Sr CNC Machinist - Night Shift - Conroe, TX
Patterson-UTI, Conroe, TX, United States
Job Title: SeniorMachinist | Sr. CNC Lathe Operator
Location: Conroe, Texas
Brief Description
The Sr. Machinist will oversee work on a CNC lathe which ensures cutting a variety of mud motor parts. All machinists should ensure each part of all measurements are accurate and that all parts are usable after cutting. This role is also responsible for visual inspection of all parts upon completion and QA/QC of all parts before being taken out of lathe. The Sr. Machinist role will report directly to the Machine Shop Supervisor (Production Foreman).
Detailed Description
Oversee inspection of all parts produced or machined
Repair all equipment brought to the machine shop
Provide effective QA/QC procedures during production
Ability to work independently in troubleshooting and resolving problems concerning machining operations
Perform secondary machining operations on components parts as required
Perform detailed analysis of the component parts configuration/dimensions to determine efficiency in machining operations required for production
Assess worn parts to determine whether they need to be repaired or replaced
Work with engineering and fellow supervisory personnel to troubleshoot and resolve design equipment and work through operating difficulties
Perform preventive maintenance duties as scheduled by the maintenance department
Provide training of lower-level machinist, answering work questions, resolving operating difficulties and reviewing completed work assignments
Document inspections, test results, repair work done
Oversee cleanliness and organization of the shop
Ensure that all equipment is clean and in good working order
Safely operate forklift to move equipment around the yard
Load machine with workpieces or raw materials
Strong familiarity with CA MZA2 D drawings and geometric dimensioning testing
Performs other related duties as assigned
Job Requirements
Solid experience using various measuring equipment
Ability to accurately indicate and dial in a 4-jaw chuck
Ability to operate an overhead crane
Clear vision to judge near and far distances to maintain awareness of reporting ongoing work activities to coworkers and third party
Maintain spatial orientation and awareness to safely move around work environment with many moving objects
Knowledge and experience with tools and materials
Broad knowledge of machining techniques to perform advanced setup operations
Proficient in the use of cutting tools & measuring equipment
Ability to read and understand blueprint drawings
Ability to work independently to troubleshoot and resolve problems concerning machining operations and tools
Ability to lead by example and be a good mentor to junior employees
Demonstrate clear written and verbal communication skills, including ability to promptly give and follow directions when working with others
Ability to handle multiple projects and supervisors at once
Must have good interpersonal and communication skills including ability to interact productively with coworkers and third parties
Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools
Ability to safely navigate the shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day
ight, outdoor hot/cold weather)
Lift and carry 50 pounds independently while potentially walking on uneven surfaces
Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas
Listen for unusual noises that signify equipment and machinery problems
Stay alert and focused up including occasional extended work periods
Must be willing and able to be on call after hours and work on weekends
Wear Personal Protective Equipment (PPE) at all designated times
Good computer skills and proficiency in Microsoft Office
Minimum Qualifications
High school diploma or GED equivalent
5+ years of experience running a CNC lathe
Must live within a 1 hour driving distance of the shop
Availability to work on call rotation as well as overtime
Experience machining (new and repair) API connections and or tapered connections
Preferred Qualifications
Experience with Mazak control
Experience training junior machinists
Additional Details
The Sr. Machinist must work with an emphasis on safety for themselves and others, including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.
#J-18808-Ljbffr
Location: Conroe, Texas
Brief Description
The Sr. Machinist will oversee work on a CNC lathe which ensures cutting a variety of mud motor parts. All machinists should ensure each part of all measurements are accurate and that all parts are usable after cutting. This role is also responsible for visual inspection of all parts upon completion and QA/QC of all parts before being taken out of lathe. The Sr. Machinist role will report directly to the Machine Shop Supervisor (Production Foreman).
Detailed Description
Oversee inspection of all parts produced or machined
Repair all equipment brought to the machine shop
Provide effective QA/QC procedures during production
Ability to work independently in troubleshooting and resolving problems concerning machining operations
Perform secondary machining operations on components parts as required
Perform detailed analysis of the component parts configuration/dimensions to determine efficiency in machining operations required for production
Assess worn parts to determine whether they need to be repaired or replaced
Work with engineering and fellow supervisory personnel to troubleshoot and resolve design equipment and work through operating difficulties
Perform preventive maintenance duties as scheduled by the maintenance department
Provide training of lower-level machinist, answering work questions, resolving operating difficulties and reviewing completed work assignments
Document inspections, test results, repair work done
Oversee cleanliness and organization of the shop
Ensure that all equipment is clean and in good working order
Safely operate forklift to move equipment around the yard
Load machine with workpieces or raw materials
Strong familiarity with CA MZA2 D drawings and geometric dimensioning testing
Performs other related duties as assigned
Job Requirements
Solid experience using various measuring equipment
Ability to accurately indicate and dial in a 4-jaw chuck
Ability to operate an overhead crane
Clear vision to judge near and far distances to maintain awareness of reporting ongoing work activities to coworkers and third party
Maintain spatial orientation and awareness to safely move around work environment with many moving objects
Knowledge and experience with tools and materials
Broad knowledge of machining techniques to perform advanced setup operations
Proficient in the use of cutting tools & measuring equipment
Ability to read and understand blueprint drawings
Ability to work independently to troubleshoot and resolve problems concerning machining operations and tools
Ability to lead by example and be a good mentor to junior employees
Demonstrate clear written and verbal communication skills, including ability to promptly give and follow directions when working with others
Ability to handle multiple projects and supervisors at once
Must have good interpersonal and communication skills including ability to interact productively with coworkers and third parties
Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools
Ability to safely navigate the shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day
ight, outdoor hot/cold weather)
Lift and carry 50 pounds independently while potentially walking on uneven surfaces
Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas
Listen for unusual noises that signify equipment and machinery problems
Stay alert and focused up including occasional extended work periods
Must be willing and able to be on call after hours and work on weekends
Wear Personal Protective Equipment (PPE) at all designated times
Good computer skills and proficiency in Microsoft Office
Minimum Qualifications
High school diploma or GED equivalent
5+ years of experience running a CNC lathe
Must live within a 1 hour driving distance of the shop
Availability to work on call rotation as well as overtime
Experience machining (new and repair) API connections and or tapered connections
Preferred Qualifications
Experience with Mazak control
Experience training junior machinists
Additional Details
The Sr. Machinist must work with an emphasis on safety for themselves and others, including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.
#J-18808-Ljbffr