Tech 1 Quality MSD
Patterson-UTI, Conroe, TX, United States
Brief Description
The Quality Tech I will be responsible for inspection of machined parts for MS Directional machine shop, repair & maintenance, quality control, and engineering departments. The Quality Tech I will then issue the inspection report and supporting quality notice and/or reports if applicable. This will include identifying non-conformities and Quality Notices. Reporting to the Quality Control Department, this role must be passionate about quality assurance of all duties performed.
The Quality Tech I works under the direction of the Quality Manager.
Detailed Description
Inspect incoming parts and tools for damage or defects
Measure parts using basic tools such as calipers, micrometers, and tape measures
Follow inspection checklists and work instructions step by step
Quality control of parts to determine whether they need to be repaired or replaced
List parts to be replaced referring to the manufacturer's manuals and diagrams
Operates devices to comply with test requirements and to perform data acquisition and analysis using testing equipment including but not limited to micrometers, calipers, etc.
Document inspections, test results, repair work done and parts replaced for proper billing and record upkeep
Ensure the yard and shop spaces are clean and organized
Ensure that all equipment is clean and in good working order
Safely operate forklift to move equipment around the yard
Participate in all required meetings, training and development activities
Ability to communicate, including ability to read, write, and speak English and to promptly follow verbal and written directions in English.
Performs other related duties as assigned with supervision when needed
Assist in basic troubleshooting with guidance from experienced technicians
Job Requirements
Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools
Ability to safely navigate the yard and shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day
ight, outdoor hot/cold weather)
Ability to operate heavy equipment
Lift and carry 50 pounds independently while walking on uneven surfaces
Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas
Demonstrate clear written and verbal communication skills including ability to promptly give, and follow, directions when working with others and ability to interact productively with coworkers and third parties
Basic computer skills in Microsoft Office
Wear Personal Protective Equipment (PPE) at all designated times
Willing to be on call after hours, work extended schedules, including extra days, occasional nights, weekends and holidays.
Minimum Qualifications
High school diploma or GED equivalent
6+ months of stable related work history
Preferred Qualifications
Quality control experience with vector gauges and RA meter and other measurement equipment
Knowledge of API and TH Hill industry standards
Certified Mechanical Inspector, Continuous Quality Improvement, and Six Sigma Green Belt Certification
Ability to work independently while adhering to expected deadline schedules
Additional Details
The QA/QC -Technician must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop and yard which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.
#J-18808-Ljbffr
The Quality Tech I will be responsible for inspection of machined parts for MS Directional machine shop, repair & maintenance, quality control, and engineering departments. The Quality Tech I will then issue the inspection report and supporting quality notice and/or reports if applicable. This will include identifying non-conformities and Quality Notices. Reporting to the Quality Control Department, this role must be passionate about quality assurance of all duties performed.
The Quality Tech I works under the direction of the Quality Manager.
Detailed Description
Inspect incoming parts and tools for damage or defects
Measure parts using basic tools such as calipers, micrometers, and tape measures
Follow inspection checklists and work instructions step by step
Quality control of parts to determine whether they need to be repaired or replaced
List parts to be replaced referring to the manufacturer's manuals and diagrams
Operates devices to comply with test requirements and to perform data acquisition and analysis using testing equipment including but not limited to micrometers, calipers, etc.
Document inspections, test results, repair work done and parts replaced for proper billing and record upkeep
Ensure the yard and shop spaces are clean and organized
Ensure that all equipment is clean and in good working order
Safely operate forklift to move equipment around the yard
Participate in all required meetings, training and development activities
Ability to communicate, including ability to read, write, and speak English and to promptly follow verbal and written directions in English.
Performs other related duties as assigned with supervision when needed
Assist in basic troubleshooting with guidance from experienced technicians
Job Requirements
Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools
Ability to safely navigate the yard and shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day
ight, outdoor hot/cold weather)
Ability to operate heavy equipment
Lift and carry 50 pounds independently while walking on uneven surfaces
Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas
Demonstrate clear written and verbal communication skills including ability to promptly give, and follow, directions when working with others and ability to interact productively with coworkers and third parties
Basic computer skills in Microsoft Office
Wear Personal Protective Equipment (PPE) at all designated times
Willing to be on call after hours, work extended schedules, including extra days, occasional nights, weekends and holidays.
Minimum Qualifications
High school diploma or GED equivalent
6+ months of stable related work history
Preferred Qualifications
Quality control experience with vector gauges and RA meter and other measurement equipment
Knowledge of API and TH Hill industry standards
Certified Mechanical Inspector, Continuous Quality Improvement, and Six Sigma Green Belt Certification
Ability to work independently while adhering to expected deadline schedules
Additional Details
The QA/QC -Technician must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop and yard which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.
#J-18808-Ljbffr