Machinist III
Eaton, Irvine, CA, United States
Eaton’s IS AER FMC division is currently seeking a Machinist III.
The hourly rate for this position is $34.00 per hour. The hours for this shift are 5:30 am - 2:00 pm.
This position is also eligible for a variable incentive program.
Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
What You’ll Do
Eaton’s Aerospace Group is currently recruiting for a Machinist III to set‑up, adjust and operate a variety of machine tools such as engine lathes, mills, CNC machines, CNC lathes, drill presses and deburr experience.
Perform operations such as drilling, tapping, reaming, and boring on a variety of work requiring a degree of skill while ensuring dimensional accuracy is maintained
Create setups and operate CNC machine to a specific program as per part number and work instruction sheet via utilization of DNC (direct numerical control) link on computer
Work from drawings and specifications using a variety of precision measuring instruments
Read and interoperate engineering drawings and have an understanding of Geometric Tolerance
Work under general supervision; work is subject to progress and final inspection
Inspect work after completed as well as complete all appropriate inspection paperwork
Skilled on both lathes and Mill/Turn 5-Axis
Rotate to various types of machines in order to be competent in their operation
Perform Lean Initiatives including Continuous Improvement
The employee may be required to work beyond normal working hours from time to time as the workload dictates
Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.
Perform other related duties as assigned
Qualifications
Basic (Required) Qualifications
High School Diploma or GED from an accredited institution
A minimum five (5) years’ previous work experience as a Machinist
Must have Lathe experience 2-3 axis (Mazak experience preferred.)
No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Irvine will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation.
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
No relocation benefit is offered for this position. Only candidates residing within the immediate area of Irvine, CA (50 miles) will be considered for this position.
This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Preferred Qualifications
Previous work experience in the Aerospace Industry
Milling 4 Axis Experience
Mazak machining experience
Equal Employment Opportunity Statement
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as retirement benefits, and several programs that provide for paid and unpaid time away from work. Specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
#J-18808-Ljbffr
The hourly rate for this position is $34.00 per hour. The hours for this shift are 5:30 am - 2:00 pm.
This position is also eligible for a variable incentive program.
Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
What You’ll Do
Eaton’s Aerospace Group is currently recruiting for a Machinist III to set‑up, adjust and operate a variety of machine tools such as engine lathes, mills, CNC machines, CNC lathes, drill presses and deburr experience.
Perform operations such as drilling, tapping, reaming, and boring on a variety of work requiring a degree of skill while ensuring dimensional accuracy is maintained
Create setups and operate CNC machine to a specific program as per part number and work instruction sheet via utilization of DNC (direct numerical control) link on computer
Work from drawings and specifications using a variety of precision measuring instruments
Read and interoperate engineering drawings and have an understanding of Geometric Tolerance
Work under general supervision; work is subject to progress and final inspection
Inspect work after completed as well as complete all appropriate inspection paperwork
Skilled on both lathes and Mill/Turn 5-Axis
Rotate to various types of machines in order to be competent in their operation
Perform Lean Initiatives including Continuous Improvement
The employee may be required to work beyond normal working hours from time to time as the workload dictates
Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards.
Perform other related duties as assigned
Qualifications
Basic (Required) Qualifications
High School Diploma or GED from an accredited institution
A minimum five (5) years’ previous work experience as a Machinist
Must have Lathe experience 2-3 axis (Mazak experience preferred.)
No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Irvine will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation.
Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
No relocation benefit is offered for this position. Only candidates residing within the immediate area of Irvine, CA (50 miles) will be considered for this position.
This position requires access to export-controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must be a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (green card holder), (iii) refugee under 8 U.S.C. 1157, or (iv) asylee under 8 U.S.C. 1158.
Preferred Qualifications
Previous work experience in the Aerospace Industry
Milling 4 Axis Experience
Mazak machining experience
Equal Employment Opportunity Statement
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.
We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as retirement benefits, and several programs that provide for paid and unpaid time away from work. Specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
#J-18808-Ljbffr