CAD Design Technician
Rose International, Saint Louis, MO, United States
Job Overview
Position: CAD Design Technician
Location: Creve Coeur, MO, USA, 63141
Employment Type: Temporary Full‑Time (13 months)
Minimum Hourly Rate: $55.00
Maximum Hourly Rate: $65.00
Qualifications
7+ years of CAD design/drafting experience, preferably with a focus on electrical power and control systems.
Expert‑level AutoCAD experience required; strong ability to create and modify complex electrical drawings.
Deep knowledge of electrical design principles, including breaker sizing, load calculations, and power distribution layouts.
Experience conducting field measurements and developing designs based on real‑world data.
Ability to collaborate with engineers, designers, and plant personnel.
Strong attention to detail, accuracy, and documentation practices.
Responsibilities
Electrical Design & Drafting
Work closely with Electrical Engineers and Designers to create detailed electrical drawings, including:
Power and control wiring diagrams
Instrumentation loops
Electrical schematics
Cable tray layouts
Electrical and instrumentation details
Cable schedules
Produce accurate 2D/3D AutoCAD drawings based on field findings and engineering direction.
Ensure drawings comply with internal standards, safety requirements, and industry codes.
Field Work & Data Collection
Conduct on‑site field visits to gather measurements, verify existing installations, and collect data needed for new or updated designs.
Document field conditions thoroughly (measurements, equipment labeling, routing information, site photos) and translate findings into updated engineering drawings.
Interface with plant personnel when needed to clarify equipment access, layouts, and existing electrical infrastructure.
Electrical System Expertise
Demonstrate strong understanding of electrical power distribution systems.
Perform sizing and selection of circuit breakers and other protective devices as required for design packages.
Read, interpret, and update one line diagrams, panel schedules, and equipment lists.
Collaboration & Project Support
Work with project teams, including designers and engineers, throughout the design and review process.
Support design reviews by providing drawing updates, design clarifications, and field verification as needed.
Maintain organized documentation and revision control across multiple projects.
Travel & Work Environment
Estimated travel: ~25%, primarily for field visits.
Driving required only for sporadic site visits; most work is local to Chesterfield.
When travel is needed, leased fleet vehicles are available.
Typical site locations include Missouri, Illinois, Indiana, and Iowa.
The CAD Design Technician uses computer‑aided design (CAD) software to create detailed 2D and 3D models for engineering and manufacturing projects. This role requires strong technical skills, attention to detail, and a solid understanding of electrical design principles and manufacturing processes. The ideal candidate has extensive experience with electrical power systems, field data collection, and translating real‑world conditions into accurate AutoCAD drawings.
Important Notes
Only those lawfully authorized to work in the designated country associated with the position will be considered.
Please note that all Position start dates and duration are estimates and may be reduced or lengthened based upon a client’s business needs and requirements.
Equal Opportunity Statement
Rose International is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender expression or identity, national origin, arrest and conviction records, disability, veteran status or any other characteristic protected by law. Positions located in San Francisco and Los Angeles, California will be administered in accordance with their respective Fair Chance Ordinances.
Rose International has an official agreement (ID #132522), effective June 30, 2008, with the U.S. Department of Homeland Security, U.S. Citizenship and Immigration Services, Employment Verification Program (E‑Verify). (Posting required by OCGA 13/10‑91.)
#J-18808-Ljbffr
Position: CAD Design Technician
Location: Creve Coeur, MO, USA, 63141
Employment Type: Temporary Full‑Time (13 months)
Minimum Hourly Rate: $55.00
Maximum Hourly Rate: $65.00
Qualifications
7+ years of CAD design/drafting experience, preferably with a focus on electrical power and control systems.
Expert‑level AutoCAD experience required; strong ability to create and modify complex electrical drawings.
Deep knowledge of electrical design principles, including breaker sizing, load calculations, and power distribution layouts.
Experience conducting field measurements and developing designs based on real‑world data.
Ability to collaborate with engineers, designers, and plant personnel.
Strong attention to detail, accuracy, and documentation practices.
Responsibilities
Electrical Design & Drafting
Work closely with Electrical Engineers and Designers to create detailed electrical drawings, including:
Power and control wiring diagrams
Instrumentation loops
Electrical schematics
Cable tray layouts
Electrical and instrumentation details
Cable schedules
Produce accurate 2D/3D AutoCAD drawings based on field findings and engineering direction.
Ensure drawings comply with internal standards, safety requirements, and industry codes.
Field Work & Data Collection
Conduct on‑site field visits to gather measurements, verify existing installations, and collect data needed for new or updated designs.
Document field conditions thoroughly (measurements, equipment labeling, routing information, site photos) and translate findings into updated engineering drawings.
Interface with plant personnel when needed to clarify equipment access, layouts, and existing electrical infrastructure.
Electrical System Expertise
Demonstrate strong understanding of electrical power distribution systems.
Perform sizing and selection of circuit breakers and other protective devices as required for design packages.
Read, interpret, and update one line diagrams, panel schedules, and equipment lists.
Collaboration & Project Support
Work with project teams, including designers and engineers, throughout the design and review process.
Support design reviews by providing drawing updates, design clarifications, and field verification as needed.
Maintain organized documentation and revision control across multiple projects.
Travel & Work Environment
Estimated travel: ~25%, primarily for field visits.
Driving required only for sporadic site visits; most work is local to Chesterfield.
When travel is needed, leased fleet vehicles are available.
Typical site locations include Missouri, Illinois, Indiana, and Iowa.
The CAD Design Technician uses computer‑aided design (CAD) software to create detailed 2D and 3D models for engineering and manufacturing projects. This role requires strong technical skills, attention to detail, and a solid understanding of electrical design principles and manufacturing processes. The ideal candidate has extensive experience with electrical power systems, field data collection, and translating real‑world conditions into accurate AutoCAD drawings.
Important Notes
Only those lawfully authorized to work in the designated country associated with the position will be considered.
Please note that all Position start dates and duration are estimates and may be reduced or lengthened based upon a client’s business needs and requirements.
Equal Opportunity Statement
Rose International is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender expression or identity, national origin, arrest and conviction records, disability, veteran status or any other characteristic protected by law. Positions located in San Francisco and Los Angeles, California will be administered in accordance with their respective Fair Chance Ordinances.
Rose International has an official agreement (ID #132522), effective June 30, 2008, with the U.S. Department of Homeland Security, U.S. Citizenship and Immigration Services, Employment Verification Program (E‑Verify). (Posting required by OCGA 13/10‑91.)
#J-18808-Ljbffr