative with projects and tasks.
Demonstrated ability to work under pressure and at the necessary pace required to meet customer demand rates and production goals. This includes operating multiple machines in a cell environment.
Strong interpersonal, teamwork, and collaborative skills.
Willingness to be flexible and adapt to changes in internal processes, delays or unexpected events.
Positive attitude with a demonstrated willingness to listen and learn.
Demonstrated safety orientation and compliance mindset.
Demonstrated pattern of reliability and dependability as related to attendance and work assignments.
Basic proficiency with computers, including the ability to accurately enter data.
Proficiency in English language skills, including effective verbal and written communication.
Willingness and ability to work extended hours, including overtime and weekends as required.
Education and Experience Requirements
A High School diploma or GED equivalency is required from an accredited institution.
Certificate and/or AAS in Machining/Manufacturing Technology is desired.
2 or more years of related CNC and/or machining experience is preferred, to include but not limited to: set ups, adjustments, calculations of speeds and feeds, measurements.
Physical Demand and Work Environment:
Physical Demands: Potential physical demands include, but are not limited to: Frequent walking, standing, twisting, carrying and handling; regular bending, stooping and kneeling; regular lifting up to 50 lbs.; occasional climbing, pushing and pulling. Potential sensory demands include but are not limited to: Hearing and seeing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work Environment: Majority of time is spent in a manufacturing production environment with some (but not all) climate‑controlled areas. Personal protective safety equipment must be worn, and proper safety precautions must be observed. Potential exposure may include, but is not limited to: Solvents, dusts, noise, heat, outside weather conditions, cramped spaces, and building construction areas.
Benefits
Medical, Dental, Vision and Prescription Drug Coverage
Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
Paid Time Off and Holidays
401k Retirement Plan with Matching Employer Contributions
Life and Accidental Death & Dismemberment (AD&D) Insurance
Paid Leaves
Tuition Assistance
Equal Employment Opportunity Statement
Regal Rexnord is an Equal Opportunity and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email Recruiting@RegalRexnord.com. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e‑mail Recruiting@RegalRexnord.com.
#J-18808-Ljbffr
The Machinist is responsible for setting up and operating manual and/or numerically controlled machines to produce a variety of diversified finished parts that meet quality standards.
Essential Duties and Responsibilities
Perform work from standard and complex drawings, instruction sheets, charts and/or verbal instructions. Works to close tolerance as specified.
Set up, run and adjust machine tools and machine equipment to achieve size, finish and tolerance.
Make necessary adjustment to equipment, machine controls, machine tools and fixtures to maintain quality standards in accordance with drawing specifications and/or established Engineering Process (EP).
Properly and safely selects, aligns, secures and removes holding fixture, cutting tools, attachments, accessories, and materials onto machines.
Debug and edit CNC programs to ensure parts meet drawing specifications, in conjunction with Manufacturing Engineering.
Follow established standard work procedures to achieve production requirements and quality standards that meet customer expectations.
Responsible for performing and documenting first and last piece inspection of all parts.
Perform routine daily Total Preventative Maintenance on equipment in assigned cell.
Maintain 6S standard for housekeeping and workplace organization, to include machines, equipment and general work area.
Recommends method changes towards process improvement.
Critical Competencies
Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a 'U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States.
Required skills include, but are not limited to: Turning, gear hobbing, milling, broaching, sawing, honing, grinding and drill and tap.
Demonstrated understanding of CNC controls and G&M code is desired.
Demonstrated knowledge of controlling speeds and feeds on manual machining is desired.
Demonstrated ability to read and understand complex blueprints.
Demonstrated basic GD&T knowledge.
Ability to perform complex mathematical calculations, to include trigonometry.
Proficient use of measurement instruments (e.g. dial calipers, micrometers, optical comparator, height stands, Verniers) to meet tolerance requirements.
Demonstrated critical thinking and problem-solving skills, including a continuous improvement mindset. Exposure to lean manufacturing principles is a plus.
Demonstrated attention to detail and accuracy.
Strong work ethic, including the ability to be self-directed and self-motivated while taking initiative with projects and tasks.
Demonstrated ability to work under pressure and at the necessary pace required to meet customer demand rates and production goals. This includes operating multiple machines in a cell environment.
Strong interpersonal, teamwork, and collaborative skills.
Willingness to be flexible and adapt to changes in internal processes, delays or unexpected events.
Positive attitude with a demonstrated willingness to listen and learn.
Demonstrated safety orientation and compliance mindset.
Demonstrated pattern of reliability and dependability as related to attendance and work assignments.
Basic proficiency with computers, including the ability to accurately enter data.
Proficiency in English language skills, including effective verbal and written communication.
Willingness and ability to work extended hours, including overtime and weekends as required.
Education and Experience Requirements
A High School diploma or GED equivalency is required from an accredited institution.
Certificate and/or AAS in Machining/Manufacturing Technology is desired.
2 or more years of related CNC and/or machining experience is preferred, to include but not limited to: set ups, adjustments, calculations of speeds and feeds, measurements.
Physical Demand and Work Environment:
Physical Demands: Potential physical demands include, but are not limited to: Frequent walking, standing, twisting, carrying and handling; regular bending, stooping and kneeling; regular lifting up to 50 lbs.; occasional climbing, pushing and pulling. Potential sensory demands include but are not limited to: Hearing and seeing. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Work Environment: Majority of time is spent in a manufacturing production environment with some (but not all) climate‑controlled areas. Personal protective safety equipment must be worn, and proper safety precautions must be observed. Potential exposure may include, but is not limited to: Solvents, dusts, noise, heat, outside weather conditions, cramped spaces, and building construction areas.
Benefits
Medical, Dental, Vision and Prescription Drug Coverage
Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
Paid Time Off and Holidays
401k Retirement Plan with Matching Employer Contributions
Life and Accidental Death & Dismemberment (AD&D) Insurance
Paid Leaves
Tuition Assistance
Equal Employment Opportunity Statement
Regal Rexnord is an Equal Opportunity and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email Recruiting@RegalRexnord.com. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e‑mail Recruiting@RegalRexnord.com.
#J-18808-Ljbffr