POWER MAKE-READY FIELD DESIGNER
Sigma Technologies, Ltd., Lawton, OK, United States
Overview
POWER MAKE-READY FIELD DESIGNER
— Overhead Utility Pole Design | Joint-Use Engineering | Field Data Collection
Primary Field Focus:
Lawton, OK and Surrounding Areas
Other areas:
McAlester and Tulsa metro-areas
ABOUT THIS OPPORTUNITY
We are seeking an experienced
Power Distribution / Make-Ready Designer
who is comfortable owning the
full lifecycle of utility pole design , from
field data collection
through
construction-ready engineering deliverables .
This role is ideal for designers who prefer to
personally verify field conditions , understand how
real-world infrastructure impacts design decisions , and want to reduce
handoff gaps between field and design teams .
Candidates must have prior experience in
overhead utility pole design
and
NESC-compliant make-ready or power distribution engineering . This is
not an entry-level or field-only role .
This position is remote but requires
regular local fieldwork
within the assigned territory, with
occasional overnight travel
as needed. When not collecting field data, design work will be done remotely working from home.
Applicants without prior experience in utility pole design or power distribution engineering may not be considered.
Note:
New hires are required to attend a
2-week paid, in-person onboarding and training
at our
Perrysburg, Ohio headquarters .
WHAT YOU WILL DO
Field Data Collection and Walkouts
Perform
utility pole walkouts
and
field surveys
to collect accurate
attachment, clearance, and structural data
Verify
pole ownership ,
attachment types ,
heights ,
spans ,
guying , and
equipment
in the field
Document
existing conditions
Capture
photos, measurements, GPS data, and field notes
to support design decisions
Research
right-of-way ,
easements ,
permitting constraints , and
property ownership
as necessary
Design and Engineering
Execute
overhead distribution
and
make-ready designs
in compliance with
NESC
and client standards
Evaluate
field conditions
and determine
make-ready requirements ,
attachment rearrangements , and
pole replacements
Perform
pole loading analysis
and
clearance resolution
Develop
complete, construction-ready design packages
Perform
end-to-end joint-use
and/or
general distribution design
Use design platforms such as
DDS ,
AutoCAD ,
MicroStation ,
Katapult ,
O-Calc ,
GIS , or utility-specific systems
Collaborate with
engineering ,
project management , and
quality
teams as needed
Perform or support
quality control reviews
as needed
TOP COMPETENCIES AND SKILLS
Make-Ready Engineering ,
Power Distribution Design ,
Utility Pole Walkouts ,
Field Data Collection ,
Joint-Use Design ,
Pole Loading Analysis ,
NESC Compliance ,
Overhead Distribution ,
Utility Pole Attachments ,
Right-of-Way and Permitting ,
Construction-Ready Design ,
DDS ,
GIS for Utility Design ,
CAD for Utility Design ,
Aerial Design ,
Utility Coordination
REQUIREMENTS
WHAT WE’RE LOOKING FOR
High school diploma or equivalent required ;
associate degree or higher
in
engineering ,
drafting , or a related field preferred
Minimum 1 year of experience
in
make-ready engineering ,
joint-use design , or
power distribution design
( 2+ years strongly preferred )
Demonstrated experience performing
utility pole walkouts
and
field data collection
specifically to support
design work
Proven experience applying
NESC standards ,
clearance analysis , and
pole loading concepts
Proficiency with
CAD or MicroStation ; strong preference for experience with
DDS ,
Katapult ,
O-Calc , or similar utility design platforms
Strong understanding of
overhead power distribution construction practices
Ability to
work independently in the field
and translate
field conditions into accurate designs
Valid driver’s license ,
active auto insurance , and ability to pass
background ,
drug , and
motor vehicle
screenings
Authorization to work in the United States
Willingness to perform
regular local fieldwork
with
occasional overnight travel
Ability to work a
Monday–Friday schedule
aligned to
Eastern Time , with flexibility for
local field needs.
PHYSICAL REQUIREMENTS
Ability to work extended periods using a
computer
for
design and documentation
Ability to perform
fieldwork , including
driving ,
walking long distances , navigating
uneven terrain , and working near
roadways
Ability to lift and carry equipment weighing up to
approximately 40 pounds
Visual acuity sufficient for
field inspection ,
measurement , and
design review
Ability to
communicate effectively
in both
field and office environments
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values —
Safety, Honesty, Truth, and Decency
— shape how we work and who we hire. We are TeamSigma.
* If you do not have Power Design experience, please refer to our other open positions:
https://bit.ly/TeamSigmaJobs
What we offer
No-cost monthly healthcare plan option for employees
Competitive pay
Medical, dental, and vision plans with up to
80% of the premium sponsored by Sigma
401(k)
plan with matching contributions up to
5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual orientation, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PIe71b6324375b-30050-40356989
#J-18808-Ljbffr
POWER MAKE-READY FIELD DESIGNER
— Overhead Utility Pole Design | Joint-Use Engineering | Field Data Collection
Primary Field Focus:
Lawton, OK and Surrounding Areas
Other areas:
McAlester and Tulsa metro-areas
ABOUT THIS OPPORTUNITY
We are seeking an experienced
Power Distribution / Make-Ready Designer
who is comfortable owning the
full lifecycle of utility pole design , from
field data collection
through
construction-ready engineering deliverables .
This role is ideal for designers who prefer to
personally verify field conditions , understand how
real-world infrastructure impacts design decisions , and want to reduce
handoff gaps between field and design teams .
Candidates must have prior experience in
overhead utility pole design
and
NESC-compliant make-ready or power distribution engineering . This is
not an entry-level or field-only role .
This position is remote but requires
regular local fieldwork
within the assigned territory, with
occasional overnight travel
as needed. When not collecting field data, design work will be done remotely working from home.
Applicants without prior experience in utility pole design or power distribution engineering may not be considered.
Note:
New hires are required to attend a
2-week paid, in-person onboarding and training
at our
Perrysburg, Ohio headquarters .
WHAT YOU WILL DO
Field Data Collection and Walkouts
Perform
utility pole walkouts
and
field surveys
to collect accurate
attachment, clearance, and structural data
Verify
pole ownership ,
attachment types ,
heights ,
spans ,
guying , and
equipment
in the field
Document
existing conditions
Capture
photos, measurements, GPS data, and field notes
to support design decisions
Research
right-of-way ,
easements ,
permitting constraints , and
property ownership
as necessary
Design and Engineering
Execute
overhead distribution
and
make-ready designs
in compliance with
NESC
and client standards
Evaluate
field conditions
and determine
make-ready requirements ,
attachment rearrangements , and
pole replacements
Perform
pole loading analysis
and
clearance resolution
Develop
complete, construction-ready design packages
Perform
end-to-end joint-use
and/or
general distribution design
Use design platforms such as
DDS ,
AutoCAD ,
MicroStation ,
Katapult ,
O-Calc ,
GIS , or utility-specific systems
Collaborate with
engineering ,
project management , and
quality
teams as needed
Perform or support
quality control reviews
as needed
TOP COMPETENCIES AND SKILLS
Make-Ready Engineering ,
Power Distribution Design ,
Utility Pole Walkouts ,
Field Data Collection ,
Joint-Use Design ,
Pole Loading Analysis ,
NESC Compliance ,
Overhead Distribution ,
Utility Pole Attachments ,
Right-of-Way and Permitting ,
Construction-Ready Design ,
DDS ,
GIS for Utility Design ,
CAD for Utility Design ,
Aerial Design ,
Utility Coordination
REQUIREMENTS
WHAT WE’RE LOOKING FOR
High school diploma or equivalent required ;
associate degree or higher
in
engineering ,
drafting , or a related field preferred
Minimum 1 year of experience
in
make-ready engineering ,
joint-use design , or
power distribution design
( 2+ years strongly preferred )
Demonstrated experience performing
utility pole walkouts
and
field data collection
specifically to support
design work
Proven experience applying
NESC standards ,
clearance analysis , and
pole loading concepts
Proficiency with
CAD or MicroStation ; strong preference for experience with
DDS ,
Katapult ,
O-Calc , or similar utility design platforms
Strong understanding of
overhead power distribution construction practices
Ability to
work independently in the field
and translate
field conditions into accurate designs
Valid driver’s license ,
active auto insurance , and ability to pass
background ,
drug , and
motor vehicle
screenings
Authorization to work in the United States
Willingness to perform
regular local fieldwork
with
occasional overnight travel
Ability to work a
Monday–Friday schedule
aligned to
Eastern Time , with flexibility for
local field needs.
PHYSICAL REQUIREMENTS
Ability to work extended periods using a
computer
for
design and documentation
Ability to perform
fieldwork , including
driving ,
walking long distances , navigating
uneven terrain , and working near
roadways
Ability to lift and carry equipment weighing up to
approximately 40 pounds
Visual acuity sufficient for
field inspection ,
measurement , and
design review
Ability to
communicate effectively
in both
field and office environments
ABOUT SIGMA TECHNOLOGIES
Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values —
Safety, Honesty, Truth, and Decency
— shape how we work and who we hire. We are TeamSigma.
* If you do not have Power Design experience, please refer to our other open positions:
https://bit.ly/TeamSigmaJobs
What we offer
No-cost monthly healthcare plan option for employees
Competitive pay
Medical, dental, and vision plans with up to
80% of the premium sponsored by Sigma
401(k)
plan with matching contributions up to
5% of salary
Paid holidays, vacation, and sick time
Education and professional licensing assistance programs
This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs.
Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual orientation, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law.
PIe71b6324375b-30050-40356989
#J-18808-Ljbffr