Pump Mechanic
ITT Inc., Stafford, TX, United States
Position Summary
We are seeking a
Pump Mechanic/Inspector
to support our aftermarket repair and upgrade business in our Houston PRO Services shop located in Stafford, TX. Building on centuries of pump design experience, PRO Services provides an array of services focusing on reducing equipment total cost of ownership and increasing plant output, including condition monitoring, predictive maintenance contracts, field service, engineered upgrades, inventory management, and overhauls for pumps and other rotating equipment.
Essential Responsibilities
Perform complete disassembly and reassembly of centrifugal pumps, including multistage and high‑energy units.
Conduct detailed dimensional inspections of critical components (shafts, impellers, sleeves, bearings, wear rings, casings) using precision measuring instruments.
Evaluate component condition and determine repair vs. replace decisions based on OEM specifications, tolerances, and operational requirements.
Troubleshoot mechanical issues independently and recommend effective repair solutions.
Develop detailed work scopes based on inspection findings, OEM specifications, and failure analysis, including material and repair recommendations.
Provide work scope and material requirements aligned with customer specifications and internal quality standards.
Measure, calculate, and set critical running clearances and tolerances (axial and radial) in accordance with OEM standards.
Perform precision assembly techniques, including proper torquing, interference fits, and use of heating/cooling methods where required.
Review and verify all running clearances prior to final assembly to ensure proper equipment performance.
Conduct final inspection of all machined parts (repaired or newly manufactured) to ensure accuracy, completeness, and compliance with specifications.
Perform final inspection of assembled equipment, record inspection data, and coordinate completion of documentation prior to shipment.
Safely perform and lead air and hydrostatic testing of equipment; interpret results and troubleshoot any issues identified during testing.
Ensure accuracy and completeness of all inspection sheets, drawings, and related documentation.
Report defects in materials, rework, missed inspections, job delays, and problem areas to applicable internal and external customers.
Mentor and provide technical guidance to lower‑level mechanics in disassembly, inspection, troubleshooting, and assembly practices.
Perform additional duties and support projects as required to meet business needs.
Position Requirements
Knowledge & Skills
Excellent communication and interpersonal skills to interact effectively with diverse client group.
Ability to troubleshoot in-depth issues with rotating equipment.
Ability to read, analyze, and interpret pump drawings.
Ability to anticipate and solve practical problems and resolve issues.
Self‑starter with the ability to work both independently and within a team.
Ability to effectively communicate ideas and properly describe problems and solutions.
Ability to work overtime hours, including weekends and holidays, as needed by customer demands and/or business needs.
Customer service mindset to ensure on‑time delivery and quality workmanship.
Ability to effectively handle multiple tasks, time management, and prioritization skills.
Well‑developed planning, organization, analytical, and decision‑making skills.
Ability to produce clear, timely, and concise documentation and have well‑developed problem‑solving skills.
Ability to apply good judgment, strong work ethic, and integrity on the job.
Proficient in relevant PC skills.
Strong drive to make things happen and a strong 'can do' attitude.
Knowledge of service environment activities including DCI, machining, assembly, test, and field service for rotating equipment.
Understand different materials and their properties.
Ability to work efficiently within the fixed time window for each manufacturing process.
Willingness to work on teams and engage in ongoing Continuous Improvements within facility.
Experience
10+ years of troubleshooting and repairing rotating equipment.
Experience in reading blueprints including GT&T.
Experience operating lifting devices, including cranes and forklifts.
Education
High School Diploma or GED Equivalent.
Vocational/Technical Degree preferred.
Work Environment
The role requires frequent standing, walking, sitting, and use of hands and arms. The employee must occasionally lift and/or move up to 50 pounds. The work environment is normally noisy and involves machine repair tasks. The employee must wear personal protective equipment as required by PPE assessment and the noise level is typical of a machine repair shop environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Equal Pay Act Statement
We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based on both what they accomplish and how they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short- and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. The salary offered to a candidate is based on factors such as candidate experience and qualifications, location, as well as market and business considerations.
Equal Pay Act Range
Between $30.91 and $46.20
#J-18808-Ljbffr
We are seeking a
Pump Mechanic/Inspector
to support our aftermarket repair and upgrade business in our Houston PRO Services shop located in Stafford, TX. Building on centuries of pump design experience, PRO Services provides an array of services focusing on reducing equipment total cost of ownership and increasing plant output, including condition monitoring, predictive maintenance contracts, field service, engineered upgrades, inventory management, and overhauls for pumps and other rotating equipment.
Essential Responsibilities
Perform complete disassembly and reassembly of centrifugal pumps, including multistage and high‑energy units.
Conduct detailed dimensional inspections of critical components (shafts, impellers, sleeves, bearings, wear rings, casings) using precision measuring instruments.
Evaluate component condition and determine repair vs. replace decisions based on OEM specifications, tolerances, and operational requirements.
Troubleshoot mechanical issues independently and recommend effective repair solutions.
Develop detailed work scopes based on inspection findings, OEM specifications, and failure analysis, including material and repair recommendations.
Provide work scope and material requirements aligned with customer specifications and internal quality standards.
Measure, calculate, and set critical running clearances and tolerances (axial and radial) in accordance with OEM standards.
Perform precision assembly techniques, including proper torquing, interference fits, and use of heating/cooling methods where required.
Review and verify all running clearances prior to final assembly to ensure proper equipment performance.
Conduct final inspection of all machined parts (repaired or newly manufactured) to ensure accuracy, completeness, and compliance with specifications.
Perform final inspection of assembled equipment, record inspection data, and coordinate completion of documentation prior to shipment.
Safely perform and lead air and hydrostatic testing of equipment; interpret results and troubleshoot any issues identified during testing.
Ensure accuracy and completeness of all inspection sheets, drawings, and related documentation.
Report defects in materials, rework, missed inspections, job delays, and problem areas to applicable internal and external customers.
Mentor and provide technical guidance to lower‑level mechanics in disassembly, inspection, troubleshooting, and assembly practices.
Perform additional duties and support projects as required to meet business needs.
Position Requirements
Knowledge & Skills
Excellent communication and interpersonal skills to interact effectively with diverse client group.
Ability to troubleshoot in-depth issues with rotating equipment.
Ability to read, analyze, and interpret pump drawings.
Ability to anticipate and solve practical problems and resolve issues.
Self‑starter with the ability to work both independently and within a team.
Ability to effectively communicate ideas and properly describe problems and solutions.
Ability to work overtime hours, including weekends and holidays, as needed by customer demands and/or business needs.
Customer service mindset to ensure on‑time delivery and quality workmanship.
Ability to effectively handle multiple tasks, time management, and prioritization skills.
Well‑developed planning, organization, analytical, and decision‑making skills.
Ability to produce clear, timely, and concise documentation and have well‑developed problem‑solving skills.
Ability to apply good judgment, strong work ethic, and integrity on the job.
Proficient in relevant PC skills.
Strong drive to make things happen and a strong 'can do' attitude.
Knowledge of service environment activities including DCI, machining, assembly, test, and field service for rotating equipment.
Understand different materials and their properties.
Ability to work efficiently within the fixed time window for each manufacturing process.
Willingness to work on teams and engage in ongoing Continuous Improvements within facility.
Experience
10+ years of troubleshooting and repairing rotating equipment.
Experience in reading blueprints including GT&T.
Experience operating lifting devices, including cranes and forklifts.
Education
High School Diploma or GED Equivalent.
Vocational/Technical Degree preferred.
Work Environment
The role requires frequent standing, walking, sitting, and use of hands and arms. The employee must occasionally lift and/or move up to 50 pounds. The work environment is normally noisy and involves machine repair tasks. The employee must wear personal protective equipment as required by PPE assessment and the noise level is typical of a machine repair shop environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Equal Pay Act Statement
We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based on both what they accomplish and how they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short- and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. The salary offered to a candidate is based on factors such as candidate experience and qualifications, location, as well as market and business considerations.
Equal Pay Act Range
Between $30.91 and $46.20
#J-18808-Ljbffr