Design Engineer
Shaft Drillers, Trenton, NJ, United States
SDI Management LLC
Design Engineer
130 Meadow Ridge Road
Mount Morris, PA 15349
Location
Will vary, depending on job location.
Purpose
Working under the direction of the R&D manager, the Design Engineer will support engineering design activities by providing design, drafting, testing, and implementation support for projects as assigned.
Responsibilities
Reads and studies all project related documents (drawings, plans, notes, internal client specifications, third party specifications, etc.)
Stores and maintains assigned project file(s) for quick access and for future reference
Ensures that project documentation is being prepared accurately, that consumable materials and work allocations are cost coded correctly and production quantities are being tracked and reported
Maintains milestone tracking spreadsheet(s) for assigned projects to include timelines, deliverables, and other measurable metrics documented for the project
Assists the R&D Manager by performing calculations, design edits, and obtaining quotes for required subs, materials, etc. that are required throughout the project
Attends project planning meetings and takes/distributes meeting minutes in accordance with the R&D Manager's instructions
Assists in the preparation and review of resource scheduling within the three week look ahead schedule and distributes the final schedule as approved by the R&D manager to operations when directed
Assists the R&D Manager with documenting and tracking of Extra Work costs, assuring out of scope work is being captured as a Change Order and that Extra work is not being performed without proper authorization
Physical Requirements
Ability to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. PPE includes but is not limited to: hard hat, task specific safety glasses, life vest, respirators, task specific hearing protection, task specific safety shoes (steel toe or metatarsal), and /or other protective equipment as required by the work performed and may change based on the location in which the work is being completed
Ability to walk, step, climb, and otherwise move from one location on the job site to another. Depending on equipment in use, the chosen candidate must be able to physically get into and get out of equipment through the use of vertical mounted ladders up to and including 10’ or more in height
Ability to visually see worksite environment and observe equipment operations (either naturally or with corrective lenses)
Ability to stand, stoop, kneel, squat, climb, and sit for long periods of time
Ability to complete repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work
Ability to climb vertical ladders. Working at elevated heights
Ability to lift up to and including fifty (50) lb. objects as required
Ability to carry up to and including fifty (50) lb. objects as required
Ability to adapt to outdoor conditions and prolonged exposure to the elements
Ability to work outdoors in all-weather conditions
Education
Associates or Bachelor’s Degree in Industrial, Civil, Mechanical Engineering, Construction Management, Business Management or a related field of study
Experience
1-2+ years of related mechanical engineering design / electronic drafting experience preferred
Skills & Abilities
Ability to proficiently utilize Microsoft Office Suite Products including: Excel and Word, Microsoft Project and Outlook
Ability to proficiently utilize SolidWorks for mechanical engineering design assignments
Ability to demonstrate excellent communication and problem solving skills
Ability to demonstrate strong analytical skills
Ability to demonstrate a strong attention to detail while remaining highly organized and focused on long term goals
Ability to multitask in a high paced work environment with changing priorities
Ability to communicate effective in both verbal and written communications
Ability to work within SolidWorks or similar design software
Ability to travel extensively and for extended periods of time
EEO
SDI Management LLC is an Equal Opportunity Employer, including disabilities and protected veteran status. The Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. The Company complies with applicable state and local laws governing non-discrimination in employment. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Accessibility: If you need an accommodation to complete the application process please contact Human Resources at
Phone: +1 (304) 291.0175
Email: HR@shaftdrillers.com
#J-18808-Ljbffr
Design Engineer
130 Meadow Ridge Road
Mount Morris, PA 15349
Location
Will vary, depending on job location.
Purpose
Working under the direction of the R&D manager, the Design Engineer will support engineering design activities by providing design, drafting, testing, and implementation support for projects as assigned.
Responsibilities
Reads and studies all project related documents (drawings, plans, notes, internal client specifications, third party specifications, etc.)
Stores and maintains assigned project file(s) for quick access and for future reference
Ensures that project documentation is being prepared accurately, that consumable materials and work allocations are cost coded correctly and production quantities are being tracked and reported
Maintains milestone tracking spreadsheet(s) for assigned projects to include timelines, deliverables, and other measurable metrics documented for the project
Assists the R&D Manager by performing calculations, design edits, and obtaining quotes for required subs, materials, etc. that are required throughout the project
Attends project planning meetings and takes/distributes meeting minutes in accordance with the R&D Manager's instructions
Assists in the preparation and review of resource scheduling within the three week look ahead schedule and distributes the final schedule as approved by the R&D manager to operations when directed
Assists the R&D Manager with documenting and tracking of Extra Work costs, assuring out of scope work is being captured as a Change Order and that Extra work is not being performed without proper authorization
Physical Requirements
Ability to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. PPE includes but is not limited to: hard hat, task specific safety glasses, life vest, respirators, task specific hearing protection, task specific safety shoes (steel toe or metatarsal), and /or other protective equipment as required by the work performed and may change based on the location in which the work is being completed
Ability to walk, step, climb, and otherwise move from one location on the job site to another. Depending on equipment in use, the chosen candidate must be able to physically get into and get out of equipment through the use of vertical mounted ladders up to and including 10’ or more in height
Ability to visually see worksite environment and observe equipment operations (either naturally or with corrective lenses)
Ability to stand, stoop, kneel, squat, climb, and sit for long periods of time
Ability to complete repetitive movements by feet, shoulders, arms, wrists, hands and back in performance of work
Ability to climb vertical ladders. Working at elevated heights
Ability to lift up to and including fifty (50) lb. objects as required
Ability to carry up to and including fifty (50) lb. objects as required
Ability to adapt to outdoor conditions and prolonged exposure to the elements
Ability to work outdoors in all-weather conditions
Education
Associates or Bachelor’s Degree in Industrial, Civil, Mechanical Engineering, Construction Management, Business Management or a related field of study
Experience
1-2+ years of related mechanical engineering design / electronic drafting experience preferred
Skills & Abilities
Ability to proficiently utilize Microsoft Office Suite Products including: Excel and Word, Microsoft Project and Outlook
Ability to proficiently utilize SolidWorks for mechanical engineering design assignments
Ability to demonstrate excellent communication and problem solving skills
Ability to demonstrate strong analytical skills
Ability to demonstrate a strong attention to detail while remaining highly organized and focused on long term goals
Ability to multitask in a high paced work environment with changing priorities
Ability to communicate effective in both verbal and written communications
Ability to work within SolidWorks or similar design software
Ability to travel extensively and for extended periods of time
EEO
SDI Management LLC is an Equal Opportunity Employer, including disabilities and protected veteran status. The Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. The Company complies with applicable state and local laws governing non-discrimination in employment. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Accessibility: If you need an accommodation to complete the application process please contact Human Resources at
Phone: +1 (304) 291.0175
Email: HR@shaftdrillers.com
#J-18808-Ljbffr