Setter - 2nd Shift
Aerotek, Santa Ana, CA, United States
Setter
2nd Shift
The Setter on 2nd shift is responsible for planning and performing mold changes on compression and injection molding machines, setting all process parameters to produce high-quality rubber parts for the aerospace industry. This role supports a highly organized, safety-focused manufacturing environment and offers hands-on training for individuals who are eager to build a long-term career in manufacturing.
Shift: 2:30pm - 11pm (OT after shift stay until 1am if needed)
$21/hr
Responsibilities
Perform and plan mold changes on injection and compression molding machines to ensure efficient production of quality parts.
Set and adjust process parameters such as temperature, cure time, bumping, and pressure to achieve process approval and stable production.
Carry out part changeovers and machine setups in an efficient manner to reduce downtime and scrap in line with defined targets.
Maintain strict adherence to company policies, safety and ergonomic standards, and good housekeeping practices, and address non-compliant behaviors.
Periodically check molding parameters to ensure a stable and consistent production process.
Conduct light maintenance and basic troubleshooting to resolve process-related issues.
Review and address red-tagged items by taking appropriate corrective actions.
Transport molds to and from the tool shop and prepare them for setup, including any required pre-heating or preparation.
Perform minor tool repairs and de-nicking to keep molds in proper working condition.
Ensure all setup requirements, such as loader boards, preparation materials, mold release, and pre-heated molds, are available and ready before setup begins.
Support and implement health and safety policies and integrate safety considerations into daily work activities.
Perform other related duties as assigned to support the ongoing needs of the production operation.
Essential Skills
Ability to work in a fast-paced manufacturing environment.
Mechanical aptitude and willingness to work with molding machines and tools.
Capability to lift 3550 lbs on a daily basis.
Motivation to learn new skills and processes in a production setting.
Positive, eager attitude and strong work ethic.
Ability to distinguish different item codes and identify differences in molds.
Comfort with performing light maintenance and basic troubleshooting on production equipment.
Additional Skills & Qualifications
Entry-level role; no previous experience or resume required.
Previous production or manufacturing experience is a plus but not required.
Openness to candidates who speak Spanish only.
Interest in building a long-term career in manufacturing.
Willingness to work 2nd shift from approximately 2:30 PM to 11:00 PM and stay later as needed.
Willingness to work on Saturdays as part of the regular schedule.
Comfort working in an ITAR-regulated environment.
Why Work Here?
This opportunity offers structured, hands-on training in a highly organized manufacturing environment, making it ideal for individuals who want to start or grow a long-term career in production. Team members can learn new skills across different departments and processes, creating clear pathways for advancement and pay increases. The culture emphasizes safety, organization, and continuous improvement, and welcomes motivated individuals from diverse backgrounds who are ready to learn and develop.
Work Environment
The facility manufactures rubber parts for the aerospace industry using numerous injection molding machines and hot presses. It operates under lean six sigma principles and maintains an extremely organized layout, with clearly designated locations for products, tools, and office supplies. The machines can generate heat, but the building is equipped with air conditioning units that run consistently to keep the environment comfortable. This is an ITAR-regulated facility with a strong focus on safety, cleanliness, and efficient workflows. The role is on 2nd shift, typically from 2:30 PM to 11:00 PM, with the possibility of staying until 1:00 AM as needed and regular Saturday work. Work involves standing, moving around the production floor, handling molds and tools, and lifting 3550 lbs throughout the shift.
Job Type & Location
This is a Contract to Hire position based out of Santa Ana, CA.
Pay and Benefits
The pay range for this position is $20.00 - $21.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan
Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Santa Ana,CA.
Application Deadline
This position is anticipated to close on May 4, 2026.
2nd Shift
The Setter on 2nd shift is responsible for planning and performing mold changes on compression and injection molding machines, setting all process parameters to produce high-quality rubber parts for the aerospace industry. This role supports a highly organized, safety-focused manufacturing environment and offers hands-on training for individuals who are eager to build a long-term career in manufacturing.
Shift: 2:30pm - 11pm (OT after shift stay until 1am if needed)
$21/hr
Responsibilities
Perform and plan mold changes on injection and compression molding machines to ensure efficient production of quality parts.
Set and adjust process parameters such as temperature, cure time, bumping, and pressure to achieve process approval and stable production.
Carry out part changeovers and machine setups in an efficient manner to reduce downtime and scrap in line with defined targets.
Maintain strict adherence to company policies, safety and ergonomic standards, and good housekeeping practices, and address non-compliant behaviors.
Periodically check molding parameters to ensure a stable and consistent production process.
Conduct light maintenance and basic troubleshooting to resolve process-related issues.
Review and address red-tagged items by taking appropriate corrective actions.
Transport molds to and from the tool shop and prepare them for setup, including any required pre-heating or preparation.
Perform minor tool repairs and de-nicking to keep molds in proper working condition.
Ensure all setup requirements, such as loader boards, preparation materials, mold release, and pre-heated molds, are available and ready before setup begins.
Support and implement health and safety policies and integrate safety considerations into daily work activities.
Perform other related duties as assigned to support the ongoing needs of the production operation.
Essential Skills
Ability to work in a fast-paced manufacturing environment.
Mechanical aptitude and willingness to work with molding machines and tools.
Capability to lift 3550 lbs on a daily basis.
Motivation to learn new skills and processes in a production setting.
Positive, eager attitude and strong work ethic.
Ability to distinguish different item codes and identify differences in molds.
Comfort with performing light maintenance and basic troubleshooting on production equipment.
Additional Skills & Qualifications
Entry-level role; no previous experience or resume required.
Previous production or manufacturing experience is a plus but not required.
Openness to candidates who speak Spanish only.
Interest in building a long-term career in manufacturing.
Willingness to work 2nd shift from approximately 2:30 PM to 11:00 PM and stay later as needed.
Willingness to work on Saturdays as part of the regular schedule.
Comfort working in an ITAR-regulated environment.
Why Work Here?
This opportunity offers structured, hands-on training in a highly organized manufacturing environment, making it ideal for individuals who want to start or grow a long-term career in production. Team members can learn new skills across different departments and processes, creating clear pathways for advancement and pay increases. The culture emphasizes safety, organization, and continuous improvement, and welcomes motivated individuals from diverse backgrounds who are ready to learn and develop.
Work Environment
The facility manufactures rubber parts for the aerospace industry using numerous injection molding machines and hot presses. It operates under lean six sigma principles and maintains an extremely organized layout, with clearly designated locations for products, tools, and office supplies. The machines can generate heat, but the building is equipped with air conditioning units that run consistently to keep the environment comfortable. This is an ITAR-regulated facility with a strong focus on safety, cleanliness, and efficient workflows. The role is on 2nd shift, typically from 2:30 PM to 11:00 PM, with the possibility of staying until 1:00 AM as needed and regular Saturday work. Work involves standing, moving around the production floor, handling molds and tools, and lifting 3550 lbs throughout the shift.
Job Type & Location
This is a Contract to Hire position based out of Santa Ana, CA.
Pay and Benefits
The pay range for this position is $20.00 - $21.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan
Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Workplace Type
This is a fully onsite position in Santa Ana,CA.
Application Deadline
This position is anticipated to close on May 4, 2026.