Maintenance Technician in Buford
Energy Jobline ZR, Buford, GA, United States
Industrial Maintenance Technician
Hire type: Full-Time
Shift: 7:00 PM - 7:00 AM
Pay Range: $25 - $29/hr
Company: DOMO Engineering Plastics US, LLC is looking to hire an Industrial Maintenance Technician for our PM Continental Shift with rotating days each week.
Summary of Responsibilities
Understands and adheres to all DOMO Company policies and procedures.
Possesses ability to complete preventive and predictive maintenance and repairs of all manufacturing equipment, including the fabrication and mechanical scope of repairs.
Demonstrates ability to read and understand mechanical and electrical prints for working systems, to dismantle, repair, and re-assemble gear boxes, extruders, fans, belt conveyors, blowers, compressors, pumps, valves, drives and all mechanical equipment.
Is knowledgeable in failure modes of asset classes, responding to breakdown trouble calls and bringing machines to their proper running state, including troubleshooting, diagnosing and fixing problems.
Is proficient in the use of IR and Ultrasound (vacuum, flow, leaks, obstructions, etc.) technologies for PdM applications.
Demonstrates ability to provide limited electrical support: 208/480V devices including but not limited to, motor starters, VFDs, PLCs, pumps, conveyor motors, transformers, etc.
Utilizes CMMS for work orders, purchases, capital projects, PM and parts.
Ensures the maintenance and common areas are organized and clean in preparation for the next shift (sweeping, cleaning, wipe-downs, garbage, etc.).
Meets priorities and targets per work shift.
Plays an active role in contractor assigned duties, helping in the scope of work to be done in mechanical areas.
Participates in special projects and performs other duties as assigned.
Minimum Qualifications
Must have at least 5 years of experience in an industrial or manufacturing environment.
Must have experience in CMMS & TPM, VFD installation, programming, welding, PLC troubleshooting, PLC ladder diagram interpretation, 208/480V motor and drive replacement/set-up, mechanical drives, extrusion/compounding/injection molding equipment.
Must be able to operate a variety of hand and power tools, measuring devices, and test equipment.
Must be 18 years or older and have High School Diploma or equivalent.
Must be prepared to work mandatory weekend overtime when required and/or rotating "on-call".
Must meet physical requirements which includes the ability to lift up to 70lbs.
Must understand basic math.
Must be able to read and write (English) at a level to comprehend and apply information contained in detailed and complex technical manuals, procedural manuals, blueprints, etc., without assistance.
Able to work with minimal supervision in team environment.
Must have good communication skills and the assertiveness to keep on top of documentation requirements.
Must be dependable and have a good attendance record.
Handle difficult situations effectively and able to resolve conflicts and problems.
Flexibility, the willingness to look beyond the job description and assist in doing what must be done in a growing company.
Proficiency
Machine Setups for Production Runs
PLC Troubleshooting Skills
Creating Preventive Maintenance Plans
Electrical Schematics
Electrical Troubleshooting Skills
Mechanical Troubleshooting Skills
Pneumatics Experience
Hydraulics Experience
Troubleshooting Industrial Automation Equipment
Lean Manufacturing Principles
Forklift Licensed
Machine Safety Inspections
Troubleshooting CNC Machines
IT Infrastructure Hardware Experience
Machines & Technologies You'll Use
Calipers and Micrometers
MIG Welder
TIG Welder
Stick Welder
Injection Molding Machine
Manual Grinder
Variable Frequency Drives (VFD)
Flux‑Cored Arc Welder
Extrusion Machine
ERP Software
Overhead Crane
Blow Molding Machine
Manual Plasma Cutter
Programmable Logic Controller (PLC) (Allen Bradley, Siemens)
HMI
Conveyor Systems
Forklifts
EEO Statement
DOMO is an Equal Opportunity Employer. DOMO will provide reasonable accommodation for qualified applicants and employees with disabilities unless doing so would cause undue hardship.
This job description in no way states or implies that these are the only duties to be performed by the associate occupying this position. Associates will be required to follow any other job‑related instructions and to perform other job‑related duties requested by their supervisor in compliance with Federal and State Laws. The duties and responsibilities listed are for information only and are not exhaustive. Requirements are representative of minimum levels of knowledge, skills and/or abilities. Continued employment remains on an "at‑will" basis.
#J-18808-Ljbffr
Hire type: Full-Time
Shift: 7:00 PM - 7:00 AM
Pay Range: $25 - $29/hr
Company: DOMO Engineering Plastics US, LLC is looking to hire an Industrial Maintenance Technician for our PM Continental Shift with rotating days each week.
Summary of Responsibilities
Understands and adheres to all DOMO Company policies and procedures.
Possesses ability to complete preventive and predictive maintenance and repairs of all manufacturing equipment, including the fabrication and mechanical scope of repairs.
Demonstrates ability to read and understand mechanical and electrical prints for working systems, to dismantle, repair, and re-assemble gear boxes, extruders, fans, belt conveyors, blowers, compressors, pumps, valves, drives and all mechanical equipment.
Is knowledgeable in failure modes of asset classes, responding to breakdown trouble calls and bringing machines to their proper running state, including troubleshooting, diagnosing and fixing problems.
Is proficient in the use of IR and Ultrasound (vacuum, flow, leaks, obstructions, etc.) technologies for PdM applications.
Demonstrates ability to provide limited electrical support: 208/480V devices including but not limited to, motor starters, VFDs, PLCs, pumps, conveyor motors, transformers, etc.
Utilizes CMMS for work orders, purchases, capital projects, PM and parts.
Ensures the maintenance and common areas are organized and clean in preparation for the next shift (sweeping, cleaning, wipe-downs, garbage, etc.).
Meets priorities and targets per work shift.
Plays an active role in contractor assigned duties, helping in the scope of work to be done in mechanical areas.
Participates in special projects and performs other duties as assigned.
Minimum Qualifications
Must have at least 5 years of experience in an industrial or manufacturing environment.
Must have experience in CMMS & TPM, VFD installation, programming, welding, PLC troubleshooting, PLC ladder diagram interpretation, 208/480V motor and drive replacement/set-up, mechanical drives, extrusion/compounding/injection molding equipment.
Must be able to operate a variety of hand and power tools, measuring devices, and test equipment.
Must be 18 years or older and have High School Diploma or equivalent.
Must be prepared to work mandatory weekend overtime when required and/or rotating "on-call".
Must meet physical requirements which includes the ability to lift up to 70lbs.
Must understand basic math.
Must be able to read and write (English) at a level to comprehend and apply information contained in detailed and complex technical manuals, procedural manuals, blueprints, etc., without assistance.
Able to work with minimal supervision in team environment.
Must have good communication skills and the assertiveness to keep on top of documentation requirements.
Must be dependable and have a good attendance record.
Handle difficult situations effectively and able to resolve conflicts and problems.
Flexibility, the willingness to look beyond the job description and assist in doing what must be done in a growing company.
Proficiency
Machine Setups for Production Runs
PLC Troubleshooting Skills
Creating Preventive Maintenance Plans
Electrical Schematics
Electrical Troubleshooting Skills
Mechanical Troubleshooting Skills
Pneumatics Experience
Hydraulics Experience
Troubleshooting Industrial Automation Equipment
Lean Manufacturing Principles
Forklift Licensed
Machine Safety Inspections
Troubleshooting CNC Machines
IT Infrastructure Hardware Experience
Machines & Technologies You'll Use
Calipers and Micrometers
MIG Welder
TIG Welder
Stick Welder
Injection Molding Machine
Manual Grinder
Variable Frequency Drives (VFD)
Flux‑Cored Arc Welder
Extrusion Machine
ERP Software
Overhead Crane
Blow Molding Machine
Manual Plasma Cutter
Programmable Logic Controller (PLC) (Allen Bradley, Siemens)
HMI
Conveyor Systems
Forklifts
EEO Statement
DOMO is an Equal Opportunity Employer. DOMO will provide reasonable accommodation for qualified applicants and employees with disabilities unless doing so would cause undue hardship.
This job description in no way states or implies that these are the only duties to be performed by the associate occupying this position. Associates will be required to follow any other job‑related instructions and to perform other job‑related duties requested by their supervisor in compliance with Federal and State Laws. The duties and responsibilities listed are for information only and are not exhaustive. Requirements are representative of minimum levels of knowledge, skills and/or abilities. Continued employment remains on an "at‑will" basis.
#J-18808-Ljbffr