Non-Craft Welder
Bally Design, Gary, IN, United States
Overview
HWI has a fantastic opportunity to join our team as a Non-Craft Welder. The Non-Craft Welder is responsible for maintaining a clean and safe work environment, maintaining professional working relationships with co-workers, and performing welding duties throughout the shop.
Responsibilities
Actively demonstrates and promotes safety and a safe work environment and holds their team accountable to drive a best in industry safety culture.
Audits and observes to ensure our product meets or exceeds quality standards. Owns Quality Control compliance for their assigned working area.
Responsible for all welding duties throughout the shop utilizing types of welders including but not limited to MIG welders, arc welders and plasma cutting torches to perform all aspects of welding duties both within the welding shop and throughout the factory on an as needed basis.
Welds are typically performed using the Flux Core Arc Welding method and may be required to weld using the Shielded Metal Arc Welding method. Must successfully be able to weld component positions (2G-Horizontal, 3G-Vertical, 4G-Overhead).
Will be required to continue to demonstrate the ability to apply welds in a satisfactory form in flat, vertical, horizontal and overhead positions in accordance with National Standards (ASME and AWS) as required.
Performs minor preventative maintenance on equipment and/or partners with maintenance to solve equipment changes and problems.
Actively participates in report out and production meetings.
Ability to effectively receive and decipher both ambiguous and direct/detailed instructions, provides innovative solutions, and both work independently or as a team member.
Requires general supervision, usually operating alone using standard procedures and requesting guidance when in doubt.
May at times be required to perform some basic assembly tasks.
Qualifications
Requires a high school diploma or equivalent preferred.
Ability to demonstrate necessary welding capability as outlined in the requirements.
Understanding of basic safety/OSHA standards.
Some mechanical aptitude.
Some manufacturing experience helpful.
Requires working knowledge in the use and basic repair of welding, carbon arc gouging and oxy-fuel cutting equipment, including the proper setup and basic maintenance of welding machines and wire feeders including replacement of the wire liner as needed.
May also operate an oxygen lance when required.
Physical and Environmental Requirements
Physical Activity: Welders are required to tolerate constant holding and grasping with both hands for extended periods, attain and hold awkward positions for extended periods, and may walk across uneven surfaces and steps.
Lifting: Requires lifting up to 60 lbs, pushing up to 100 lbs and pulling up to 80 lbs.
Vision: Requires accurate close, distance, color and peripheral vision, including the ability to adjust focus and use peripheral vision.
Environment: Requires more than 2/3 of the time near moving mechanical parts, exposure to fumes and airborne particles, outdoor weather conditions; 1/3 to 2/3 of the time in wet or humid conditions, extreme heat or cold, and exposure to toxic or caustic chemicals; less than 1/3 of the time in office settings, in high places, at risk of electrical shock and near vibration.
Noise: Requires working in very loud conditions (over 85 decibels).
About Us
HWI, a member of Calderys
HWI is the largest supplier of refractory products and services in the United States.
With manufacturing sites and distribution centers across the Americas, as well as the major refractory industry research facility in North America, HWI serves virtually every major industry that requires refractory solutions to enhance production and protect assets. HWI is consistently recognized for its talented experts, industry firsts, and intensely driven excellence.
We’re actively expanding our team of dedicated, enthusiastic people — particularly in research and development, engineering and manufacturing, product management, and sales. As a dynamic, growing global refractory leader, we offer competitive compensation, benefits packages, and wellness programs. As an Equal Opportunity Employer, we are committed to a diverse workforce.
For more information, visit thinkhwi.com
#J-18808-Ljbffr
HWI has a fantastic opportunity to join our team as a Non-Craft Welder. The Non-Craft Welder is responsible for maintaining a clean and safe work environment, maintaining professional working relationships with co-workers, and performing welding duties throughout the shop.
Responsibilities
Actively demonstrates and promotes safety and a safe work environment and holds their team accountable to drive a best in industry safety culture.
Audits and observes to ensure our product meets or exceeds quality standards. Owns Quality Control compliance for their assigned working area.
Responsible for all welding duties throughout the shop utilizing types of welders including but not limited to MIG welders, arc welders and plasma cutting torches to perform all aspects of welding duties both within the welding shop and throughout the factory on an as needed basis.
Welds are typically performed using the Flux Core Arc Welding method and may be required to weld using the Shielded Metal Arc Welding method. Must successfully be able to weld component positions (2G-Horizontal, 3G-Vertical, 4G-Overhead).
Will be required to continue to demonstrate the ability to apply welds in a satisfactory form in flat, vertical, horizontal and overhead positions in accordance with National Standards (ASME and AWS) as required.
Performs minor preventative maintenance on equipment and/or partners with maintenance to solve equipment changes and problems.
Actively participates in report out and production meetings.
Ability to effectively receive and decipher both ambiguous and direct/detailed instructions, provides innovative solutions, and both work independently or as a team member.
Requires general supervision, usually operating alone using standard procedures and requesting guidance when in doubt.
May at times be required to perform some basic assembly tasks.
Qualifications
Requires a high school diploma or equivalent preferred.
Ability to demonstrate necessary welding capability as outlined in the requirements.
Understanding of basic safety/OSHA standards.
Some mechanical aptitude.
Some manufacturing experience helpful.
Requires working knowledge in the use and basic repair of welding, carbon arc gouging and oxy-fuel cutting equipment, including the proper setup and basic maintenance of welding machines and wire feeders including replacement of the wire liner as needed.
May also operate an oxygen lance when required.
Physical and Environmental Requirements
Physical Activity: Welders are required to tolerate constant holding and grasping with both hands for extended periods, attain and hold awkward positions for extended periods, and may walk across uneven surfaces and steps.
Lifting: Requires lifting up to 60 lbs, pushing up to 100 lbs and pulling up to 80 lbs.
Vision: Requires accurate close, distance, color and peripheral vision, including the ability to adjust focus and use peripheral vision.
Environment: Requires more than 2/3 of the time near moving mechanical parts, exposure to fumes and airborne particles, outdoor weather conditions; 1/3 to 2/3 of the time in wet or humid conditions, extreme heat or cold, and exposure to toxic or caustic chemicals; less than 1/3 of the time in office settings, in high places, at risk of electrical shock and near vibration.
Noise: Requires working in very loud conditions (over 85 decibels).
About Us
HWI, a member of Calderys
HWI is the largest supplier of refractory products and services in the United States.
With manufacturing sites and distribution centers across the Americas, as well as the major refractory industry research facility in North America, HWI serves virtually every major industry that requires refractory solutions to enhance production and protect assets. HWI is consistently recognized for its talented experts, industry firsts, and intensely driven excellence.
We’re actively expanding our team of dedicated, enthusiastic people — particularly in research and development, engineering and manufacturing, product management, and sales. As a dynamic, growing global refractory leader, we offer competitive compensation, benefits packages, and wellness programs. As an Equal Opportunity Employer, we are committed to a diverse workforce.
For more information, visit thinkhwi.com
#J-18808-Ljbffr