QUALITY CONTROL INSPECTOR II (Aerospace/Defense)
Marvin Engineering Company, Los Angeles, CA, United States
The Marvin Group is a Strategic Partner for Global
Alternate Mission Equipment and Sustainment
The Marvin Group, a leading defense contractor, plays a crucial role in the development and manufacturing of various systems for military aerospace and vehicles. Based in Southern California near the Los Angeles International Airport, The Marvin Group consists of Marvin Engineering (MEC), Marvin Test Solutions (MTS) and Marvin Land Systems (MLS). Marvin Engineering designs and produces military Alternate Mission Equipment. Marvin Test Solutions designs and manufactures armament Test Equipment. Marvin Land Systems specializes in the design and build of power and thermal management systems. For over 60 years we have maintained “ A Tradition of Excellence ”, serving as a trusted source for our unwavering commitment to supporting all branches of the Department of Defense and our global allies. Our collaboration extends across a diverse array of programs and platforms, including major military prime contractors such as Lockheed Martin, Northrop Grumman, and Raytheon.
SCOPE
Quality Control Inspector inspects products for compliance to MLS processes, procedures, and contractual obligations with experience in inspection and an understanding of GD&T concepts. This individual performs all visual and dimensional inspections and in addition, uses computer aided inspection equipment.
RESPONSIBLITIES
Perform program independent inspections, validations, and/or verifications of assigned items to ensure compliance to MLS processes, procedures, and contractual obligations
Perform independent inspections of assigned tasks (documentation reviews, hardware inspection, assembly inspection, tests validation, etc. using blueprints (2D drawings,3D models), specifications, contractual documents, visual inspection methods, and more
Perform dimensional and characteristics inspections and measurements using variety of hand and bench tools which may include: various micrometers, bore gages, depth gages, dial indicators, height gages, etc. as well as optical comparators, hardness checkers, profilometers, as required
Understand, use and measure basic GD&T concepts such as: Straightness, Flatness, Circularity, Cylindricity, Perpendicularity, and Parallelism as applicable to the job
Able to operate/program CMM and other computer aided inspection tools (depending on level)
Able to analyze, interpret, and present CMM data output and results (depending on level)
Perform inspections of components using surface plate inspection methods and/or computer aided inspection equipment such as CMMs, FARO/Romer Arms, Laser Tracker, Video Measuring Machines, etc. (depending on level)
May need to interpret and use programs and models for computer aided inspection equipment
May be asked to perform higher level inspections while under supervision depending on experience/skill level
May be asked to perform source inspections or otherwise travel in support of MLS quality needs
May need to interface with engineers, suppliers, and/or customers
May be able to perform lower level inspection tasks or train lower level inspectors as applicable
SKILLS/REQUIREMENTS
High School graduate diploma or a General Educational Development (GED) certificate
Five to ten years minimum experience as a QC inspector
Experience in an aerospace and defense production and manufacturing environment is preferred
Must be able to read and understand mechanical drawings (notes, features, views, tolerances, etc.) and specifications
Experience using surface plates, CMMs, and other inspection equipment (depending on level)
Understand and use GD&T concepts (depending on level)
Able to perform basic algebra and trigonometry
Basic computer skills
Able to follow instructions and work independently.
Must be able to speak/read/write English
Able to work with others and be a team player
Experience in working with SAP MRP environment is a plus
Certifications in GD& T, Quality Inspection, relevant ASQ areas, CMM/FARO certificates, or college degrees in Quality Assurance, Engineering, or other technical fields are a PLUS
Must be able to lift up to 35 lbs
This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee.
Interested parties please apply online and submit resume to https://jobs.marvingroup.com/
The Marvin Group is an EEO/Disability/Vets Employer. Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit www.dhs.gov/E-Verify. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact People & Culture at 310.674.5030.
#J-18808-Ljbffr
Alternate Mission Equipment and Sustainment
The Marvin Group, a leading defense contractor, plays a crucial role in the development and manufacturing of various systems for military aerospace and vehicles. Based in Southern California near the Los Angeles International Airport, The Marvin Group consists of Marvin Engineering (MEC), Marvin Test Solutions (MTS) and Marvin Land Systems (MLS). Marvin Engineering designs and produces military Alternate Mission Equipment. Marvin Test Solutions designs and manufactures armament Test Equipment. Marvin Land Systems specializes in the design and build of power and thermal management systems. For over 60 years we have maintained “ A Tradition of Excellence ”, serving as a trusted source for our unwavering commitment to supporting all branches of the Department of Defense and our global allies. Our collaboration extends across a diverse array of programs and platforms, including major military prime contractors such as Lockheed Martin, Northrop Grumman, and Raytheon.
SCOPE
Quality Control Inspector inspects products for compliance to MLS processes, procedures, and contractual obligations with experience in inspection and an understanding of GD&T concepts. This individual performs all visual and dimensional inspections and in addition, uses computer aided inspection equipment.
RESPONSIBLITIES
Perform program independent inspections, validations, and/or verifications of assigned items to ensure compliance to MLS processes, procedures, and contractual obligations
Perform independent inspections of assigned tasks (documentation reviews, hardware inspection, assembly inspection, tests validation, etc. using blueprints (2D drawings,3D models), specifications, contractual documents, visual inspection methods, and more
Perform dimensional and characteristics inspections and measurements using variety of hand and bench tools which may include: various micrometers, bore gages, depth gages, dial indicators, height gages, etc. as well as optical comparators, hardness checkers, profilometers, as required
Understand, use and measure basic GD&T concepts such as: Straightness, Flatness, Circularity, Cylindricity, Perpendicularity, and Parallelism as applicable to the job
Able to operate/program CMM and other computer aided inspection tools (depending on level)
Able to analyze, interpret, and present CMM data output and results (depending on level)
Perform inspections of components using surface plate inspection methods and/or computer aided inspection equipment such as CMMs, FARO/Romer Arms, Laser Tracker, Video Measuring Machines, etc. (depending on level)
May need to interpret and use programs and models for computer aided inspection equipment
May be asked to perform higher level inspections while under supervision depending on experience/skill level
May be asked to perform source inspections or otherwise travel in support of MLS quality needs
May need to interface with engineers, suppliers, and/or customers
May be able to perform lower level inspection tasks or train lower level inspectors as applicable
SKILLS/REQUIREMENTS
High School graduate diploma or a General Educational Development (GED) certificate
Five to ten years minimum experience as a QC inspector
Experience in an aerospace and defense production and manufacturing environment is preferred
Must be able to read and understand mechanical drawings (notes, features, views, tolerances, etc.) and specifications
Experience using surface plates, CMMs, and other inspection equipment (depending on level)
Understand and use GD&T concepts (depending on level)
Able to perform basic algebra and trigonometry
Basic computer skills
Able to follow instructions and work independently.
Must be able to speak/read/write English
Able to work with others and be a team player
Experience in working with SAP MRP environment is a plus
Certifications in GD& T, Quality Inspection, relevant ASQ areas, CMM/FARO certificates, or college degrees in Quality Assurance, Engineering, or other technical fields are a PLUS
Must be able to lift up to 35 lbs
This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee.
Interested parties please apply online and submit resume to https://jobs.marvingroup.com/
The Marvin Group is an EEO/Disability/Vets Employer. Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit www.dhs.gov/E-Verify. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact People & Culture at 310.674.5030.
#J-18808-Ljbffr