Slitter Operator (1st shift)
TekniPlex, Winston Salem, NC, United States
Job Summary
The purpose of the Slitter Operator position is to convert in-process or finished master rolls per production order and customer's specifications.
Shift Hours
Shift hours:
6:45 am - 3:00 pm
Base Rate
Base Rate:
$19.30/hr.
Job Responsibilities
Follow all TekniPlex plant safety rules and standards.
Comply with Good Manufacturing Practices (GMP).
Load a machine payoff using an overhead hoist and thread the material through the machine initially by hand and then jogging it through the cutting press.
Input data into the shop floor PC, check and validate labels are correct from computer on to the corresponding rolls.
Select, clean, install spacers and knives on shafts.
Thread sheeting through slitter and verify dimension of slit specifications.
Secure slit strips on cores, adjust guides and roller tension, thread edge trim to scrap winder and start machine.
Observe slitting and rewinding operation and examine cut strips for flatness, wrinkles and other defects.
Observe the machine and communicate scrap, mechanical or quality issues timely.
Arrange stacking rolls according to packaging specification.
Maintain standards relating to productivity, quality and scrap daily.
Fill out and submit required paperwork daily.
Other duties as assigned.
Qualifications
Safety conscious.
Comfortable standing for entire shift.
Ability to lift up to 50 lbs. repetitively.
Previous manufacturing experience preferred.
Previous forklift experience preferred.
2 years of experience in manufacturing facility preferred.
Excellent communication skills for this hands‑on role.
Must be able to read/write/speak English.
Minimum of a High School Diploma.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job,
The employee is regularly required to stand; walk; use hands to finger, handle, push, pull and carry; and hear.
The employee frequently must talk and reach with hands and arms.
The employee will frequently work with sharp tools, such as knives and ledgers.
The employee is frequently required to climb or balance and stoop, kneel, or crouch.
The employee must regularly lift and/or move up to 12 pounds, and occasionally lift and/or move up to 50 pounds.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job,
The employee is regularly exposed to moving mechanical parts and vibration.
The employee is occasionally exposed to humid conditions and hot temperature.
The employee is regularly required to work with others, but may occasionally work alone.
Benefits
TekniPlex provides a comprehensive and flexible benefits program that you can customize to fit your personal needs. Our programs offer you and your family health care coverage and financial security. You can take advantage of life insurance, disability coverage and voluntary benefits for extra financial protection and peace of mind. Plus, our work‑life benefits provide support and assistance whenever you need it.
Some of your benefits are paid in full by TekniPlex and some costs are shared between you and TekniPlex. Other benefits are made available to you at reasonable group rates.
Medical Coverage
Prescription Drug Coverage
Vision Coverage
Employee Assistance Program
Health Savings Account (HSA)
Flexible Spending Account (FSA)
Basic Term Life/AD&D Insurance
Voluntary Life/AD&D Insurance
Short Term Disability (STD)
Long Term Disability (LTD)
Voluntary Buy‑Up LTD
Hospital Indemnity
Critical Illness
401(k) Retirement Savings Plan
Daily Pay
Business Travel Insurance
Legal Plan
Identity Protection
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr
The purpose of the Slitter Operator position is to convert in-process or finished master rolls per production order and customer's specifications.
Shift Hours
Shift hours:
6:45 am - 3:00 pm
Base Rate
Base Rate:
$19.30/hr.
Job Responsibilities
Follow all TekniPlex plant safety rules and standards.
Comply with Good Manufacturing Practices (GMP).
Load a machine payoff using an overhead hoist and thread the material through the machine initially by hand and then jogging it through the cutting press.
Input data into the shop floor PC, check and validate labels are correct from computer on to the corresponding rolls.
Select, clean, install spacers and knives on shafts.
Thread sheeting through slitter and verify dimension of slit specifications.
Secure slit strips on cores, adjust guides and roller tension, thread edge trim to scrap winder and start machine.
Observe slitting and rewinding operation and examine cut strips for flatness, wrinkles and other defects.
Observe the machine and communicate scrap, mechanical or quality issues timely.
Arrange stacking rolls according to packaging specification.
Maintain standards relating to productivity, quality and scrap daily.
Fill out and submit required paperwork daily.
Other duties as assigned.
Qualifications
Safety conscious.
Comfortable standing for entire shift.
Ability to lift up to 50 lbs. repetitively.
Previous manufacturing experience preferred.
Previous forklift experience preferred.
2 years of experience in manufacturing facility preferred.
Excellent communication skills for this hands‑on role.
Must be able to read/write/speak English.
Minimum of a High School Diploma.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job,
The employee is regularly required to stand; walk; use hands to finger, handle, push, pull and carry; and hear.
The employee frequently must talk and reach with hands and arms.
The employee will frequently work with sharp tools, such as knives and ledgers.
The employee is frequently required to climb or balance and stoop, kneel, or crouch.
The employee must regularly lift and/or move up to 12 pounds, and occasionally lift and/or move up to 50 pounds.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job,
The employee is regularly exposed to moving mechanical parts and vibration.
The employee is occasionally exposed to humid conditions and hot temperature.
The employee is regularly required to work with others, but may occasionally work alone.
Benefits
TekniPlex provides a comprehensive and flexible benefits program that you can customize to fit your personal needs. Our programs offer you and your family health care coverage and financial security. You can take advantage of life insurance, disability coverage and voluntary benefits for extra financial protection and peace of mind. Plus, our work‑life benefits provide support and assistance whenever you need it.
Some of your benefits are paid in full by TekniPlex and some costs are shared between you and TekniPlex. Other benefits are made available to you at reasonable group rates.
Medical Coverage
Prescription Drug Coverage
Vision Coverage
Employee Assistance Program
Health Savings Account (HSA)
Flexible Spending Account (FSA)
Basic Term Life/AD&D Insurance
Voluntary Life/AD&D Insurance
Short Term Disability (STD)
Long Term Disability (LTD)
Voluntary Buy‑Up LTD
Hospital Indemnity
Critical Illness
401(k) Retirement Savings Plan
Daily Pay
Business Travel Insurance
Legal Plan
Identity Protection
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr