Quality Technician 3rd Shift
STOW Group, Adairsville, GA, United States
Overview
The Quality Technician is responsible for improving awareness of Quality, Environment, and Safety (QSE) among all employees across the different production departments. The role supports the development of the Q&E system and ensures compliance with agreements, standards, and procedures at all levels and workstations.
Key Deliverables
Motivate and ensure that all employees work safely and in accordance with stow QSHE standards.
Ensure that all work is carried out in a safe, efficient, and quality-focused manner.
Promote a Lean mindset and continuous improvement.
Ensure that all activities and processes comply with QSHE standards, policies, work instructions, and local legislation.
Daily Responsibilities
Quality control at each workstation (hanging/unhanging) per team and record it.
Check the baths (degreasing/rinsing/KOH/titration) and make corrections if needed.
Check S&M packages – 'Quality Control.'
Water half-test: smooth lines (adhesion). Mill parts for tensile testing (mother coil or slit coil).
Check waste carts (properly sorted).
Production control of NSTs (validation).
Report (send to colleague and the Quality Department Manager).
Weekly Responsibilities
Check wastewater discharge.
Clean the wastewater venturi.
Inventory of the Q-zone compared with SAP.
Calibrate smooth line measuring benches.
Check weekend production.
Verify the quality of finished products: warehouse and outside storage.
'Scrap & rework' meeting.
From each smooth line, place 1 sample in the salt spray test.
Monthly Responsibilities
Calibrate coating inspection devices ('Elco').
Check powder expiration dates.
Record an oven temperature curve: each line.
Over one week, check 2 trailers per team for correct loading.
Check intermediate materials such as powders, coils, etc.
Perform powder analyses (gloss / crosscut / MEK).
Check supplier reference plates.
Production Control
Carry out in-depth internal audits according to a fixed audit plan.
Perform internal audits of workstations.
Negotiate and coordinate with the relevant departments and managers.
Follow up on corrective actions.
Monitoring controls in case of non-conformities.
Perform load tests.
Draft an internal complaint in case of non-conformities / NCRs.
In case of non-conformities, pass on the necessary information to the Quality Administrator.
Measurement equipment inventory and calibration
Prepare an inventory of measuring tools: calibration.
Assist with calibrations carried out by external companies: collect measuring devices, evaluate and communicate results, follow up on actions.
Safety
Follow general safety instructions.
Wearing and using PPE is mandatory (work clothing, high-visibility vest and/or jacket, safety shoes, safety knife).
Report hazardous situations.
Order and cleanliness
Keep the quality office and the Q-Zone tidy and clean.
Dispose of waste in the appropriate waste containers.
Qualifications
Knowledge of quality control processes and inspection methods.
Ability to read and interpret quality standards and procedures.
Basic understanding of chemical processes and coatings (preferred).
Analytical and reporting skills.
Attention to detail and problem-solving mindset.
Good communication and teamwork skills.
Physical Work Conditions
The Quality Technician is required to work in an industrial manufacturing environment for the duration of their shift. This role involves prolonged periods of standing, walking, bending, and reaching. The employee must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds, with or without reasonable accommodation. The position requires working in a loud environment where hearing protection may be necessary. The Quality Technician will also be exposed to varying temperatures, including heat and cold, as the facility is not climate controlled. Environmental conditions may fluctuate based on weather, machinery operation, and production demands. The employee must be able to safely navigate the production floor, work near moving equipment, and maintain focus and accuracy while performing quality inspections and coaching activities under these conditions.
Benefits
PTO, sick leave, 11 US paid holidays
Medical (currently BlueCross BlueShield), Dental and Vision Insurance, including Family coverage, all currently 90% Company paid
Company paid Short- and Long-Term Disability Insurance
Company Paid Life Insurance
Company Paid Accidental Death & Dismemberment
401K with employer match, currently 4%
Partial Tuition Reimbursement after 12 months
Gross Salary
EEO
Movu US provides equal employment opportunities to all employees and applicants for employment. stow prohibits discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
#J-18808-Ljbffr
The Quality Technician is responsible for improving awareness of Quality, Environment, and Safety (QSE) among all employees across the different production departments. The role supports the development of the Q&E system and ensures compliance with agreements, standards, and procedures at all levels and workstations.
Key Deliverables
Motivate and ensure that all employees work safely and in accordance with stow QSHE standards.
Ensure that all work is carried out in a safe, efficient, and quality-focused manner.
Promote a Lean mindset and continuous improvement.
Ensure that all activities and processes comply with QSHE standards, policies, work instructions, and local legislation.
Daily Responsibilities
Quality control at each workstation (hanging/unhanging) per team and record it.
Check the baths (degreasing/rinsing/KOH/titration) and make corrections if needed.
Check S&M packages – 'Quality Control.'
Water half-test: smooth lines (adhesion). Mill parts for tensile testing (mother coil or slit coil).
Check waste carts (properly sorted).
Production control of NSTs (validation).
Report (send to colleague and the Quality Department Manager).
Weekly Responsibilities
Check wastewater discharge.
Clean the wastewater venturi.
Inventory of the Q-zone compared with SAP.
Calibrate smooth line measuring benches.
Check weekend production.
Verify the quality of finished products: warehouse and outside storage.
'Scrap & rework' meeting.
From each smooth line, place 1 sample in the salt spray test.
Monthly Responsibilities
Calibrate coating inspection devices ('Elco').
Check powder expiration dates.
Record an oven temperature curve: each line.
Over one week, check 2 trailers per team for correct loading.
Check intermediate materials such as powders, coils, etc.
Perform powder analyses (gloss / crosscut / MEK).
Check supplier reference plates.
Production Control
Carry out in-depth internal audits according to a fixed audit plan.
Perform internal audits of workstations.
Negotiate and coordinate with the relevant departments and managers.
Follow up on corrective actions.
Monitoring controls in case of non-conformities.
Perform load tests.
Draft an internal complaint in case of non-conformities / NCRs.
In case of non-conformities, pass on the necessary information to the Quality Administrator.
Measurement equipment inventory and calibration
Prepare an inventory of measuring tools: calibration.
Assist with calibrations carried out by external companies: collect measuring devices, evaluate and communicate results, follow up on actions.
Safety
Follow general safety instructions.
Wearing and using PPE is mandatory (work clothing, high-visibility vest and/or jacket, safety shoes, safety knife).
Report hazardous situations.
Order and cleanliness
Keep the quality office and the Q-Zone tidy and clean.
Dispose of waste in the appropriate waste containers.
Qualifications
Knowledge of quality control processes and inspection methods.
Ability to read and interpret quality standards and procedures.
Basic understanding of chemical processes and coatings (preferred).
Analytical and reporting skills.
Attention to detail and problem-solving mindset.
Good communication and teamwork skills.
Physical Work Conditions
The Quality Technician is required to work in an industrial manufacturing environment for the duration of their shift. This role involves prolonged periods of standing, walking, bending, and reaching. The employee must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds, with or without reasonable accommodation. The position requires working in a loud environment where hearing protection may be necessary. The Quality Technician will also be exposed to varying temperatures, including heat and cold, as the facility is not climate controlled. Environmental conditions may fluctuate based on weather, machinery operation, and production demands. The employee must be able to safely navigate the production floor, work near moving equipment, and maintain focus and accuracy while performing quality inspections and coaching activities under these conditions.
Benefits
PTO, sick leave, 11 US paid holidays
Medical (currently BlueCross BlueShield), Dental and Vision Insurance, including Family coverage, all currently 90% Company paid
Company paid Short- and Long-Term Disability Insurance
Company Paid Life Insurance
Company Paid Accidental Death & Dismemberment
401K with employer match, currently 4%
Partial Tuition Reimbursement after 12 months
Gross Salary
EEO
Movu US provides equal employment opportunities to all employees and applicants for employment. stow prohibits discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.
This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
#J-18808-Ljbffr